Ancel S110 pro Support multi system-------The necessity of smoke leakage detection
the output presure of ancel s110 pro is about 0.5psi and use for EVAP system
EVAP system
When there is a leak in the EVAP system, the engine malfunction light will light up, and the car's emissions are not environmentally friendly.
Air intake system
Leakage of the intake system can cause engine vibration, increased fuel consumption, and substandard emissions.
Exhaust system
Exhaust system leakage, increased noise generation, affecting driving
Fuel tank system
Fuel tank system leakage can cause engine shaking, knocking, and weakness
Crankcase system
Leakage of the crankcase system can result in oil leakage
Other system 
support Various Pipeline Smoke Leak Detector

2 kinds of modes: AIR model+Smoke mode
Air mode :First, use the air mode to directly measure the leak, and judge whether there is a leak by the pressure gauge value. If it is less than 0.5bar, it will inevitably leak. If it reaches 0.8bar and above, the pipeline tightness is very good.Then there is no need to waste baby oil
SMOKE MODE:After the air mode determines that there is a leak, use the smoke mode to find the leak.

ADJUSTABLE ROTARY BUTTON
Freely Adjust the Amount of Smoke Output

OVERHEAT & ANTI-FROST PROTECTION
For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehlicles, ATVS,light trucks and speedboats,Suitable for all car models.
Overheat Protection
When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off.
Anti-frost Protection
The device can also work normally at -20℃.

SPECIAL TEMPERATURE CONTROL SYSTEM

To Ensure Long Service Life And Uniform Smoke Production

Wide Range of Applications
ANCEL S110 PRO suitable for many scenarios, not just cars, but also motorcycles, boats, and pickup trucks, etc

HOW TO DO LWAKAGE TEST？
1.Fill smoke oil(pink baby oil into the unit)
2.Disconnect the pipe which connected with detector,connect to machine
3.Connect the power and turn on the air button to check if have leak
4.Turn on smoke button,then pipe will be filled with smoke,Check the leak points