ThinkCar ThinkScan Plus S7 System Diagnostic Scanner For ABS SRS ECM TCM BCM IC AC
Chassis System(BCM) Diagnostic: Carry out fault diagnosis on body/frame/transmission system/steering system/brake system/driving system
ABS System Diagnostic: Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.
Engine System Diagnostic: You can diagnose the engine system via ecu obd2 port, support all 10 OBDII test modes, such as live data, O2 sensor test, component test and more;read and clear the engine error codes, find out the exactly problem, repair it, and turn off the MIL engine light.
Auto Transmission System: AT is a set of transmission used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine. ThinkScan Plus S7 obd2 scanner can read/clear codes and view live data retrieve the error information from AT.
AC System Diagnostic
IC System Diagnostic
SRS System Diagnostic: Safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.

What Difference Between Plus S2/S4/S7?
★S2:Support ABS,SRS,ECM 3 Systems Lifetime Free;2 Optional Resets Services Lifetime Free(All Resets are 28 Pcs)
★S4:Support ABS,SRS,ECM,TCM,BCM 5 Systems Lifetime Free;3 Optional Resets Services Lifetime Free(All Resets are 28 Pcs)
★S7:Support ABS,SRS,ECM,TCM,BCM,AC,IC 7 Systems Lifetime Free;5 Optional Resets Services Lifetime Free(All Resets are 28 Pcs)

Professional Diagnostic Scanner for Car that Fits Your Needs-28 Maintenance Service
You can choose 5 for lifetime-free from following 28 Rest Function Options.
If you need more special functions, you need to pay an additional 29.95 dollars /year /reset.
1.Oil Lamp Reset Service
To reset your oil service after changing the oil or simply resetting your vehicle inspection warning light(please make sure your vehicle is in good condition).The scanner helps you to reset the service lamps on the instrument cluster.
2.EPB Electronic Park Brake Reset
It is a technology that realizes parking brakes by electronic control.This OBD2 scanner is an essential tool required to release the rear electric parking brake unit when replacing rear pads or discs so that the caliper piston can be moved back.It can also clear codes and turn off the EPB light when it’s done.
3.BAT battery service
Evaluate the battery charge state,monitor the close-circuit current,register the battery replacement,and activate the rest state of the vehicle.Not all vehicles need to do the battery reset after changing batteries.
4.DPF Diesel Particulate Filter Reset
it is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode(such us high temperature heating conbustion,fuel additive or catalyst reduce PM ignition conbustion)to stabilize the filter perfornance
DPF regeneration may be performed in the following cases:
a)The exhaust back pressure sensor is replaced
b)The PM trap is removed or replaced
c)The fuel additive nozzle is removed or replaced
d)The cataytic oxidizer is removed or replaced
e)The DPF regeneration MIL is on and maintenance is performed
f)The DPF regeneration control module is replaced
5.SAS Steering Angel Sensor Reset
To reset the steering angle,first find the relative zero point position for the car to drive in straight line.Taking this position as reference,the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor,replacing steering mechanical parts(such as steering gearbox,steering column,end tie rod,steering knuckle),performing four-wheel alignment,or recovering car body,you must reset the steering angle.
6.TPMS Tire Pressure Monitoring System Reset
This function allows you to quickly look up the tire sensor IDs from the vehicle’s ECU,as well as to perform TPMS replacement and sensor test.
a)After the tire pressure MIL turns on and maintenance is performed,the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL warning light.
b)Tire pressure resetting must be performed after maintenance performed in the following situations:
tire pressure is too low,tire leaks,tire pressure monitoring device is replaced or installed,tire is replaced,tire pressure sensor is damaged,or tire is replaced for the car with tire pressure monitoring function..
7.IMMO Key Programming
The unique car key programming and read pin code function,it is mainly used to disable the lost vehicle keys and program a new replacement key fob.
8.ABS Bleeding
When the ABS contain air,the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.If the ABS computer,ABS pump,brake master cylinder,brake cylinder,brake line,or brake fluid is replaced,the ABS bleeding function must be performed.
9.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
10.Suspension Reset
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.
11.Gearbox(Transmission )Reset
Procedure Reset Transmission Adaptive Learning DIY.Start the car and drive.Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern.After you follow this programming method of the TCU/ECU drive the car.
12.AFS Headlamp Reset
'AFS' means Adaptive Front lighting System(at night with the Bi-Xenon headlights) it swivels either side,pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.
13.Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled.Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.
14.Throttle Adaptation
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine.In an electronically fuel injected car,a throttle position sensor and air flow sensor communicate with the computer,which supplies the corresponding amount of fuel needed at the injectors.It must need re-learning throttle sensor position after clearing or repair.
15.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
16.EGR Reset
This function can be used for EGR valve (exhaust gas recycled) cleaning or self-learning after replacement.
17.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
18.Adblue Reset(Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up,urea reset operation is required.
19.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.When the vehicle collides and the airbag deploys,the corresponding fault code of the colision data appears,the airbag indicator lights up,and the fault code can't be cleared.Since the data inside the airbag computor is disposable,it is required that all new accessories must be ewplaced,but after performing this function,the data of the airbag computer can be recovered and the fault code can be cleared,the airbag light will go out,and the airbag computer can continue to use.
20.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
21.AT Learning
This function can complete the gearbox self-learning to improve gear shifting quality.When the gearbox is disassembled or repaired (after some of the car battery is powered off),it will lead to shift delay or impact problem. In this case,this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift
22.Language Change
This function is used to change the system language of the vehicle central control panel.
23.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust.lf the Nox fault is re-initialized and the Nox catalytic converter is replaced,it is necessary to reset the catalytic converter learned value stored in the engine Ecu.
24.Cluster Reset
a)Cluster reset is to copy,write,or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable,so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure,it is necessary to do cluster reset after maintenance.
25.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).
26.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
27.Transport Mode
ln order to reduce power consumption,the following functions may be disabled,including limiting the vehicle speed,not waking up the door opening network,and disabling the remote control key,etc.At this time,the transport mode needs to be deactivated to restore the vehicle to normal.
28.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory,and recover the automatic ascending and descending function of power window.

