Hommix High Quality 100GPD Reverse Osmosis (RO) Membrane (TW30-1812-100)

Proven, reliable, high-performance water purification Traditional filtration systems rely on a screen or filter (such as a carbon filter) to remove particles and improve water quality. Reverse Osmosis (RO) however is a pressure-driven separation process where the water travels through the semipermeable membrane, pure water and waste water is separated. The Hommix TW30-1812-100 is a standard size (12" x 1.8") RO membrane designed to be used with residential RO systems able to fit standard housings with a 100GPD water purification capacity. The Hommix 100GPD RO membrane is made using a thin film composite (TFC), which is an RO membrane composed of and manufactured as three layers bonded together. The two base layers of the asymmetric design have a thin skin (3rd) layer of either polyamide or charged polysulfone deposited on the surface. Since this membrane is the standard size of 1812, it can be replaced with existing 50GPD, 75GPD and 80GPD membranes for tanks to fill up faster, especially with higher pressure water. Quality Assurance 100% Inspection before shipment Full automatic inspection and test On-line quality control system Features Features Dry type Membrane sheet Membrane sheet from top-tier manufacturer FDA certified thin film composite membranes NSF performance test passed NSF 100% Inspection Complete production with line inspection and tests in the suppliers factory, quality control and statistical process control system. The membranes are tested and certified by NSF International against NSF/ANSI Standard 58. These elements have been tested for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Fluoride, Lead, Radium 226/228, Selenium, Turbidity, and TDS. Operating Limits – Membrane Type Polyamide Thin-Film Composite – Max. Operating Temperature 113℉ (45℃) – Max. Operating Pressure 125psi (8.6bar) – Max. Feed Flow Rate 2.0 gpm (7.6lpm) – pH Range, Continuous Operation 3.0 ~ 10 – Max. Feed Silt Density Index ＜ 5 – Free Chlorine Tolerance ＜ 0.1ppm Model name Permeate FlowRate (GPD) Applied PressurePsig (bar) Stabilized SaltRejection (%) Minimum SaltRejection (%) Remarks TW30-1812-100 100 80 (5.5) 98 96 Dry type elements TW30-1812-150 150 80 (5.5) 98 96 Dry type elements Permeate flow rate and salt rejection based on the following test conditions : 250ppm (NaCl) softened tap water, 77℉(25℃), 15% recovery, pH 7.5 and the specified applied pressure. Permeate flows for individual elements may vary ±20%. For the purpose of improvement, specifications may be updated periodically. The membranes are tested and certified by NSF International against NSF/ANSI Standard 58.

Hommix High Quality 100GPD Reverse Osmosis (RO) Membrane (TW30-1812-100)

Proven, reliable, high-performance water purification

Traditional filtration systems rely on a screen or filter (such as a carbon filter) to remove particles and improve water quality. Reverse Osmosis (RO) however is a pressure-driven separation process where the water travels through the semipermeable membrane, pure water and waste water is separated.

The Hommix TW30-1812-100 is a standard size (12" x 1.8") RO membrane designed to be uséd with residential RO systems able to fit standard housings with a 100GPD water purification capacity.

The Hommix 100GPD RO membrane is made using a thin film composite (TFC), which is an RO membrane composed of and manufactured as three layers bonded together. The two base layers of the asymmetric design have a thin skin (3rd) layer of either polyamide or charged polysulfone deposited on the surface.

Since this membrane is the standard size of 1812, it can be replaced with existing 50GPD, 75GPD and 80GPD membranes for tanks to fill up faster, especially with higher pressure water.

Quality Assurance

100% Inspection before shipment
Full automatic inspection and test
On-line quality control system Features

Features

Dry type Membrane sheet
Membrane sheet from top-tier manufacturer
FDA certified thin film composite membranes
NSF performance test passed

NSF

100% Inspection Complete production with line inspection and tests in the suppliers factory, quality control and statistical process control system.

The membranes are tested and certified by NSF International against NSF/ANSI Standard 58. These elements have been tested for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Fluoride, Lead, Radium 226/228, Selenium, Turbidity, and TDS.

Operating Limits

– Membrane Type	Polyamide Thin-Film Composite
– Max. Operating Temperature	113℉ (45℃)
– Max. Operating Pressure	125psi (8.6bar)
– Max. Feed Flow Rate	2.0 gpm (7.6lpm)
– pH Range, Continuous Operation	3.0 ~ 10
– Max. Feed Silt Density Index	＜ 5
– Free Chlorine Tolerance	＜ 0.1ppm

Model name	Permeate Flow Rate (GPD)	Applied Pressure Psig (bar)	Stabilized Salt Rejection (%)	Minimum Salt Rejection (%)	Remarks
TW30-1812-100	100	80 (5.5)	98	96	Dry type elements
TW30-1812-150	150	80 (5.5)	98	96	Dry type elements

Permeate flow rate and salt rejection based on the following test conditions : 250ppm (NaCl) softened tap water, 77℉(25℃), 15% recovery, pH 7.5 and the specified applied pressure.
Permeate flows for individual elements may vary ±20%.
For the purpose of improvement, specifications may be updated periodically.
The membranes are tested and certified by NSF International against NSF/ANSI Standard 58.