Wavey Perspex® Coloured Acrylic Light Switch Surrounds suitable for single and double switches. These can be supplied in a variety of 25 different gloss colours, 6 different matte colours, as well as clear, glass "look" and frosted clear acrylic.

Dimensions:

- Single Switch: Outer dimensions 151mm x 151mm, Internal cut out dimensions 75mm x 75mm

- Double Switch: Outer dimensions 210mm x 151mm, Internal cut out dimensions 135mm x 75mm

Produced from 3mm Perspex, the Light Switch Surrounds sit between the wall and the switch which means there is no requirement for adhesive or screws.

Fitting Advice:

The Perspex Light Switch Surrounds can be easily fitted by removing the two screws and fascia plate (if the switch has one). Once the screws are removed, simply slide the Acrylic surround diagonally over the switch which allows the positioning to be adjusted without the need to remove any electrical wires. Once the Switch Surround is behind the socket and has been adjusted to the correct position, gently tighten the screws to secure the light surround. In some instances, slightly longer screws may be required to compensate for the thickness of the Switch Surround, which can be purchased at any local hardware store. We recommend seeking advice of a competent electrician if there are any concerns about fitting the Switch Surrounds.

Please Note - Colours may vary due to the resolution of different monitors.