Copper State Models CSM72001 1/72 Italian Armoured Car 1ZM Model Kit
--This is a guide to the 1/72 Italian 1ZM armored car with a completely new mold from the Copper State model.
--This is a four-wheeled armored car developed in Italy during World War I. It was used in battles with the Austro-Hungarian Imperial Army at the end of World War I, and was also used in the Spanish Civil War after World War II, and part of it was the first. It was also used in World War II.
――The 1ZM, which was developed based on the IZ truck, had an advanced design, and was equipped with two machine guns on the rotating turret and one machine gun on the rear of the car body, and had powerful firepower at that time.
――In addition, due to the lessons learned during World War I, a rail for cutting wires was installed in the upper part of the front of the car body.
――About 120 1ZMs were produced in 1918.
--This injection plastic kit comes with two types of machine guns and a variety of cult graph markings (1918-1930s).
――When completed, the total length will be about 79 mm.
[Actual vehicle specifications]
--Crew: 6 people
--Dimensions: Overall length 5.70m / Overall width 1.94m / Overall height 2.40m
--Engine: 1 35HP 4940cc 4-cylinder engine
--Weight: 4.2t
--Maximum speed: 60km
--Cruising range: 300km
--This is a four-wheeled armored car developed in Italy during World War I. It was used in battles with the Austro-Hungarian Imperial Army at the end of World War I, and was also used in the Spanish Civil War after World War II, and part of it was the first. It was also used in World War II.
――The 1ZM, which was developed based on the IZ truck, had an advanced design, and was equipped with two machine guns on the rotating turret and one machine gun on the rear of the car body, and had powerful firepower at that time.
――In addition, due to the lessons learned during World War I, a rail for cutting wires was installed in the upper part of the front of the car body.
――About 120 1ZMs were produced in 1918.
--This injection plastic kit comes with two types of machine guns and a variety of cult graph markings (1918-1930s).
――When completed, the total length will be about 79 mm.
[Actual vehicle specifications]
--Crew: 6 people
--Dimensions: Overall length 5.70m / Overall width 1.94m / Overall height 2.40m
--Engine: 1 35HP 4940cc 4-cylinder engine
--Weight: 4.2t
--Maximum speed: 60km
--Cruising range: 300km
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 22 x 16 x 3 cm / 123g
warning
Due to the product is a professional assembled model that requires glue and painting after completion, However, paint and glue is flammable and explosive, please store it in a safe place
Copper State Models CSM72001 1/72 Italian Armoured Car 1ZM Model Kit
--This is a guide to the 1/72 Italian 1ZM armored car with a completely new mold from the Copper State model.
--This is a four-wheeled armored car developed in Italy during World War I. It was used in battles with the Austro-Hungarian Imperial Army at the end of World War I, and was also used in the Spanish Civil War after World War II, and part of it was the first. It was also used in World War II.
――The 1ZM, which was developed based on the IZ truck, had an advanced design, and was equipped with two machine guns on the rotating turret and one machine gun on the rear of the car body, and had powerful firepower at that time.
――In addition, due to the lessons learned during World War I, a rail for cutting wires was installed in the upper part of the front of the car body.
――About 120 1ZMs were produced in 1918.
--This injection plastic kit comes with two types of machine guns and a variety of cult graph markings (1918-1930s).
――When completed, the total length will be about 79 mm.
[Actual vehicle specifications]
--Crew: 6 people
--Dimensions: Overall length 5.70m / Overall width 1.94m / Overall height 2.40m
--Engine: 1 35HP 4940cc 4-cylinder engine
--Weight: 4.2t
--Maximum speed: 60km
--Cruising range: 300km
--This is a four-wheeled armored car developed in Italy during World War I. It was used in battles with the Austro-Hungarian Imperial Army at the end of World War I, and was also used in the Spanish Civil War after World War II, and part of it was the first. It was also used in World War II.
――The 1ZM, which was developed based on the IZ truck, had an advanced design, and was equipped with two machine guns on the rotating turret and one machine gun on the rear of the car body, and had powerful firepower at that time.
――In addition, due to the lessons learned during World War I, a rail for cutting wires was installed in the upper part of the front of the car body.
――About 120 1ZMs were produced in 1918.
--This injection plastic kit comes with two types of machine guns and a variety of cult graph markings (1918-1930s).
――When completed, the total length will be about 79 mm.
[Actual vehicle specifications]
--Crew: 6 people
--Dimensions: Overall length 5.70m / Overall width 1.94m / Overall height 2.40m
--Engine: 1 35HP 4940cc 4-cylinder engine
--Weight: 4.2t
--Maximum speed: 60km
--Cruising range: 300km
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 22 x 16 x 3 cm / 123g
On Dec 4, 2025 at 06:22:56 PST, seller added the following information: