Other World Computing OWC Aura Pro X2 2TB SSD upgrade solution for Mac Pro Late 2013 to 2019, model number OWCS3DAPT4MP20P. Also labeled with OWC part number OWCS3DAPT4MB20. You may be able to remove the heatsink and install in select Mac models 2013 - 2019, however I make no guarantee of compatibility. These are new, unused, drives.  The drive(s) you receive will be sealed as they were received from the manufacturer, the pictures with open packaging are for illustrative purposes only. Bulk packaging, not original packaging. Guaranteed not Dead on Arrival (DoA). No guarantee of manufacturer warranty. Includes mounting screw. Informational placard may not be included.


Includes

  • (1) OWC Aura Pro X2 Solid-State Drive
  • (1) Mounting Screw
  • (1) Heat Sink


Specs


    Capacity

    • 1920GB Useable Capacity
    • Total Capacity: 2048GB
    • 128GB Allocated to real-time data redundancy and error correction


    Formatted Capacity

    • 1788GiB


    Drive Mechanism

    • (1) 2.0TB OWC Aura Pro X2 PCIe 3.1 NVMe Solid-State Drive


    Drive Format


    Controller

    • Silicon Motion SM2262EN Series Processor with 7% over-provisioning


    NAND Flash Components

    • Synchronous Triple-Level Cell (TLC) 3D NAND Flash


    Native Command Queuing (NCQ)

    • Up to 32 simultaneous commands


    Form Factor

    • Custom Blade


    Drive Interface

    • PCIe 3.1 x4, NVMe 1.3


    Sequential Read (Max)

    • Up to 1534 MB/s


    Sequential Write (Max)

    • Up to 1353 MB/s


    Average Access Time

    • <0.1 ms


    MTBF (Mean Time Between Failures)

    • 1,500,000 hours


    TRIM Support

    • OS Dependent


    Error Correction

    • Built-in ECC


    Endurance

    • 900TB total bytes written (TBW), equal to 353 GB per day for 7 years


    Mac OS Compatibility

    • macOS 10.13 High Sierra
    • macOS 10.14 Mojave
    • macOS 10.15 Catalina
    • macOS 11.x Big Sur
    • macOS 12.x Monterey
    • macOS 13.x Ventura
    • macOS 14.x Sonoma
    • macOS 15.x Sequoia


    Other Requirements

    • The host computer must be updated to macOS 10.13 or later before installing this drive.


    Read Mode (Max)

    • Up to 5.7 Watts


    Write Mode (Max)

    • Up to 5.7 Watts


    Seek Mode (Max)

    • Up to 5.7 Watts


    Idle Mode (Max)

    • Up to 0.3 Watts


    Dimensions

    • Height: 0.3 cm (0.1 in)
    • Length: 8.9 cm (3.5 in)
    • Width: 2.2 cm (0.9 in)


    Weight

    • 9.0 g (0.02 lbs)


    RoHS Compliant

    • Yes


    Ambient Temperature

    • Operating: 32°F to 158°F (0°C to 70°C)
    • Non-Operating: -40°F to 185°F (-40°C to 85°C)


    Altitude

    • Operating: -304.8 m to 3,048.0 m (-1,000 ft to 10,000 ft)
    • Non-Operating: -304.8 m to 12,192.0 m (-1,000 ft to 40,000 ft)


    Humidity

    • Operating: 5% to 95% non-condensing


    Shock

    • Non-Operating: 1500 G max at 0.5 ms


    Idle (Typical)

    • 0.0 bels


    Seek (Typical)

    • 0.0 bels

    1. The Aura Pro X2 is a high performance PCIe 3.1 x4 NVMe SSD capable of performing in excess of 3000MB/s in Macs with PCIe 3.0 x4 SSD slot. Performance can vary depending on many factors, including the Mac model and its drive bus specifications. Please check the compatibility section and the detailed specs for your Mac model’s drive bus specifications.
    2. Sequential read/write (max) performance numbers are based on testing with AJA System Test (4K-Full resolution, 64GB file size, 16bit RGBA codec) on a 2013 Mac Pro (MacPro6,1).
    3. When upgrading from an AHCI SSD used in some older Mac models (2013-2014), you may observe a slight increase in boot times. Read the Knowledge Base article to learn more.