BSS BLU-50 | 4×4 Signal Processor with BLU Link with Power Supply

Fixed I/O Devices

The BLU-50 is a half-rack width processor that offers a fixed configuration of four inputs and four outputs, configurable signal processing, logic processing and BLU link. The device can be powered with the included 12VDC power supply but can accept 12-48VDC via a terminal block connector. The BLU-50 can also be powered with PoE+ via the Ethernet port, allowing the device to be powered, configured, controlled and monitored using a single Cat 5e cable.

The analog inputs of the BLU-50 provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication.

The BLU-50 features BLU link, a low latency, fault tolerant digital audio bus of 48 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 10km (6.2 miles) using single mode fiber.

The BLU-50 is configured, controlled and monitored from HiQnet Audio Architect™ or HiQnet London Architect™ and is compatible with other members of the Soundweb London family. Its 48 channel BLU link bus represents channels 1-48 of the larger 256 channel BLU link bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices. Up to 60 BLU link compatible devices can share channels on a single bus.

As with other Soundweb London devices, 12 Control Inputs, six Logic Outputs and an RS-232 port allow the BLU-50 to be integrated with other compatible devices.

Features and further details

4 Analog Inputs (with 48v Phantom Power per Channel)
4 Analog Outputs
Configurable Signal Processing
Rich Palette of Processing and Logic Objects
48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
Clear Front Panel LED Indication
Bi-Directional Locate Functionality
12 Control Inputs and 6 Logic Outputs for GPIO Integration
Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
HiQnet Device
Configuration, Control and Monitoring from
HiQnet London Architect
12-48VDC or PoE+ Powering Options (12VDC Power Supply Included)
Rack Mount, Surface Mount and Desk Mount Installation Options
Technical Specifications

Front Panel Led Indicators:
Per Input: Signal Present, CLIP, 48V (Input only)
Other: COM, STAT, ERR, PWR
Analog Inputs: 4 electronically balanced on Phoenix Mini Combicon removable screw connectors
Mic/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps
Input Impedance: 3.5kΩ
Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain
CMRR: >45dB at 1KHz
Input Noise (E.I.N.): <-128dBu typical with 150Ω source
Phantom Power: 48V nominal, selectable per input
A/D Latency: 37/Fs [0.77ms@48k]
Analog Outputs: 4 electronically balanced on Phoenix Mini Combicon removable screw connectors
Maximum Output Level: +20dBu
Frequency Response: 20Hz-20KHz (+0.5dB/-1dB)
THD: 0.005% typical at +4 dBu, 1kHz, 0 dB input gain
Dynamic Range: 110dB A-weighted, >107dB unweighted
Crosstalk: <-100dB
Output Impedance: 120Ω
D/A Latency: 29/Fs [0.60ms@48k]
BLU link:
Connectors: 2 x RJ45 Ethernet connectors
Maximum Cable Length: 100m/300ft on Category 5e cable between devices
Max. Number of Nodes: 60
Latency: 11/Fs [0.23ms@48k]
Pass Through Latency: 4/Fs [0.08ms@48k]
Power and Dimensions:
Power Requirements: 12-48VDC
Power Adapter: 100-240VAC 50/60 Hz, 12VDC output
Power Consumption: <55VA
BTU Rating: <188 BTU/hr
Operating Temp. Range: 15 (59) to 35 (95) degrees C (degrees F)
Dims: (H(U) x W x D): 1.625” (41mm) x 8.63” (219mm) x 7.75” (197mm)
Weight: 2.82 lbs / 1.28 kg

Contact us

We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns! We'd like to be sure you are completely satisfied with your purchase.

NEW ITEMS return policy 

1. If you are not satisfied with your product, you may return it within 30-day window upon receiving the product. 

2. Returns on new items are subject to restocking fees anywhere from 10-50% at the discretion of the seller. All returns will be inspected for any missing or damaged packaging or accessories or any other devaluation of the product.

3. Return shipping costs for new items are the responsibility of the buyer 

4. Shipping charges incurred during fulfillment of the orders be deducted from the refund.

5. Items returned because a buyer found a "better price" will be subject to a partial refund.

6. All new item returns must receive an RMA number prior to the return.

7. Return items must be repackaged properly in the same care you received.


USED/OPEN BOX Items return policy 

ALL sales are final / NO RETURN 


Any Items above $1000 return policy 

1. These items purchased are eligible for return with restocking fee of not less than 50%.

2. Items must be returned as unopened, in original brand-new condition, showing no signs of wear or usage. 


CANCELLATIONS

New and used items are subject to a 5% processing fee if cancelled before delivery.