Up for sale is a used (4)-Relay Panel / Block
with new 12V 100-Amp Relays.

This item came out of a commercial semi truck.
The relay sockets are mounted on a slightly angled aluminum bracket.

Wiring:

• (2) sockets are wired with 14 awg wire for SPDT (single-pole double-throw) functionality,
• (1) socket is wired with 12 awg wire for SPDT (single-pole double-throw) functionality,
• (1) socket is wired with 10 awg wire for SPST (single-pole single-throw) functionality (meaning relay terminal 87A is not wired).
• These wire ratings are for the load terminals. The relay coil terminals are wired with 16 or 18 awg wire.
• Most wires are approx. 4" long, some are a bit shorter.
• Wire colors may vary from the pictures.

Relays:

• The relays are brand new 100-Amp rated units.
• They have double contacts to allow for higher circuit loads, as well as an integrated LED indicating the relay is energized.

Measurements:

• Length is approx. 5-1/2"
• Height is approx. 3" (not accounting for the wires coming out at the bottom)
• Depth (from the mounting surface) is about 2-1/4".

Please see photos.
Questions welcome. Thanks for looking.