These kits make it easy to order premium components for wiring your Gibson® SG®. CTS push-pull pots split the coils of humbuckers for single-coil operation. For humbucking pickups with series link access (3 wire, 5 wire, etc). Complete with wiring diagram, this kit features trusted components used for decades in Gibson® and other iconic American instruments, such as Switchcraft toggle switch and jack, CTS potentiometers, Orange Drop capacitors and cloth-covered push-back wire. Be sure your control knobs will fit: CTS pots in this kit have fine-knurled (24-spline) split shafts. Coarse-knurled knobs for imported Alpha pots won't fit. Premium Wiring Kit for Gibson SG includes: 1/4" Switchcraft long-thread output jack (1) 500K-ohm CTS control pots (4 total: 2 regular, 2 push-pull) .022uF Orange Drop capacitors (2) Switchcraft 3-way right-angle switch (1) Amber switch knob (1) Non-shielded cloth-insulated push-back circuit wire: 22 AWG, white, 12" long Non-shielded cloth-insulated push-back circuit wire: 22 AWG, black, 24" long Shielded braided push-back circuit wire: 22 AWG, 12" long Wiring diagram CTS control pot specifications: – Shaft diameter: 0.235" (5.95mm) split shaft, fine knurling – Thread: 3/8" x 32 – Thread height: 3/8" (9.52mm) – Required mounting hole diameter: 3/8" (9.52mm) – Required cavity depth: 1-3/16" (30.16mm) Switchcraft 3-way right-angle switch specifications: – Switch length: 2" (50.80mm) – Body cavity depth required: 13/16" (20.64mm) – Mounting hole diameter: 1/2" (12.70mm) – Thread height: 3/16" (4.76mm) – NOTE: Requires at least 1-3/4" (44.45mm) from the center of the mounting hole to the edge of the control cavity for wiring clearance