Product Overview:

The Auger Conveyor is suitable for transferring a batch of particulate material from the ground level to packaging or filling machines or various application occasions, and the product fed by the conveyor is controlled to retain the product level in the product hopper. Application: dry pellet pet food, dry particulate, etc. The machine is suitable for the food industry and other industries. The screw drive feeding machine forms a complete set of auxiliary machinery required for plastic processing machinery, and is a piece of indispensable auxiliary equipment in the feeding process of blow molding machines. Particulate or granular plastic raw materials can be transferred automatically and directly to the inside of the hopper. The adjusting and mixing machine is a piece of special equipment; the materials making contact with raw materials are stainless steel, ensuring raw material integrity during conveyance, preventing contamination by foreign matter, and achieving automatic sealing during the production process.

Product parameter:

Voltage: 220V
Power: 750W(1HP)
Height of discharge outlet from ground: 66.93"(1.7m)
Capacity(Change according to material density): 441-661lb/h(200-300kg/h)
Inlet size: 27.36"*27.36"(69.5cm*69.5cm)
Phase number: 1
Machine material: 201 stainless steel
Discharge outlet diameter: 3.15"(8cm)
Product size: 75.59"*29.53"*83.07"(192*75*211cm)

Note: if you have other requirements, you can contact us to customize the machine

Product Features & Advantages:

- Installation is convenient and portable, for example, the same material are used by more material mixing machines, material mixing and feeding are conducted by one machine at the same time, more troubles from artificial processing are avoided, the feeder is more efficient, feeding can be safer and saves more time, and the feeder reduces the labor intensity of the workers.
- the design is reasonable, the operation and maintenance are convenient, compared with the vacuum feeding machine, it can avoid the trouble of cleaning the filter regularly.
- The machine can be used in a wide range of materials, can be used for mixing the Particulate granules of Particulate materials and crushed materials. It can also be used for transporting Particulate granules in the process of pharmaceutical chemical production.
- Less energy consumption, only about one third of the stainless steel used in traditional vacuum feeding machine, with better durability.
- Lightweight stainless steel material, lighter weight, more convenient to move and handle the machine.

Method of wire connection

Warning：Before use, please follow the instructions in the manual to standardize the wiring, and do not arbitrarily connect without permission, otherwise the equipment will be damaged! ! !

I.The overall picture of the machine's three wires is shown below.
II.The spring feeding electrical wire is shown in the following figure.
III.The wire ② and the wire ③ are processed with a utility knife or pliers to peel off the outside of rubber layers, and each of the wire ② and the wire ③ has four exposed lines with different colors. Connect two lines with the same color (For example, the blue lines are connected with the blue lines, and the yellow lines are connected with the yellow lines), and then wrap the joints properly with insulation tape to prevent leakage.
IV.Connect the line A in the wire ① to the live wire, connect the line B to the naught wire, As shown in the figure below. (Note:The brown line is the live wire, the blue line is the naught wire, do not connect these two lines together!!)
In simple terms, the wire ② is connected with the wire ③ according to the corresponding colors of the lines, and then the two lines of the wire ① are connected to the live wire and the naught wire respectively. If you have other details, please contact us！

Item Included(056005)