ONE YEAR WARRANTY

 

Feature:

Placement on Vehicle	Front Left Right
Type	Regulator & Motor Assembly
Operating Mode	Electric
Motor Included	Yes
OE/OEM Part Number	741-674,741-754
Custom Bundle	Yes
Package Contents	2 Power Window Regulator
Packaging Type	Box
Manufacturer Warranty	1 Year
Superseded Part Number	Front Driver and Passenger Side Replacements
Surface Finish	Smooth
Product Fit	Direct fit
Attachment Type	Bolt On
Performance Part	Yes
Modified Item	No
Installation Instructions Included	No
Gear Material	Plastic
Frame Material	Metal and Plastic
Mounting Hardware Included	No
Fitment Type	Direct Replacement
Weight	about 10 lbs
Fitment(Note)	Verify this part fits your vehicle using the compatibility chart
Housing Material	Steel

Interchange Part Number: 741-754,741-674,F6TZ 1523208-AA

 

Application:
1980-1996 Ford Bronco Front Left & Right
1980-1983 Ford F-100 Front Left & Right
1980-1996 Ford F-150Front Left & Right
1980-1996 Ford F-250 Front Left & Right
1997 Ford F-250 HD Front Left & Right
1980-1997 Ford F-350 Front Left & Right
1988-1996 Ford F-53 Motorhome Chassis Front Left & Right
1988-1996 Ford F-59 Commercial Stripped Chassis Front Left & Right
1988-1996 Ford F-Super Duty Front Left & Right

 

Package Included:
1 pair of Window regulators with Motor in a box

 

Install the window regulator as follows:

Part 1 Disconnecting the Window from the Motor
1. Remove the interior door panel.
2. Gently remove the plastic door cover.
3. Locate the window mounting bolts.
4. Move the window if necessary to access the bolts.
5. Remove the bolts while a friend supports the window.
6. Raise the window up into the door frame.
7. Use masking tape to secure the window in place.

Part 2 Disconnecting the Motor and Regulator
8. Remove the window regulator bolts.
9. Locate and remove the window motor mounting bolts.
10. Disconnect the motor wiring harness connector.
11. Remove the motor and regulator through the access port.
12. Connect the regulator to the new motor.

Part 3 Installing a New Power Window Motor
13. Slide the new motor and regulator back into place.
14. Replace the mounting bolts.
15. Reconnect the electrical connector.
16. Remove the masking tape and lower the window back down.
17. Insert the window mounting bolts.
18. Reinstall the plastic liner and interior panel.