Replacement Front Left Disc Brake Caliper for 2000-2011 Honda Civic, 2000-2009 Honda S2000, 2002-2006 Acura RSX (L4 2.0L)

Product Description

Brake Caliper

Features and Benefits: Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance., Pistons are durable, resistant to cracking or pitting and handle great loads., New washers are included where applicable for a proper seal., Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%., New banjo bolts are included where applicable to ensure a perfect fit and quick installation., New bleeder screws provide trouble-free bleeding and a positive seal., New stainless steel hardware clips and new mounting pins are included where applicable., Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish., Mounting bracket is included where applicable for a hassle-free installation., A plastic cap plug protects every brake port thread to ensure trouble-free installation., As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

FAQs: What type of fluid should I use: DOT 3, DOT 4, or DOT 5?, What type of grease is used on floating caliper mounting pins?, Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations., Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation., New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications., Could calipers be the cause of a low brake pedal?, Do all of your Calipers come with the new hardware and a mounting bracket for installation?, Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish., Brakes squeal all of the time. What's causing the squeal?, Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?, Car pulls to one side during braking. Why?, As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container., A silicone grease is used on floating caliper mounting pins., A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.

Piston Size (OD) (in): 2.124

Caliper Color: Gray

Piston Size (OD) (mm): 53.95

E-Waste: No

Product Condition: Remanufactured

Pads Included: No

Mounting Bolts Included: No

Bleeder Port Size: M10x1.25

Brake Caliper Finish: Oil Emulsion

Installation Hardware Included: Yes

Piston Quantity: 1

Piston Material: Steel

Package Contents: Caliper; Instruction Sheet; Bracket; Hardware Kit

Inlet Port Size: 0.39

Compatible with the following vehicles