• Fits:
  •  
  • 2002-2006 Toyota Camry 2004-2008 Toyota Solara
  •  
  • Features:
  •  
  • Easy Installation
  • High flow design provides long lasting, efficient cooling Factory lubricated for long life Precision ground shaft and hub accept fan clutches perfectly Quality forged housing is specially formed to ensure maximum coolant flow Precision built and balanced - Pressed on impeller increases water flow Unitized seal protects bearings - Provides long life and leak free performance

    • Engine Radiator and Cooling Fan Kit For 2002-2006 Toyota Camry 2004-2008 Solara

    Fits:

     

    2002-2006 Toyota Camry
    2004-2008 Toyota Solara

     

    Features:

     

    Easy Installation

    High flow design provides long lasting, efficient cooling
    Factory lubricated for long life
    Precision ground shaft and hub accept fan clutches perfectly
    Quality forged housing is specially formed to ensure maximum coolant flow
    Precision built and balanced - Pressed on impeller increases water flow
    Unitized seal protects bearings - Provides long life and leak free performance

    The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.

     

    Note:

    It is recommended to replace your Radiator Fan Clutch & Water Pump at the same time. The two parts age at the same rate so if one has failed, the other is probably not far behind. The fan clutch and water pump are also connected by the same shaft. When one part fails it typically affects the operation of the other. To prevent premature failure of your new unit, it is wise to replace both at the same time.

     

    Radiator Notes:

    Specification:

    Core Material: Aluminum

    Tank Material: Plastic

    Quantity: 1pcs Radiator

    Warranty:1 Year limited

    Direct Replacement

    100% brand new radiator (as picture showed)

    --------------------------------------------

    ? Installation guidelines provided in the box

    ? Premium OE hardware and fittings included in every box

    ? OE design to ensure exact fit, form and function for an easy drop-in installation

    ? Maximum cooling efficiency and perfect fit

    ? Leak-tested aftermarket radiator

    ? SO 9001 certified manufacturing plants

     

    How to replace a new radiator?

    1. Disconnect the battery.

    2. Drain the radiator fluid into a suitable container.

    3. Remove the old radiator:

    -Take off any plastic covers around the radiator.

    -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.

    -Disconnect the radiator hoses from the radiator.

    -Disconnect the transmission cooling lines from the bottom of the radiator.

    -Remove any clamps, brackets, or screws holding the radiator inside its frame.

    -Lift the radiator up and out of the car.

    4. Install the new radiator:

    -Slide the new radiator into place.

    -Connect any clamps or brackets that hold the radiator in place.

    -Connect the transmission cooling lines carefully.

    -Connect the engine cooling hoses to the radiator.

    -Replace the fan and fan shroud.

    -Reconnect the fan electrical connection.

    -Replace the plastic covers.

    5. Fill the radiator with fluid.

    6. Check your work to make sure that there are no leaks.

    (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

    Note:Do please keep children and pets away when replacing the radiator)

    -----------------------------------------------------------------------------

    Attention:

    ? project operation, the vehicle normal temperature 60 to 80 degrees.

    ? add detergent if the tank is too full can take some antifreeze.

     



    content_src_url


    Item Specifics
    Manufacturer Part Number :IG837431CO
    Brand :Ignition
    Fitment Type :Direct Replacement
    Warranty :1 Year
    Condition :New
    Custom Bundle :No
    Placement on Vehicle :Front
    Type :Radiator and Cooling Fan
    Interchange Part Number :Radiator and Cooling Fan
    Other Part Number :Electric Radiator Condenser Cooling Fan
    Superseded Part Number :Engine Aluminum Radiator and Dual Cooling Fan
    Listing Include :1X Radiator,1X Cooling Fan
    Voltage :12V
    Cooling Fan Plug Pin Number :2/2
    Cooling Fan Amp Draw :5.8/5.8
    Radiator Height(inch) :28.66
    Radiator Width(inch) :15.75
    Radiator Thickness(inch) :0.63

    Shipping
     
    1.Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
     
    2.USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
     
    3.We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
     
    4.Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
     
    5.Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more.
    Warranty

    1.The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS.


