Hommix 800GPD Diaphragm Self Priming Booster Pump for Reverse Osmosis (RO) Systems

800 GPD Diaphragm Pump For Reverse Osmosis (RO) Systems Robust diaphragm pump specifically designed for residential RO (Reverse Osmosis) systems, ensuring efficient water filtration and supply. With a focus on reliability, efficiency, and ease of use, this pump is engineered to deliver consistent water pressure and flow, making it an ideal choice for enhancing the performance of your water filtration setup. Key Features: Maintains high water pressure stably over extended periods. Low power consumption for cost-effective operation. High water flow rate ensures optimal filtration efficiency. Minimal noise output for a quieter environment. Certifications: CE - RoHS - FDA - IPX4 Service Conditions: Ambient temperature range: -4°C to +40°C. Relative humidity: Less than 90% at +25°C. Inlet water pressure: 0.1Mpa to 0.4Mpa. Inlet water temperature range: +5°C to +38°C. Power supply voltage: (24±0.5)V DC. Technical Specifications: Cooling Type: Natural cooling. Voltage: 24VDC. Inlet Pressure: 20PSI. Normal Pressure: 70PSI. Flow Rate: ≥270L/H at 70PSI. Current: ≤3.0A at 70PSI; ≤4.8A at 140PSI. Motor Temperature: ≤55°C after 24 hours. Noise Level: ≤53dB. Dimensions: Inlet/Outlet Size: 3/8" pipe thread. Power Cable Length: Approximately 320mm. Pump Performance Curve: Graphical representation of pressure (0-160 PSI) versus flow rate (0-400 L/min). As pressure increases, flow rate decreases (indicated by descending blue line). Please note: The transformer is not included with the pump and must be purchased separately.SKU: HMX-PSU-600-800 Maintenance Notes: Pump Position: Must be installed upright or flatwise. Water Filter: For Use With RO Systems Disassembly: Not advised without technician approval. Medium Restrictions: No grease or chemical liquids; avoid corrosive gases. The 800-GPD Pump is a reliable and efficient solution for residential water filtration systems, providing consistent water pressure and flow for superior filtration performance. With its low power consumption, high flow rate, and minimal noise output, it's an ideal choice for enhancing the efficiency of your RO system.

Hommix 800GPD Diaphragm Self Priming Booster Pump for Reverse Osmosis (RO) Systems

800 GPD Diaphragm Pump For Reverse Osmosis (RO) Systems

Robust diaphragm pump specifically designed for residential RO (Reverse Osmosis) systems, ensuring efficient water filtration and supply.

With a focus on reliability, efficiency, and ease of use, this pump is engineered to deliver consistent water pressure and flow, making it an ideal choice for enhancing the performance of your water filtration setup.

Key Features:

Maintains high water pressure stably over extended periods.
Low power consumption for cost-effective operation.
High water flow rate ensures optimal filtration efficiency.
Minimal noise output for a quieter environment.
Certifications: CE - RoHS - FDA - IPX4

Service Conditions:

Ambient temperature range: -4°C to +40°C.
Relative humidity: Less than 90% at +25°C.
Inlet water pressure: 0.1Mpa to 0.4Mpa.
Inlet water temperature range: +5°C to +38°C.
Power supply voltage: (24±0.5)V DC.

Technical Specifications:

Cooling Type: Natural cooling.
Voltage: 24VDC.
Inlet Pressure: 20PSI.
Normal Pressure: 70PSI.
Flow Rate: ≥270L/H at 70PSI.
Current: ≤3.0A at 70PSI; ≤4.8A at 140PSI.
Motor Temperature: ≤55°C after 24 hours.
Noise Level: ≤53dB.

Dimensions:

Inlet/Outlet Size: 3/8" pipe thread.
Power Cable Length: Approximately 320mm.

Pump Performance Curve:

Graphical representation of pressure (0-160 PSI) versus flow rate (0-400 L/min).
As pressure increases, flow rate decreases (indicated by descending blue line).

Please note: The transformer is not included with the pump and must be purchased separately.

SKU: HMX-PSU-600-800

Maintenance Notes:

Pump Position: Must be installed upright or flatwise.
Water Filter: For Use With RO Systems
Disassembly: Not advised without technician approval.
Medium Restrictions: No grease or chemical liquids; avoid corrosive gases.

The 800-GPD Pump is a reliable and efficient solution for residential water filtration systems, providing consistent water pressure and flow for superior filtration performance. With its low power consumption, high flow rate, and minimal noise output, it's an ideal choice for enhancing the efficiency of your RO system.