Description

ESP32-S3 1.43inch AMOLED Display Development Board, 466×466, QSPI Interface Round Display, Onboard Accelerometer And Gyroscope Sensor, RTC Chip, Optional For CNC Metal Case, ESP32 With Display
ESP32-S3 1.43inch AMOLED
Development Board

466 × 466 Resolution, AMOLED Round Display, Onboard Multiple Interfaces

 ESP32-S3 Touch AMOLED 1.43, front view ESP32-S3 Touch AMOLED 1.43, features
Version options
ESP32-S3-Touch-AMOLED-1.43

ESP32-S3-Touch-AMOLED-1.43
standard version, without case

 
ESP32-S3-Touch-AMOLED-1.43-B

ESP32-S3-Touch-AMOLED-1.43-B
with CNC metal case, better protection


Product Features

This product adopts ESP32-S3R8 chip with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.43inch AMOLED display which can smoothly run GUI programs such as LVGL. Onboard rich peripheral resources such as RTC chip, QMI8658 6-axis IMU, TF card slot, Lithium battery header, etc., and reserved USB, UART, I2C and GPIO pin headers, offering strong compatibility and expandability. It is suitable for the quick development of the HMI and other ESP32-S3 applications.

  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an onboard antenna. Supports switching to use external antenna via resoldering an onboard resistor
  • Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
  • Onboard 1.43inch AMOLED display, QSPI interface, 466 × 466 resolution, 16.7M color
  • Supports capacitive touch function controlled via I2C interface, with interrupt support
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.
  • Onboard PCF85063 RTC chip with reserved SH1.0 RTC battery header (supports charging) for RTC function requirement
  • Onboard RST button and programmable BOOT button for easy custom function development
  • Onboard 3.7V MX1.25 Lithium battery recharge/discharge header
  • Onboard TF card slot for external TF card storage of pictures or files
  • Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use
  • Onboard UART and I2C SH1.0 4PIN connector, reserved 2 × 14PIN 1.27mm pitch headers, adapting multiple GPIO interfaces
  • Optional for CNC metal case, with clear and colorful label on the back, nice looking and easy to carry


AMOLED parameters
Display PanelAMOLEDDisplay Size1.43 inch
Resolution466×466Display Colors16.7M
Brightness350 cd/㎡Contrast Ratio60000:1
Communication InterfaceQSPIDriver ICSH8601/C05300
TouchSupportedTouch ICFT3168

Application Scenarios
ESP32-S3 Touch AMOLED 1.43, application scenarios
Adopts AMOLED screen

The next-generation display technology, compared to those traditional LCD displays, the AMOLED screen features precise light-control capability, representing more delicate colors, more picture details, and more vivid video image

ESP32-S3 Touch AMOLED 1.43, adopts AMOLED screen
178° wide viewing angle

Excellent Display Performance, 16.7M color, wide viewing angle

ESP32-S3 Touch AMOLED 1.43, with wide viewing angle

Supports ESP-IDF, Arduino IDE

Comprehensive SDK, dev resources, tutorials to help you easily get started

ESP32-S3 Touch AMOLED 1.43, supports ESP-IDF, Arduino

Wi-Fi and BLE 5 support

ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 ax/b/g/n) with 40 MHz of bandwidth support, Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh

ESP32-S3 Touch AMOLED 1.43, with Wi-Fi and BLE 5 support
interface definition

adapting multiple GPIO interfaces, offers strong compatibility and expandability

ESP32-S3 Touch AMOLED 1.43, interface definition
ESP32-S3 AMOLED definition
AMOLED pinESP32-S3 pinDescription
QSPI_CSGPIO9QSPI chip selection
QSPI_CLKGPIO10QSPI clock pin
QSPI_D0GPIO11QSPI D0 data
QSPI_D1GPIO12QSPI D1 data
QSPI_D2GPIO13QSPI D2 data
QSPI_D3GPIO14QSPI D3 data
AMOLED_RESETGPIO21AMOLED reset pin
AMOLED_ENGPIO42AMOLED enable pin
TP_SDAGPIO47TP I2C data pin
TP_SCLGPIO48TP I2C clock pin

What's On Board
ESP32-S3 Touch AMOLED 1.43, onboard components
  1. ESP32-S3R8
  2. 16MB Flash
  3. QMI8658 attitude sensor
    6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer
  4. PCF85063
    RTC chip
  5. 3.7V Lithium battery header
  6. TF card slot
    on the back side of the PCB
  7. RTC battery header
  8. I2C 4PIN connector
 
  1. Charge indicator
  2. USB Type-C port
  3. Power indicator
  4. UART 4PIN connector
  5. BOOT button
  6. Reset button
  7. IPEX1 connector
    Switching to use external antenna via resoldering a onboard resistor
  8. Onboard ceramic antenna


outline dimensions

ESP32-S3-Touch-AMOLED-1.43

 ESP32-S3-Touch-AMOLED-1.43, outline dimensions

ESP32-S3-Touch-AMOLED-1.43-B

 ESP32-S3-Touch-AMOLED-1.43-B, outline dimensions
Resources & Services
resources and services


Package Content

Weight: 0.037 kg

ESP32-S3-Touch-AMOLED-1.43

  1. ESP32-S3-Touch-AMOLED-1.43 x1
  2. SH1.0 4PIN cable ~100mm x2
1ESP32-S3-Touch-AMOLED-1.43
2ESP32-S3-Touch-AMOLED-1.43

ESP32-S3-Touch-AMOLED-1.43-B

  1. ESP32-S3-Touch-AMOLED-1.43-B x1
  2. SH1.0 4PIN cable ~100mm x2
1ESP32-S3-Touch-AMOLED-1.43-B
2ESP32-S3-Touch-AMOLED-1.43