MOSKY Guitar Multi Effect Pedal Reverb Delay Looper Overdrive Distortion Chorus

Sol918 Multi Effects

Features:

Multi-Effects Pedal: Reverb+Delay+FX Loop+Overdrive+Distortion, 5 effects in 1 unit.
Distortion: based on SHUR RIOT distortion, the distortion is a versatile high-gain distortion pedal with the sonic characteristics and touch sensitivity of a high quality 100 watt tube amplifier. The distortion will transform a super clean amp into an authoritative rock tone that inspires all of your favorite riffs.
Overdrive: based on analogman king of tone overdrive. so you can use the full range of the DRIVE knob and it has a little more drive at the top than a normal gain KOT. The mode is improved though, for a louder, stronger distortion sound.
FX Loop: the SEND and RETURN jacks let you expand your board with other pedals, the FX LOOP point is positioned between the Delay and Overdrive modules.
Delay: based on Mad professor deep blue delay, the delay is a natural sounding digital/analog delay, with the analog direct signal path. containing just the basic delay features: Delay Time, Delay Level and Repeat controls. It was designed to work as an ambiance delay; like that of a vintage tape echo and the repeat , the formation was specifically designed to allow easy setting and less critical setting of delay time.
Reverb: based on Malekko Omicron SPRING Reverb, the Spring Reverb Emulator sports a dwell circuit that gives it nearly bottomless depth and a Mix control for wet/dry.
True Bypass: for eliminating any signal interference when all switched off.
Application Range: suitable for guitar, bass and other electroacoustic musical instrument.

Specifications:
Material: Metal
Power Jack: 9VDC, negative tips (regulated recommended)
Item Size: 230 * 69 * 36mm / 9.06 * 2.71 * 1.42in
Item Weight: 494g / 17.43oz
Package Weight: 571g / 20.16oz
Package Size: 25 * 8.5 * 6.5cm / 9.84 * 3.35 * 2.56in

Packing List:
1 * Effect Pedal

1 * Manual (English)



BP Booster

Product Features:
Based on X EP booster Pedal.
Uses the highest quality parts available with a discrete FET design and low impedance output, the BP Booster provides up to +20dB of unadulterated boost with multi-dimensional, shimmering highs and lows, and no ear fatigue.
The internal DIP switches let you choose the boost frequencies, and EQ settings.
LED light for indicating effects or bypass status.
Full metal shell and compact size, durable and portable.

Specifications:
Internal DIP switches
Input Impedance: 1M ohm
Output Impedance: 1k ohm
Power Supply: 9VDC or 18V (center minus plug)(not included)
Package Size: 12 * 7 * 7cm/ 4.7 * 2.8 * 2.8in
Package Weight: 196g / 6.9oz

Note:
Power adapter is not included.
Please use the power adapter whose polarity is positive pole outside and negative pole inside. Otherwise, the product may not work properly.

Package Includes:
1 * Guitar Effect Pedal
1 * User Manual(English)




SKY Reverb & Delay

Feature:
The three effects :Digital delay,Digital Delay-verb,Digital Reverb
Two independently modules: Digital Delay-verb,Digital Reverb
Digital delay-verb module provides the delay time of 1300ms
Digital reverb module is multi-parameter adjustable
Digital reverb module provides atmosphere reverb with long time

Specifications:
Input Impedance 1MΩ
Output Impedance 1KΩ
Power Supply : DC9V 100mA
Dimension(L*W*H):11.5*6.5*5CM

Weight:300g


Packing List

1X effect pedal

1X Manual




Classic AC-30

Built in speaker simulation is an integral part of the CLASSIC Series circuitry. Each model is tuned to match the speaker/cabinet of that amplifier. It is designed for a smooth, even response as

would be achieved by a multiply-miked cabinet, without the peaks, valleys, and notches associated with single miking.The shape of the speaker curve will not adversely effect or interfere with the
frequency response of your own cabinet.There is no need to defeat the speaker simulation circuit when using it with a guitar amplifier.The speaker simulation works in tandem with the EQ controls to custom tailor the overall sound.

GUIDE TO CONTROLS
LEVEL: Adjusts the output level of the unit. This control has an exceptionally wide range for maximum compatibility with a variety of equipment.
LOW, HIGH, MID: On-board post-EQ section gives you full control, like having a studio mixing board at your fingertips. Unlike passive tone controls that only cut, these active controls cut and boost ±12dB. Low is tuned to 125 Hz; High frequency is 3.2 kHz. Mid is custom tuned for each model.
DRIVE: Adjusts the overall amount of gain and overdrive, similar to when the output section of a tube amp is being pushed.The first half of the rotation will increase the volume as well as the overdrive.

VOICE*: Voiced differently for each pedal in the series. It sweeps through various

tonal possibilities associated with each style of amplifier. In addition to modifying the frequency response, Voice also influences the attack and drive characteristic of each particular amplifier style. Therefore, you may need to adjust your gain and tone settings after tweaking the Voice control.


-Input Impedance  1MΩ
-Output Impedance 1KΩ
-Power Supply : DC9V 100mA,Center negative
-Dimension(L*W*H):11.5*6.5*5CM
-Weight:300g


Packing List

1X Effect Pedal

1X Manual




Classic F-DER


Description:


CLASSIC F-DR based on Tech21 SansAmp Character Series Blonde Built in speaker simulation is an integral part of the CLASSIC Series circuitry. Each model is tuned to match the speaker/cabinet of that amplifier. It is designed for a smooth, even response as would be achieved by a multiply-miked cabinet, without the peaks, valleys, and notches associated with single miking.The shape of the speaker curve will not adversely effect or interfere with the frequency response of your own cabinet.There is no need to defeat the speaker simulation circuit when using it with a guitar amplifier.The speaker simulation works in tandem with the EQ controls to custom tailor the overall sound.


