eBay

XV3 DR1(DRone) - Heavy Lift UAV/Drone KIT

Specifications

a) XV3 Heavy Lift Carbon Fiber and Aluminum Drone Platform

b) 6 Model Drone Motors (60KG Maximum Combined Thrust)

KV Value: 100 RPM/V

Maximum Thrust (Single Motor): 10kg (All Motors): 60kg

Internal Resistance: 5mΩ

Lead: Enameled Wire

Weight(each) Including Cables: 695g

No. of Cells (Lipo) 6-12S

Max Continuous Power 60A:1200W

Motor Dimensions: ø92x40mm

Idle Current@10v

c) 3 Sets of CCW and CW Foldable Carbon Fiber Propellers (24" Diameter when Open)

Model: P2409

Diameter x Pitch: 27 × 9 inch

d) 6 XV3 Electronic Speed Controller

Model: XV3050

Max. Operating Current: 50A

Rated Operating Voltage: 24V

Total Platform Dimensions:

2170 × 2170 × 750 mm (CF Propellers unfolded)
680× 680 × 750 mm (CF Propellers and CF Arms folded)

Supported Platform Weight:

Empty Weight: 15kg (33LBs) - payload system excluded
Ideal Takeoff Weight: 30kg (66LBs) - Factors in Camera System, Payload and 20,000mAH batteries
Maximum Takeoff Weight: 35kg for rated takeoff weight
Arm Material: Plastic and Carbon Fiber(CF) composite

High Precision Positioning Duration with Data Latency of ≤400s

Maximum Flight Speed (Good GNSS Signal) of 15m/s

Recommended Maximum Flight Altitude: 100m

Recommended Flight Altitude For Ground Penetrating Radar Operations ≤ 6 meters

Hovering Precision (Good GNSS Signal):

RTK Enabled: ±10cm (Horizontal), ±10cm (Vertical)
RTK Disabled: ±0.6m (Horizontal), ±0.3m (Vertical)
(Radar function enabled: ± 0.1m)

Hovering Duration:

30 min (with no-load @20000 mAH & takeoff weight: 18kg)
20 min (with full-load @20000 mAH & takeoff weight: 25kg)

Available Custom Optional Add-ons

1) Get Kit as a Fully Assembled Platform with 20,000mAH Battery (+$2,500)

2) Get Kit as a Fully Assembled and Ready to Fly Platform with 40,000mAH Battery and High Precision Commercial Flight Controller & UAV Remote for controlling 3 aircrafts (+$4,500)

3) Request Custom UAV Hardware & AI Software Consultancy, Site Visits, Site Deployment, or Operational Training - (prices per full workday for site visits will
depend on distance. Our regular UAV or AI work is billed at $200-300/HR + Additional Hardware costs, all dependent on scope of work needed)

4) XV3 AI Based Disease & Pest Management System ($200-300/HR + Additional Hardware Costs)

Allows for smart farming via GPS mapping of farms, followed by intelligent monitoring and early detection of diseases and pests. Pesticide and Herbicide usage can then be minimized to only those areas or crops needing it. Taps into our Machine vision and AI Software development expertise for maximum results.

5) XV3 Active Low Power Terrain/Altitude Radars (+$500)

Altitude Detection within the altitude detection range: 1-90 m

Altitude Detection within fixed altitude range: 1.5-30 m

6) XV3 Obstacle Avoidance Radars (+$1,500)

General Obstacle Avoidance sensible distance: 1.5-20 m

FOV:±90° horizontal, ±60° vertical

Radar conditions: Available during takeoff, landing, and ascending when an obstacle is more than 1.5 m away from the aircraft and the flight speed does not exceed 15 m/s

Safe distance: 2.5 m (distance between the propeller tip and obstacle when hovering after braking)

Other Optional Radar Features: Custom AI Software enabled Detection

7) XV3 Vision System for AI and Machine Learning ($850)

Dimensions: 70 × 40 × 25mm

Operating Voltage: 24 - 60V

Resolution:1080P/720P

Encoding Format: H.264

Frame Rate: 30fps

Focal Length: 28mm

Image Sensor: 1/2.9-inch CMOS sensor

8) XV3 Hybrid Axial Flux Power System For up to 2 hours of Extended Flight ($4,800)

Engine Fuel: Petrol

Generator: 4KW

Battery Backup: 12S LiFePO4 Battery

Rated Capacity: 20000mAh

Rated Output: 22.2 V/60A

Maximum Charging Current: 60A(15C)

Recommended Charging Temperature: 10 - 45℃

9) XV3 BMS Charge System ($750)

Charging Adaptor Quantity: 1

Input Voltage:

AC90-165V~50/60Hz 23A(Max)
AC180-260V~50/60Hz 23A(Max)

Output Voltage & Current:

DC50-60V/25A (Max)/1250W (AC 90-165V~50/60Hz)
DC50-60V/50A (Max)/2500W (AC 180-260V~50/60Hz)

Recommended Operating Temperature: -20 ~ 40℃

10) XV3 Portable Super Charge Station For Battery Powered Systems ($2,900)

Number Of Cylinders: One

Net Weight: 27kg

Startup: Electrical starting

Compression Ratio: 8.5:1

Tank Capacity: 15L

Air Intake: Natural Respiration

Ignition: Spark Ignition

Fuel Consumption: ≤ 0.6L/KW.h (25℃, 0 altitude, 92# unleaded gasoline under national standards charging power of 3.4 KW)

No-load Speed: 2600 RPM

Noise:≤ 88db(A)@1M

Rated Charging Power: 3.4KW

Max Output: 6KW

Service Life: > 1000 hours

Total Displacement: 223CC

Pollutant Emission: GB Stage II

11) XV3 RTK Smart Control Communication & Control System ($1,800)

Compatible Device: XV3 UAV

Operating Frequency: 2.4000GHz to 2.4835GHz

Signal Range (No Interference / Obstruction): 5000m

Power Consumption: < 15W

Recommended Operating Temperature: -20 ~ 55℃

Recommended Charging Temperature: 0 ~ 45℃

12) Other Available Custom Add-ons (Contact us for quotes on these custom systems)

AI Trained Object Detectors
Multi-Spectral Camera Systems
Aerial LiDAR
Ground Penetrating Radar
Synthetic Aperture Radar
Emergency Crowd Control System
Object Machine Vision and Other Laser Systems
Industrial and Professional Grade Aerial Camera Platform for Cinema & Movie Professionals

Available Custom Optional Add-ons

1) Get Kit as a Fully Assembled Platform with 20,000mAH Battery (+$2,500)

2) Get Kit as a Fully Assembled and Ready to Fly Platform with 40,000mAH Battery and High Precision Commercial Flight Controller & UAV Remote for controlling 3 aircrafts (+$4,500)

3) Request Custom UAV Hardware & AI Software Consultancy, Site Visits, Site Deployment, or Operational Training - (prices per full workday for site visits willdepend on distance. Our regular UAV or AI work is billed at $200-300/HR + Additional Hardware costs, all dependent on scope of work needed)

depend on distance. Our regular UAV or AI work is billed at $200-300/HR + Additional Hardware costs, all dependent on scope of work needed)