High Torque Long Shaft Hands Quartz DIY Wall Clock Movement Mechanism w

---

 Buy Now

---

• High torque clock movement with metal hook: I shaft, long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands(2 black and 1 gold),drive long clock hands (10 mm to 450 mm. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.
• Accurate time-keeping motor:Size-total shaft length is 31 mm (1-1/5 inch), thread length is 20.4 mm (4/5 inches); suitable for 12 - 16 mm (12/ 25 - 5/ 8 inches) thickness clock panel; Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; powered by a AA battery.
• Three of most popular clock hands: Different Sizes,Colors and Styles. Meet different needs only in one package,perfect for your clock creations; get to pick out the style and length of the hands that look best with your clock at no additional charge.The Diameter of Clock Panel should be longer than 430mm /16.93in. The clock hands should be less than 610mm / 24.02in.
• Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements.
• Package contents: a clock movement,a Metal hook, a Golden end cap,3 Minute hands,3 Hour hands,3 Plastic washers,3 Brass washers and 3 Brass nuts,come with the specially designed protect box.

Features: Good clock replacement: This kit is good size replacement both in terms of the shaft and the size of the hands. It can be a replacement for your broken clock. Simple style clock movement: It can match to diverse colors, patterns,shapes clock panel, it will not stand out, good movement will work well. Simple design, easy to use. Wide application: You are enable to use it to repair,replace or make a clock; Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc. Material: plastic and aluminum Second hand motion: Jump Accuracy Within ±30seconds deviation each month (in normal temperature) Power: 1.5 V AA 1 x battery (not included) Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement. Dimensions: Case size: approx. 56 x 56 x 17 mm (2.2 x 2.2 x 0.67inches) Package included: 1 x Quartz clock movement 3 x Minute hand 3 x Hour hand 3 X Plastic washer 3 X Brass washer 3 X Brass nut 1 X Golden end cap 1 x Metal hook 1 x User manual Kindly note: - The hour and minute hands had a protective plastic coating that needs to be carefully removed. - Be careful not to bend the hands with too much pressure. - Do not tighten the brass hex nut too tight - Press hard to get all clock hands in place - Check if all hands are aligned - Check the size before buying.