StewMac Parsons Street Humbucker Pickups Straight-up raw vintage tone! Closely modeled after outstanding original P.A.F.s, these humbuckers capture the tone that changed music forever. Just like the originals, the slug coil has more windings than the polepiece coil, and both coils are unpotted. Old P.A.F.s weren't made in separate neck and bridge-position models, and their DC resistance varied from 7-9K ohms. We give you a choice: Parsons Street neck position pickups are wound to mid 7K range, and bridge position models to low 8K range. Specs Vintage medium output humbucker Nickel-silver cover for tone transparency Original 1.970" (50mm) polepiece spread (neck and bridge) Plain enameled 42 AWG coil wire Unpotted like the originals Vintage construction—black paper coil tape, wood spacer, nickel-silver baseplate Choice of Alnico 2 or Alnico 5 magnet Single-conductor braided shield lead wires Your choice of original-style magnets: Alnico 2 for warm tone with smooth highs and a soft bottom response. Alnico 5 produces a clear tone with more pronounced highs and a tighter low end. (Original P.A.F.s contained Alnico 2, 3 and 5 magnets at various times.) Output Neck positon: 7K ohm range Bridge position: 8K ohm range Dimensions Length including mouting tabs: 3.307" (84mm) Length not including mouting tabs: 2.750" (70mm) Mounting screw spacing: 3.007" (76.4mm) Width: 1.41" (36mm) Height including mounting tabs: 1.130" (28.7mm) Height adjustment screws, springs and wiring diagrams included.