    2.VAP-AUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.


    3.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues within 60 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.


    4.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues after 60 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.


    5.VAP-AUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.

    Return

    The process for returns: 

    1. Begin a Return Request on your eBay account. 

    2. You will be sent a return label via eBay

    Feedback

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive Feedback is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give  us neutral or negative feedback, so that   we can satisfactorily address your concerns.

    Warning

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.

    Best Sales
    Newly Listed
    Terms & Contact
    Shipping Policy
    Payment Policy
    Return Policy
    FAQ
    About Us
    Engine Radiator and Cooling Fan Kit For 2002-2006 Toyota Camry 2004-2008 Solara

    Fits:

     

    2002-2006 Toyota Camry
    2004-2008 Toyota Solara

     

    Features:

     

    Easy Installation

    High flow design provides long lasting, efficient cooling
    Factory lubricated for long life
    Precision ground shaft and hub accept fan clutches perfectly
    Quality forged housing is specially formed to ensure maximum coolant flow
    Precision built and balanced - Pressed on impeller increases water flow
    Unitized seal protects bearings - Provides long life and leak free performance

    The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.

     

    Note:

    It is recommended to replace your Radiator Fan Clutch & Water Pump at the same time. The two parts age at the same rate so if one has failed, the other is probably not far behind. The fan clutch and water pump are also connected by the same shaft. When one part fails it typically affects the operation of the other. To prevent premature failure of your new unit, it is wise to replace both at the same time.

     

    Radiator Notes:

    Specification:

    Core Material: Aluminum

    Tank Material: Plastic

    Quantity: 1pcs Radiator

    Warranty:1 Year limited

    Direct Replacement

    100% brand new radiator (as picture showed)

    --------------------------------------------

    ? Installation guidelines provided in the box

    ? Premium OE hardware and fittings included in every box

    ? OE design to ensure exact fit, form and function for an easy drop-in installation

    ? Maximum cooling efficiency and perfect fit

    ? Leak-tested aftermarket radiator

    ? SO 9001 certified manufacturing plants

     

    How to replace a new radiator?

    1. Disconnect the battery.

    2. Drain the radiator fluid into a suitable container.

    3. Remove the old radiator:

    -Take off any plastic covers around the radiator.

    -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.

    -Disconnect the radiator hoses from the radiator.

    -Disconnect the transmission cooling lines from the bottom of the radiator.

    -Remove any clamps, brackets, or screws holding the radiator inside its frame.

    -Lift the radiator up and out of the car.

    4. Install the new radiator:

    -Slide the new radiator into place.

    -Connect any clamps or brackets that hold the radiator in place.

    -Connect the transmission cooling lines carefully.

    -Connect the engine cooling hoses to the radiator.

    -Replace the fan and fan shroud.

    -Reconnect the fan electrical connection.

    -Replace the plastic covers.

    5. Fill the radiator with fluid.

    6. Check your work to make sure that there are no leaks.

    (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

    Note:Do please keep children and pets away when replacing the radiator)

    -----------------------------------------------------------------------------

    Attention:

    ? project operation, the vehicle normal temperature 60 to 80 degrees.

    ? add detergent if the tank is too full can take some antifreeze.

     


    Shipping
     
    1.Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
     
    2.USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
     
    3.We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
     
    4.Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
     
    5.Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more.
    Warranty

    1.The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS.


    2.VAP-AUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.


    3.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues within 60 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.


    4.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues after 60 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.


    5.VAP-AUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.

    Return

    The process for returns: 

    1. Begin a Return Request on your eBay account. 

    2. You will be sent a return label via eBay

    Feedback

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive Feedback is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give  us neutral or negative feedback, so that   we can satisfactorily address your concerns.

    Warning

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.


    Copyright of VAP-AUTOPARTS. All rights reserved.