Support 93+ Worldwide Vehicle Coverage:
1.American Car list:
Need standard obd2 and release year from 1996-now
Chrysler,Ford,GM,Jeep,Lincoln,Buick,Cadillac,Chevrolet,Dodge,HM,ect...
2.European car list:
Need standard obd2 and release year from 2000-now
Mercedes Benz,Smart,Sprinter,BMW,Volkswagen,Skoda,Audi,Opel,Lamborghini,Porsche,Maybach,Ford,Land Rover, Jaguar,Aston Martin,Bentley,Rolls-Royce,Rover,Mini,Vauxhall,DR,Ferrari,Fiat,Abarth,Lancia,Alfa Romeo,Maserati,Bugatti,Peugeot,Citroen,Renault,Saab,Volvo,GM,GMSA,Dacia,Seat,ect ...
3.Japanese/Korean car list:
Need standard obd2 and release year from 2008-now
Honda,Acura,Toyota,Scion,Lexus,Mazda,Nissan,Infiniti,Isuzu,Daihatsu,Suzuki,Mitsubishi,Subaru,Samsung,Daewoo,Hyundai,Kia,ect...
Supported 10 language
Russian,English,French,German,Italian,Spanish,Portuguese,Japanese,Polish,Turkish

Characteristic Function:
1.Scan QR Code to Share&Print+AUTO-VIN:
Unlike most OBDII products on the market,ThinkScan Plus S7 can scan the QR code and share it where you want to share and print it after obtaining the diagnostic report.You can also take out the SD card and export diagnostic report;Convenient and fast,keeping up with the trend of the times.And you can also Auto-VIN your vehicles at anytime,Automotive VIN identification help you to read and store your car’s VIN number by one click conveniently and effectively,no need you to input the VIN one by one to save your time.manual diagnosis is also available.
2.ScreenShot+Screen Recorder+WIFI Update:
We also have two excellent advantages,that is,when you enable the screenshot and screen recording functions in the settings,you can start to take screenshots and screen recordings,they will finally be saved in "Photo album" and "Screen recorder" Under the " Settings".Besides,you can update software free lifetime.
3.Dashboard Display+Auto-Test Battery Voltage:
After the car is ignited,once connected to the car DLC,the main interface of ThinkScan Plus S7 will have a small dashboard indicator to indicate that the connection is successful;and once connected,the OBDII Scanner will automatically diagnose the battery voltage
4.Live Data On Graph:
2-in-1 live data from car code reader can be show in graph to make the data in your car system based on visualization,which helping you to analyze the abnormal parameter and help your problem more easy.

Full OBD2 Functions:
★Read Codes:Read extensive current,pending and permanent codes in OBD system quickly
★Clean Codes:Clear detected fault codes and turn off the Check Engine Light efficiently
★Live Date:View graphical live data of vehicle's computer module(s) for easy analyses
★Freeze Frame:View the vehicle's operating parameters at the moment a DTC is detected
★I/M readiness:Read I/M readiness status to have a vehicle inspected for state emissions compliance
★O2 sensor test:Perform O2 sensor test to check fuel efficiency and vehicle emissions
★On-Borad Monitor Test:Read the results of on-board diagnostic monitoring tests for specific components/systems
★Car Information Display:Retrieve the vehicle information of VIN,CINs,and CVNs completely
★EVAP Test:Perform the component Test by allowing initiating a leak test for the vehicle's EVAP system

Product Parameters:
Display Screen:5-Inch/TFT LCD(IPS)
Connection:Wi-Fi/Bluetooth
Working Temperature:32℉~122℉
Storage Temperature:-4℉~144℉