Please read the Description below for more info and important notes! If you have any questions that aren't answered there, feel free to contact us! :)

THERE ARE SEVERAL CONFIGURATIONS AVAILABLE FOR THIS SURROUND. PLEASE LEAVE A NOTE DURING CHECKOUT OR SEND A MESSAGE WITH THE OPTION THAT YOU WOULD LIKE FOR EACH SECTION (choose only 1 per section):


Top Section: 
-Climate Control, 
-3 - 52mm Gauges, 
-Blank

Bottom Section: 
-Single DIN (Read Notes in Description), 
-Double DIN (Read Notes in Description), 
-3 - 52mm Gauges (Positioned at the top of the bottom section) Blank Underneath, 
-6 - 52mm Gauges (two rows of 3), 
-Blank

If we don't receive a message/note and are unable to contact you to see which you'd like you will receive the surround shown in the main picture of the listing which has provisions for the stock climate control and a double DIN radio.

We’ve come up with a replacement for the very fragile stock Foxbody plastic radio surround!

-Engineered and manufactured in house in the USA!

-CNC laser cut from 0.063″ (1.5mm) aluminum, finished with an even brushed finish

-Ready to be painted, powder coated, wrapped, or can be left raw to match your interior/build

-Uses all factory mounting locations so there is no drilling, cutting, or modifying your car

-All necessary mounting hardware and installation instructions are included

If you have any questions please contact us!

 

Notes: 

-If you need a custom configuration that can’t be made from the above options, just write to us and we’d be happy to work with you on one that will meet your needs!

-Our radio surround will currently only fit ’90-’93 Foxbodys. We are hoping expand into other year ranges soon!

Single and Double DIN Radio Notes:

-You may need to slightly trim your dashboard (1/16″ or so total) to allow it to fit while clearing the radio mount bracket. We did not need to on our donor car, but it was very tight so if there is any variation in manufacturing tolerances from Ford (very likely) you may run into slight interference.

-As stated above, the radio is a tight fit and has a mount bracket riveted on. You will need to mark where the holes land on it by test fitting your radio into the surround/bracket, marking the hole centers, and drilling them. We do not provide any holes to fasten the radio/head unit to the aluminum bezel as there are so many various aftermarket options. All other holes needed to mount the radio bezel to the vehicle are present and utilize stock mounting holes in the dashboard.

-Dimensions for the Double DIN opening are listed in the pictures. Please confirm that your stereo will fit prior to ordering.


Thanks for looking! LRB Speed is a small husband and wife company based in Clearwater, FL. We specialize in offering high quality, affordable products, mainly for the import sports car scene! All of our products are proudly engineered, manufactured, and packaged by the two of us right here in the USA!

Landon has a Bachelor's degree in Mechanical Engineering from USF which he utilizes when designing the products that we make, so you can trust that the quality is top notch! We have a strong passion for these vehicles and want to help keep them going for years to come!

Customer satisfaction and quality products are our top priority, so if you have any questions, concerns, or new product suggestions we'd love to hear them! Thanks for supporting small US based business! :)


*All products are made to order in house by Landon and Rebecca. Please see the Delivery section prior to ordering to see our build times. We try to ship ahead of schedule when possible, but are not able to guarantee it. Thanks for understanding! 🙂 *

Policies:

Cancellations: Each part is custom made to order, so orders cannot be canceled more than 24 hours after payment is received.
Returns: Since each part is made to order, we do not accept returns.
Order Issues: If you have a problem with your order, please contact us and we will do our best to remedy it as quickly as possible! :)