Special Order for Hawke Vantage Scope adapter for NV kit

Item printed in PLA+ at 75% Infill

OD 46mm
ID 40mm

==============================================================

**Will also work on 40mm Eye Pieces - fits very snug indeed - but works***

If you have a Pard 007 you will already know this, but the whole experience is ruined by relying on insulation tape to fit the pard onto your scope.

The tape cant be laid true and eventually squishes down and causes pard wobble.

Also if you want to swap the pard onto your other rifles, you then are left with sticky tape on your scope eye peices.

and if you dont use tape then the pard mount will scuff your scope up.

I have designed and 3d printed this spacer which transforms the pard 007 experience, as:
1) Mounts rock solid
2) Is perfectly aligned . All I had to do was X=-24 and Y=056 to align the pard cross hairs.
3) It also stays exactly in place
4) Wont droop
5) Wont Scuff your scope
6) Is faster and cleaner when moving the pard from one rifle to another.
7) the pard can be mounted at its closest postion - which makes the end result very compact (see photo 2)

I make the spacers 34mm deep so that they insert fully into the pard mount.

This one is for a 39mm eyepiece tube (Hawke Airmax Compacts) and the 45mm Pard Spacer.

FYI Pard mounts come in 3 i/d's 43mm, 45mm and 48mm - this advert is for the spacer that fits the 45mm. 

If you require other sizes just let me know.  but be aware a 45mm spacer won't work in a 43 or 48!!!