Vehicle Fitment：
For 2014-2020 Chevrolet Silverado 1500 5.3L V8
For 2015-2021 Chevrolet Suburban 5.3L V8
For 2015-2021 Chevrolet Tahoe 5.3L V8
For 2014-2020 GMC Sierra 1500 5.3L V8
For 2019 GMC Sierra 1500 5.3L Limited 5.3L V8
For 2015-2021 GMC Yukon 5.3L V8
Specification
Brand New Electronic Throttle Body
100% electrically tested prior to leave the factory
Built to strict quality control standards
Items Included:One Complete Throttle Body w/Sensor
Features:Electrical
Placement on Vehicle : Front
Housing Length (in) : 7
Mount Hole Quantity : 4
Connector Quantity : 1
Terminal Quantity : 6
Throttle body installation:
(1) Clean the installation face of the intake manifold, install the throttle body assemblyto the intake manifold interface, and tighten the screws；
(2) Install water pipes and other hoses；
(3) Plug in the wiring plug of the throttle body；
(4) Connect the air intake hose and tighten the locking ring.
2. Matched
High idle or unsteady idle will generally occur after the throttle body is replaced, or an engine failure light;
This is because the car ECU stores the original throttle body parameters, and the newly installed throttle bpdy parameters are inconsistent withthe original;
At this point, the throttle body needs to be matched by computer. The matching process is to erase the original memory of THE ECU and start the self-learning process again.
In cases where there is no matching computer or the computer cannot match, the following manual method can be used to match.
Method 1: The negative electrode of battery line can be disconnected to eliminate the memory function of ECU, and it can be installed after 1 minute.
Method 2:Turn off the ignition switch and remove the EFI and ETCS fuses in the fuse box in the engine compartment.
The above two methods are to eliminate the memory of THE ECU. If the idle speed is still high at this time, the ECU can return to normal speed through 1 to 2 days of self-learning.
3. Common throttle body faults and causes
(1) Throttle body cannot open: accelerator pedal position sensor, throttle body motor, ECU,
Power supply and circuit, throttle body internal stuck;
(2) Insufficient throttle body opening: throttle body stuck, accelerator pedal position sensor, throttle body position sensor, safety mode;
(3) Idle low or high: throttle body stuck, excessive carbon accumulation in throttle body and inlet, leakage in intake pipe and various valve connections, initialization or idle learning not set;
4. Quality problems and phenomena of throttle body itself
(1) Incorrect intake volume of throttle body:
(Electronic and semi-electronic) throttle body Butterfly valve stuck;
Judgment method: Pull the Butterfly valve to fully open and fully closed by hand and then slowly put it back to check whether the throttle valve piece returns to the correct initial position smoothly;
Excessive carbon accumulation in inlet.
- We accept online payment.
- All major credit cards are accepted through secure payment processor PayPal.(* If you use e-check on PayPal, delivery may take longer, as we will hold your order until your e-check clear)
- Payment must be received within 7 business days of auction closing.
- Please make sure your PayPal and eBay address is correct. If not, please correct it before payment. Thank you.
- Custom duties, taxes, or charges are not included in the cost you pay to us.
- Please check with your country's customs office to determine what these additional costs will be prior to bidding/ buying.
- We Ship to Worldwide, except China (Hong Kong), and we do not ship to APO/FPO.
- Orders processed within 12-24 hours of payment verification.( On Sundayis our rest day).
- Before buying, Please make sure your PayPal and eBay address is correct. If not, please correct it before payment.if you want me send the item to another address,please send me a message.
- If you have not received your shipment within 40 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
- Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
- Many of our products have overseas warehouses, including Australian warehouses, American warehouses and British warehouses.
- If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
- Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID.
- We act as a responsible seller; we are willing to actively undertake the following responsibilities:
a. The item is lost during transit;
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.
- Very appreciated for your support. We hope you are happy with your purchase.
- We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if you are not satisfied with the item after receiving it.
- If you have any problem, please feel free to contact us via ebay message, we will reply your email within 24 hours (except weekends and holidays). We will do our best to solve your problem as soon as possible.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately.
- Before you give us neutral or negative Feedback, so that we can satisfactorily address your concerns.
- Good communication can fix all problems, we always believe that as long as you are willing to communicate with us, we will give you a satisfactory answer.Thank you for choosing us and have a great day!
- Welcome to my shop,We offer an extensive range of products selected by our professionals.superiority in details and quality is a high priority. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality.
- As an internet seller, we collaborate with excellent international transport companies, and in Australia and the United States we have our own warehouses, offering the most convenient delivery service possible. On-time shipping and reliable quality control are key areas of importance in our shop.
- We are increasingly expanding international markets based on high quality products, excellent service, reasonable prices and timely delivery. Please contact us at any time for more information.We work hard to make sure EVERY CUSTOMER 100% approvingly.
Vehicle Fitment：
For 2014-2020 Chevrolet Silverado 1500 5.3L V8
For 2015-2021 Chevrolet Suburban 5.3L V8
For 2015-2021 Chevrolet Tahoe 5.3L V8
For 2014-2020 GMC Sierra 1500 5.3L V8
For 2019 GMC Sierra 1500 5.3L Limited 5.3L V8
For 2015-2021 GMC Yukon 5.3L V8
Specification
Brand New Electronic Throttle Body
100% electrically tested prior to leave the factory
Built to strict quality control standards
Items Included:One Complete Throttle Body w/Sensor
Features:Electrical
Placement on Vehicle : Front
Housing Length (in) : 7
Mount Hole Quantity : 4
Connector Quantity : 1
Terminal Quantity : 6
Throttle body installation:
(1) Clean the installation face of the intake manifold, install the throttle body assemblyto the intake manifold interface, and tighten the screws；
(2) Install water pipes and other hoses；
(3) Plug in the wiring plug of the throttle body；
(4) Connect the air intake hose and tighten the locking ring.
2. Matched
High idle or unsteady idle will generally occur after the throttle body is replaced, or an engine failure light;
This is because the car ECU stores the original throttle body parameters, and the newly installed throttle bpdy parameters are inconsistent withthe original;
At this point, the throttle body needs to be matched by computer. The matching process is to erase the original memory of THE ECU and start the self-learning process again.
In cases where there is no matching computer or the computer cannot match, the following manual method can be used to match.
Method 1: The negative electrode of battery line can be disconnected to eliminate the memory function of ECU, and it can be installed after 1 minute.
Method 2:Turn off the ignition switch and remove the EFI and ETCS fuses in the fuse box in the engine compartment.
The above two methods are to eliminate the memory of THE ECU. If the idle speed is still high at this time, the ECU can return to normal speed through 1 to 2 days of self-learning.
3. Common throttle body faults and causes
(1) Throttle body cannot open: accelerator pedal position sensor, throttle body motor, ECU,
Power supply and circuit, throttle body internal stuck;
(2) Insufficient throttle body opening: throttle body stuck, accelerator pedal position sensor, throttle body position sensor, safety mode;
(3) Idle low or high: throttle body stuck, excessive carbon accumulation in throttle body and inlet, leakage in intake pipe and various valve connections, initialization or idle learning not set;
4. Quality problems and phenomena of throttle body itself
(1) Incorrect intake volume of throttle body:
(Electronic and semi-electronic) throttle body Butterfly valve stuck;
Judgment method: Pull the Butterfly valve to fully open and fully closed by hand and then slowly put it back to check whether the throttle valve piece returns to the correct initial position smoothly;
Excessive carbon accumulation in inlet.