This flash has a handheld grip for easy secure holding.
MOUNTING
This handheld flash can also be mounted to a tripod or light stand.
Commander Air 10s Key Features
EASY FIRMWARE UPDATES
The Air 10s has been equipped with a Micro SD card slot that allows users to easily update the device by themselves. The Micro SD card slot will be included as standard on all future strobes and commanders.
FULL CONTROL AT A DISTANCE
Now with an extended maximum range of 100 metres, this device can be used at a much greater distance than older models. TTL mode, high speed sync up to 1/8000s, rear curtain sync and other flash functionality can all be set from the Commander Air 10s. Keep complete control, even at a distance.
EXPOSURE CONTROL
In TTL mode, you can adjust and fine-tune your exposure in 1/3 EV increments, right the way down to 1/256 – great for high-sensitivity shoots.
INSTANT SET UP
With its TTL memory function, the Air 10s memorises the exposure during a TTL mode shoot and allows for a one-touch switch to manual mode. Save time during setup as the device takes the TTL exposure data, calculates the individual output, and transforms the exposure data into manual mode for you to make your final tweaks.
CROSSOVER CONTROL
With the Air 10s, you maintain complete control of all versions of your NAS strobes, whatever fit they are designed for. As long as your Commander is for the same brand as your camera, it can be used to control any version of NAS-compatible flashgun. For example, a photographer who has recently switched from Sony to Canon can use their Canon Commander Air 10s to control their NAS-ready Sony flashguns, and still retain use of all the functions including TTL.
OPEN MODE
With the new open mode, multiple Air 10s units can be paired with the same group of strobes, eliminating the need to re-pair devices. Even if you need to change cameras mid-shoot, the settings are retained as the shoot continues, allowing multiple cameras and commanders to share the same group of NAS strobes
MG10 Flash Product Description
Nissin’s award-winning*, next-generation MG10 features an external motorised zoom, allowing it to zoom from 24 to 200mm. With the diffusor, it covers a wide angle of 18mm. This powerful zoom flash has a guide number of no less than 80 at 200mm, and 47.5 at 35mm zoom range. With two 26650 Li-ion batteries, the MG10 boasts a superfast recycling time of only 1.5 seconds (3.5 seconds when using AA batteries), and is also equipped with a 8W LED modelling light for studio shoots, as well as being fully compatible with Canon, Nikon, Sony, Micro Four Thirds and Leica systems. It also features a micro SD card slot, allowing users to easily update the firmware themselves when needed.
The flash is designed with an ergonomic hand grip for handheld use, as well as a standard adapter screw underneath for mounting to a tripod, light stand or other accessories. It is also supplied with an adaptive quick release ‘L’ bracket that can be mounted on the left or right of the camera for maximum usability. The built-in shutter release button gives even more flexibility when working off camera.
Commander Air 10s Product Description
The Air 10s is an advanced multi mode flash commander that can be used to quickly and seamlessly control a large group of flashes, whether you’re in a dark studio or a bright outdoor setting. Available for Fujifilm, Micro Four Thirds, Sony, Canon and Nikon cameras, the Air 10s uses the same clear, easy-to use dial layout and colour LCD display that has been so popular in the rest of the Nissin Air System.
Designed to work with the NAS-ready i60A and Di700A, as well as any flashguns with strobe capability connected to a Receiver Air R, this innovative wireless trigger has a number of advanced features as listed above.
MG10 Flash Specs
Guide no.
GN80 at 200mm GN47.5 at 35mm.
Compatible commanders
Air 10s, Air 1.
Compatible receivers
Air R
Zoom coverage
24-200mm motorised outer zoom, 18mm with diffusor.
Power source (not included)
2 x 26650 Li-ion batteries (4000mAh or higher) or 8 AA rechargeable batteries.
Recycling time
1.5-3.5 seconds (depending on power).
Number of flashes
(approx.) 200-500 (depending on power).
Flash duration
1/10000~1/167 sec.
Colour temperature
5600K.
Control and communication
Nissin Air System (Air 10s for full control).
Setting
Channel setting, group setting, open mode.
Wireless mode
2.4 GHz with Nissin NAS system.
EV Compensation
None / set by commander.
Bounce position
-7~90 deg vertical, +/- 180 deg horizontal
Manual mode power ratio
1/256~1/1 with 1/3 steps
Modes
TTL, M, HSS, OPEN
LED modelling
8W LED, approx. 4 hours operation
External power pack socket
Yes
Shutter release
Cable to camera or by NAS
Tripod mount
Standard 1/4” screw thread
Bracket mount
Left or right mountable
Flash tube life
100,000 full power flashes
Accessories
AA battery and Li-ion battery magazines, ball head, filter holder, wide-angle diffusor
Dimensions
210 x 145 x 80mm
Weights
975g without batteries
Commander Air 10s Specs
Type
For Nikon Systems
Compatible Strobe
i60A, Di700A
Compatible Receiver
Air R
Wireless system
Radio category
Radio specifications
2.4GHz ISM band (Obtaining technical standards conformity certification)
Communication
Pairing is needed before the use of Air10s
Channel
8 channels
Flash Groups
A, B, C, D & Ȧ, Ḃ, Ċ, Ḋ (total 8 Groups) * (Group control and a specific group can be chosen to stop transmitting)
Power Source
2 x AAA batteries
Continuous shooting speed
10 shots/sec
Number of flashes per charge
Approx. 3,000 flashes
Transmission distance
Max. 100m (Depending on the environment)
Mode
[TTL] i-TTL (Nikon) / E-TTL II / E-TTL (Canon) [manual] / ADI / PTTL (Sony) / TTL (Fujifilm) / TTL (Micro Four Thirds / Four Thirds)
