|
Handpiece Oiling Machine
Features:
Economical, efficient and time-saving.
It is able to ensure the cleaning and refueling of dental handpieces.
Three handpieces(two high speed and one speed)can be maintained simultaneously.
Various brands of high-speed and low-speed handpieces are applicable
Rotating gear can efficiently oil and clean handpieces from different angles
The digital regulation time function can control the oiling time accurately.The air button with special design can remove the redundant oil after oiling and cleaning.
Using sealed sliding door to minimize the diffusion of oil mist, Keep working conditions clean.
Smart working mode avoid setting the oiling time every time.
Parameters:
Voltage Rating: AC110V
Air Pressure: 4kg/cm² - 8kg/cm²
Rated power: 40W
Can Volume: 300ml
Working temperature: 5℃ - 40℃
Size:300×230×360mm
Packing list:
1×Main unit
1×Blow-off pipe
1×Product manual
14L
Description:
Chamber capacity:Ø25×D28CM (Ø9.84×D11.02inch)
Inside capacity:14 Liter
Material:Stainless steel #304
Outside Size :46.5*35*36 CM
Packing Size :51*39*40 CM
G.W:15KGS
Sterilizer temperature:121℃
Sterilize pressure:0.12Mpa
Sterilize time:25Min
Power:900W
AC110V/8A
AC220V/4A
Auto supply water system: Manual give the water
Safety valve: automatic discharge in excess of standard value
Temp and Press display:Pressure gauge
Disinfection principle:Uses the vapor power emissions cold air / 2 times
Operation Steps:
1.Plug in the power cord
2.Shut exhaust needle valve in the Close (clockwise)°
3.Adding about 800 ml of distilled water. Close the door cover, tight the rotate handle
4. Start the timer knob to 121 ℃ position. Sterilization is working
5.Sterilization is complete, please be sure to open the exhaust needle valve firstly (inverse clock direction)
6.Wait for the pressure gauge pointer to zero, opened the door cover
Caution:
Every time sterilization, must add about 800 ml of distilled water
Use a separate socket (confirm the socket of the output voltage)
Pressure gauge pointer in the red areas, please be sure to first Open the exhaust steam of the needle valve
Packing:
main unit 1pc
Standard accessories:
Plate 3pcs ( Size:201*136*21 mm)
Shelf 1pc
Take Plate tool 1pc steam exhaust pipe 1pc(1 meter length)
18L
Description: Chamber capacity:Ø25×D35CM (Ø9.84×D13.78inch) Inside capacity:18 Liter Material:Stainless steel #304 Outside Size(L*W*H) :58*39*36 CM Packing Size(L*W*H) :64*44*36.5CM Sterilizer temperature/pressure:121℃/0.12Mpa; 134℃/0.22Mpa Sterilize time:25Min/6Min Power:1000W AC110V/8A AC220V/4A SAFETY : Heating-over protection ; safety valve Safety equipment: 1.Pressure adjustment: adjust the inter pressure, if over standard value automatic vent 2.Avoild overheat protect device: when inter temperature overheat, power break electric current automatically. Temp and Press display :Led several windows Disinfection principle:Uses the vapor power emissions cold air / 2 times
Caution: 1.Before each use, distilled water is better 2.Do not use any corrosive or chemical water as the disinfection 3.Do not share the same electricoutllet with other electrical apparetus 4.Please pay attention to correct voltage and frequency 5.Connect steam exhaust pipe with the steam vent,before operation
Packing: main unit 1pc Standard accessories: Tray Rack 1pc Tray 3pcs Tray removal tong 1pc Draining Tube 1pc Intake pipe 1pc Operation manual 1pc Power cord 1pc Filter core 2pcs
18L with Drying Function
Description: Voltage:110V, 50Hz Heater Power: 1100W Tank capacity: 18L Inside dimensions: Φ250 x D350mm Sterilize temperature: 122℃ & 134℃ Sterilize pressure: 0.12Mpa & 0.23Mpa Sterilize time: 25min & 6min Drying time: 40min Tank Material: Stainless steel #304 Machine size (L*W*H): 60 * 39 * 36cm Packing size (L*W*H): 61 * 53 * 40cm N.W.: 33KG G.W.: 35KG Standard accessories: (Plate * 3PCS; Shelf * 1PCS; Plate Taking tool * 1PC) Application: For dental, surgery, beauty salon, medical care, laboratory, and so on.
Caution: 1.After the completion of disinfection,please to wait for 10 minutes. Pressure Gauge in red area. Do not rotate handle, open the steam discharge valve firstly. 2.Before each use,must supply water 800ml of distilled water. 3.Please close steam discharge valve before the disinfection. 4.Do not use any corrosive or chemical water as the disinfection. 5.Do not share the same electricoutllet with other electrical apparetus. 6.Please pay attention to correct voltage and frequency. 7.Connect steam exhaust pipe with the steam vent,before operation
FDA Statement: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name:allguest City,State:SHENZHEN,China Telephone number:0755-58772369
K181993
Device Classification Name Sterilizer, Steam
510(K) Number K181993
Device Name STURDY Autoclave Super Microm (Models SA-260MA And SA-260MA-R)
Regulation Number 880.688
Classification Product Code FLE
Date Received 7/26/2018
Decision Date 11/1/2019
Device Class 2
|