Ground Fault Circuit Interrupter (GFCI) receptacle is designed to recognize a ground fault in your wiring and immediately break the flow of electricity, thus protecting you from electrical shock.
LED Indicator will always be on, no matter it trips or works properly, indicating the on-going protection. Once it turns off, it means power source (circuit breaker) breaks off or GFI is malfunctioning. Contact customer service for a replacement.
Easy Installation with back or side wiring. Standard wall plates, screws and installation instructions included. 20A/125V ETL certified, 3-year limited warranty.
What you will get ?
10 x White GFCI Outlet
10 x Standard-Size Screwless Wall Plate
20 x Receptacle Mounting Screw
20 x Color-Matched Outlet Cover Screws
10 x Installation Guide
| Specification |
What is GFCI ? |
| Condition : 100% Brand New |
GFCI stands for Ground Fault Circuit Interrupter. It has a safety feature that will trip and shut off power within milliseconds of detecting a ground fault. This helps to protect against electrical shock. |
| Color : White |
| Electrical rating : 125V/20A/60Hz/2500W
|
|
Certification : ETL
|
What you will get ? |
|
Warranty: 2 Year
|
10 x White GFCI Outlet
10 x Standard-Size Screwless Wall Plate
20 x Receptacle Mounting Screw
20 x Color-Matched Outlet Cover Screws
10 x Installation Guide
|
| Tamper Resistant : Non |
| Country of delivery : US |
LED Indicator
: Green LED Light ON when GFCI is installed correctly and is providing power properly.
: Red LED light ON when GFCI is malfunction.
: No LED light when GFCI trips or mis-wired.
TEST Button & RESET Button
When the TEST button is pressed, the flow of electricity should be stopped, and the RESET button would be pop-out. To restore power, press the RESET button.
Safe ETL Certification
It offers electrical shock through advanced GFCI design as well as the fireproof poly-carbonate housing helps reduce fire risk.
Warning Tips: The GFCI socket needs to be tested whether it can work normally before using. The Green Light indicates that the wiring is correct.1.plug the night light into the outlet, and the light should be on. 2.Press the "Test" button, the” Reset“ button will pop up and the night light will turn off. If you press the test button and the reset button pops up but the night light still on, it indicates that the leakage protection is faulty. Please replace the socket.
On Mar-03-22 at 17:38:41 PST, seller added the following information:
On Jul 9, 2022 at 17:15:13 PDT, seller added the following information:
