Bypass plug for the Spyball AM/8510 motorcycle alarm. Can be used as a diagnostic aid to determine where a fault lies, proving whether the fault is with the bike or the alarm. No need
to back trace & rewire the bike. Simply locate the alarm unit remove the cable cover & unplug the connector & insert into the the bypass plug & away you go. The bike will now
start and run as it did when it left the factory. Supplied with easy to follow instructions. Will also fit the AM/8050 & AM/8520 models
For the Spyball 6527 or Delta 6527 alarm bypass plug Click Here
Please
note for bikes which have been standing a long time may not start easily or at all which is usually due to bad fuel, gummed up carbs/injectors, dead
battery, rodent eaten wiring etc etc. This plug will allow the bike to
function as long as the bike is function-able. If the bikes starts & runs but cuts out when a gear is selected means the fault is with the bike, this bypass plug will not fix this problem.
Money back guarantee, should you not be 100% satisfied simply send the plug back for a full refund
Telephone & Email Technical Support should you have problems
Free 48 hour Tracked delivery same
day postage if ordered before 4.30pm, Upgrade to 24 hour delivery if needed urgently (For the UK only)