Praxus Park Flyer R/C Airplane Fiberglass Fuselage Wood & Film covered Wings
Item NO.: PR001
Wingspan: 864mm /34in
Wing Area: 138 square.inches
Overall Length: 508mm /20in
Flying Weight: 5.5-8 ounces
Wing Loading: 5.75-8.5 ounces per suare foot

Features:
Lightweight fiberglass, balsawood, and carbon fiber construction
Factory painted fiberglass fuselage
Factory covered with ultra-lightweight clear plastic
Includes optional landing gear
Complete hardware including carbon fiber pushrods and wing struts.

Kit Contents
1. Assembled Wing Halves
2. Fuselage Pod and Factory installed boom
3. Horizontal stabilizer & elevator
4. Vertical stabilizer & rudder
5. Landing Gear & Tail Ski Assembly
6. Carbon Wing Struts (245mm long) x2pcs
7. Carbon Pushrods (320mm long) x2pcs
8. Wire Z-Bend Ends x2pcs
9. Wire L-Bend Ends x2pcs
10. Carbon Strut Pin (stepped) x2pcs
11. Carbon Control Horns x2pcs
12. Rod End Keepers x4pcs
13. Wing L.E. Mounting Rod
14. Wood Wing Mounting Plate
15. Wood Wing Mounting Screw
16. Heat Shrink Pieces x6pcs

Item Needed (Not included)
1x Radio System: 3-Channels are needed (Rudder, Elevator, Throttle)
The receiver should be a lightweight type (<5 ounces /14grams)
The servos should be lightweight (<3 ounces /9 grams)
1x ESC (motor controller): The ESC will need to be 5-15A according to the motor system and battery you will use
1x Motor 180 brushed (included)
Battery: This should be chosen to match the motor /prop size. If useing our 180 motor, a 5 cells AAA size NiCD or NiMH battery pack will be needed