Meta alarm removal plug for the M357TV2 motorcycle alarm. Can be used as a diagnostic aid to determine where a fault lies be it with the bike or the alarm. No need to back trace & rewire the bike. Simply locate the alarm remove the cable cover, unplug the wiring loom & insert into the bypass plug & away you go. Simple plug & play bypass installation, keeps wiring intact should an alarm be required in the future. Encased in a protective cover. Supplied with easy to follow instructions with a link to a YouTube video & telephone technical support.

Will only function with the Meta M357TV2 alarm system, please contact me if unsure.

This plug will not fit the Meta M351a, M357T or the M357TV2-1, M357TV2:1. The M357TV2-1 or M357TV2:1 do not require a bypass plug, the bike will start & run whether the alarm is connected or not.

Will only fit the wiring loom fitted with the two connector plugs - see pictures 2 & 3

This quality item is manufactured by a Meta main dealer not to be confused with inferior copies from other sellers with no experience of Meta alarms & who are unable to help if technical issues occur. Complete with easy to follow instructions, a link to a YouTube video plus telephone & email technical support. Please see my feedback about this item.

Please note vehicles which have been standing a long time may not easily start or start at all, this is usually due to bad fuel, gummed up carbs/injectors, dead battery, rodent eaten wiring etc etc. This plug will allow the vehicle to function as long as the vehicle is function-able. If the bikes starts & runs but cuts out when a gear is selected means the fault is with the bike, this bypass plug will not fix the problem.

Money back guarantee, should you not be 100% satisfied with this product simply send it back for a full refund

Free 48 hour Tracked delivery same day postage if ordered before 4.30pm, Upgrade to 24 hour delivery if needed urgently (For the UK only)