Generation / Gen 2  Diversity Satellite with Bind Button for binding without main Receiver. Fully DSMX and DSM2 Compatible. Original UK Seller.

Includes sat cable to connect to your main receiver or flight controller plus a foam pad for installation.

All products are authorised, rebranded and supplied by Lem' RX (USA) under US Trademark Reg. No. 4968176 with shipping from UK stock. See confirmation on the Lem' RX website (Manuals page).

GEN 2  satellite receiver is DSMX / DSM2 compatible that provides superior performance with antenna diversity.  Bind button allows binding to the transmitter without having a receiver.

See below for full specs.


We always stock the FULL PRODUCT RANGE but may not all be listed as yet, please contact us if what you need is not here.

UK stock, Same day dispatch when payment is received by 3pm. (working days) Standard shipping is 2nd class, signed for and special delivery available at checkout (add to basket).

Buy with Confidence, please see our feedback from over 51,000 sales which shows all our stock is 100% genuine and we pride ourselves on our service. Original UK importer of the brand for 11+ years, Feel free to contact to confirm.


Highlight

Root729 / Lem Rx (USA) GEN2  satellite receiver is DSMX/DSM2 compatible that provides superior performance with antenna diversity.  Bind button allows binding to the transmitter without having a receiver.

- Dimension: 23mm x 22.5mm x 9mm
- 4.1 grams (with casing)
- 2.7V to 3.5V voltage input
- Bind button allows binding without a receiver nor require special initialisation sequence such as using flight controller
- Generation 2 SDR stack ensures the fastest channel searching and advanced algorithm for signal recovery with ultra-low-latency experience
- Best suited to application that requires exceptional signal performance under signal fading condition such as drone
- Antenna diversity improves the reliability of the wireless link 

Quick Reference Guide

Binding with receiver
- Connect the satellite to receiver
- Prepare the receiver in bind mode with satellite connected
- Power cycle the receiver will cause both receiver and satellite in bind mode with LED flashes.

Binding without receiver
- Connect the satellite to an appropriate device such as Flight Controller and make sure there is power provided to the satellite
- Hold the B button on the satellite for about 3 seconds. The LED flashes indicate satellite is ready to bind to a transmitter without a receiver connected.



Note:

1) This is not a Spektrum DSMX or DSM2 product, nor is it a copy of a Spektrum DSM2 or DSMX product. The Spektrum, DSMX and DSM2 brand is a trademark of Horizon Hobby, Inc.


2) This is not an underground black market fake Spektrum product. Root729 Rx / LEM RX quality is guaranteed.


3) ROOT729 RX / LEM RX (USA) products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spektrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).

The Spektrum, DX5, DX6, DSMX, and DSM2 brand is a trademark as well as or is the ownership of Horizon Hobby, Inc.