• Fit Vehicles:
  •  
  • 1996-1997 Geo Prizm 1.6L 1995-1997 Geo Prizm 1.8L 1996-1997 Toyota Corolla 1.6L 1997-1998 Toyota Paseo 1.5L 1997-1998 Toyota Tercel 1.5L
  •  
  • Features:
  •  
    • Extensively Tested During Manufacture to Guarantee Quality and Reliability
    • Supplied With a Factory-Fitted Connector for Easy Installation
    • Precision manufactured with a sensing element incorporating premier technical ceramics
     
  •  
  • Where are my oxygen sensors located?
  •  
  •  
  • Diagnostic Trouble Codes (DTC)
  • 2pcs for 1996-1997 Toyota Corolla 1.6L Upstream Downstream Oxygen Sensor O2 02

    Fit Vehicles:

     

    1996-1997 Geo Prizm 1.6L
    1995-1997 Geo Prizm 1.8L
    1996-1997 Toyota Corolla 1.6L
    1997-1998 Toyota Paseo 1.5L
    1997-1998 Toyota Tercel 1.5L

     

    Features:

     

    • Extensively Tested During Manufacture to Guarantee Quality and Reliability
    • Supplied With a Factory-Fitted Connector for Easy Installation

    • Precision manufactured with a sensing element incorporating premier technical ceramics

     

     

    Where are my oxygen sensors located?

     

     

    Diagnostic Trouble Codes (DTC)


    When oxygen sensor failure occurs, a DTC is recorded in the Engine Control Unit (ECU) and a Malfunction Indicator Lamp (MIL) is illuminated on the dash, alerting the driver the vehicle has a problem.

     

    How to replace an oxygen sensor?

     

    1- Disconnect the battery.

    2- Locate the sensor connector by following its wires. Disconnect it.?

    3- Remove the sensor cable from its clips all along its way to the sensor.

    4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily.

    5- Remove the sensor and fit the new one.

    6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector.

    7- Reconnect the battery and wait 5 minutes before starting the engine. 

     

                   

                   

            

     

     

    Please take a video clip of the voltmeter and contact us if our sensor:

     

    Goes above range between 0.1 and 0.9 volt
    Remains below 0.5 volts
    Stays fixed at a particular voltage
    You're free to choose replacement or refund if our sensor fails to work, in this case.



    Payment

    We will only ship to the confirmed shipping address given with the payment.

    We do not offer local pickups.

    Shipping

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. The images shown are not the actual item and are for your reference only.

    3. Fast shipping:All our packages use USPS Package Service

    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. You have 7 days to contact us and 10 days to return it from the date it was received.

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    Contact Us

    We are always been trying to provide best service and reliable products for every customer.


    If you are satisfed with the product you recieved,please leave us positive feedback.


    If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Shop Category
    2pcs for 1996-1997 Toyota Corolla 1.6L Upstream Downstream Oxygen Sensor O2 02

    Fit Vehicles:

     

    1996-1997 Geo Prizm 1.6L
    1995-1997 Geo Prizm 1.8L
    1996-1997 Toyota Corolla 1.6L
    1997-1998 Toyota Paseo 1.5L
    1997-1998 Toyota Tercel 1.5L

     

    Features:

     

    • Extensively Tested During Manufacture to Guarantee Quality and Reliability
    • Supplied With a Factory-Fitted Connector for Easy Installation

    • Precision manufactured with a sensing element incorporating premier technical ceramics

     

     

    Where are my oxygen sensors located?

     

     

    Diagnostic Trouble Codes (DTC)


    When oxygen sensor failure occurs, a DTC is recorded in the Engine Control Unit (ECU) and a Malfunction Indicator Lamp (MIL) is illuminated on the dash, alerting the driver the vehicle has a problem.

     

    How to replace an oxygen sensor?

     

    1- Disconnect the battery.

    2- Locate the sensor connector by following its wires. Disconnect it.?

    3- Remove the sensor cable from its clips all along its way to the sensor.

    4- A specific 22mm socket with side cut out exists (see below). You can use a spanner instead. Hold it in one hand and give it a firm hit with the other hand. It will then unscrew very easily.

    5- Remove the sensor and fit the new one.

    6- Re-route the cable carefully and meticulously and fix it at every clip. Reconnect the connector.

    7- Reconnect the battery and wait 5 minutes before starting the engine. 

     

                   

                   

            

     

     

    Please take a video clip of the voltmeter and contact us if our sensor:

     

    Goes above range between 0.1 and 0.9 volt
    Remains below 0.5 volts
    Stays fixed at a particular voltage
    You're free to choose replacement or refund if our sensor fails to work, in this case.



    We will only ship to the confirmed shipping address given with the payment.

    We do not offer local pickups.

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. The images shown are not the actual item and are for your reference only.

    3. Fast shipping:All our packages use USPS Package Service

    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. You have 7 days to contact us and 10 days to return it from the date it was received.

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    We are always been trying to provide best service and reliable products for every customer.


    If you are satisfed with the product you recieved,please leave us positive feedback.


    If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.


    Copyright of autoutdoor. All rights reserved.