GUIDE TO CONTROLS:


LEVEL: Adjusts the output level of the unit.This control has an exceptionally wide range for maximum compatibility with a variety of equipment.


LOW, HIGH, MID: On-board post-EQ section gives you full control, like having a studio mixing board at your fingertips. Unlike passive tone controls that only cut, these active controls cut and boost ±12dB. Low is tuned to 125 Hz; High frequency is 3.2 kHz. Mid is custom tuned for each model.


DRIVE: Adjusts the overall amount of gain and overdrive, similar to when the output section of a tube amp is being pushed.The first half of the rotation will increase the volume as well as the overdrive.


VOICE: Voiced differently for each pedal in the series. It sweeps through various

tonal possibilities associated with each style of amplifier. In addition to modifying the frequency response, Voice also influences the attack and drive characteristic of each particular amplifier style.Therefore, you may need to adjust your gain and tone settings after tweaking the Voice control.


Pecification:


-100% brand new and high quality.

-Input Impedance  1MΩ

-Output Impedance 1KΩ

-Power Supply : DC9V 100mA,Center negative

-Dimension(L*W*H):11.5*6.5*5CM

-Weight:300g


Package List:


1 x Guitar Effect Pedal




Classic M-SA



Description:


CLASSIC M-SA based on Tech21 SansAmp Character California

Built in speaker simulation is an integral part of the CLASSIC Series circuitry. Each model is tuned to match the speaker/cabinet of that amplifier. It is designed for a smooth, even response as would be achieved by a multiply-miked cabinet, without the peaks, valleys, and notches associated with single miking.The shape of the speaker curve will not adversely effect or interfere with the frequency response of your own cabinet.There is no need to defeat the speaker simulation circuit when using it with a guitar amplifier.The speaker simulation works in tandem with the EQ controls to custom tailor the overall sound.


GUIDE TO CONTROLS:


LEVEL: Adjusts the output level of the unit.This control has an exceptionally wide range for maximum compatibility with a variety of equipment.


LOW, HIGH, MID: On-board post-EQ section gives you full control, like having a studio mixing board at your fingertips. Unlike passive tone controls that only cut, these active controls cut and boost ±12dB. Low is tuned to 125 Hz; High frequency is 3.2 kHz. Mid is custom tuned for each model.


DRIVE: Adjusts the overall amount of gain and overdrive, similar to when the output section of a tube amp is being pushed.The first half of the rotation will increase the volume as well as the overdrive.


VOICE: Voiced differently for each pedal in the series. It sweeps through various tonal possibilities associated with each style of amplifier. In addition to modifying the frequency response, Voice also influences the attack and drive characteristic of each particular amplifier style.Therefore, you may need to adjust your gain and tone settings after tweaking the Voice control.


Pecification:


-100% brand new and high quality.

-Input Impedance  1MΩ

-Output Impedance 1KΩ

-Power Supply : DC9V 100mA,Center negative

-Dimension(L*W*H):11.5*6.5*5CM

-Weight:300g


Package List:


1 x Guitar Effect Pedal



Classic M-Shall

Features:


*100% brand new and high quality.

*Built in speaker simulation is an integral part of the CLASSIC Series circuitry. 

*Each model is tuned to match the speaker/cabinet of that amplifier. 

*It is designed for a smooth, even response as would be achieved by a multiply-miked cabinet, without the peaks, valleys, and notches associated with single miking.

*The shape of the speaker curve will not adversely effect or interfere with the frequency response of your own cabinet.There is no need to defeat the speaker simulation circuit when using it with a guitar amplifier.

*The speaker simulation works in tandem with the EQ controls to custom tailor the overall sound.


GUIDE TO CONTROLS

-LEVEL: Adjusts the output level of the unit.This control has an exceptionally wide range for maximum compatibility with a variety of equipment.

-LOW, HIGH, MID: On-board post-EQ section gives you full control, like having a studio mixing board at your fingertips. Unlike passive tone controls that only cut, these active controls cut and boost ±12dB. Low is tuned to 125 Hz; High frequency is 3.2 kHz. Mid is custom tuned for each model.

-DRIVE: Adjusts the overall amount of gain and overdrive, similar to when the output section of a tube amp is being pushed.The first half of the rotation will increase the volume as well as the overdrive.

-VOICE: Voiced differently for each pedal in the series. It sweeps through various tonal possibilities associated with each style of amplifier. In addition to modifying the frequency response, Voice also influences the attack and drive characteristic of each particular amplifier style.Therefore, you may need to adjust your gain and tone settings after tweaking the Voice control.


Product parameters:


Input Impedance  1MΩ

Output Impedance 1KΩ

Power Supply : DC9V 100mA,Center negative(Not included)

Dimension(L*W*H):11.5*6.5*5CM

Weight:300g (approx.)

Package Includes:


1 * Effect Pedal




Blue Ocean Chorus


Product Features:

True-Bypass Switching Circuit.
True bypass means that when the effect is off your guitar tone will not be affected at all.
The true bypass circuit makes sure you have absolutely no tone loss or signal reduction.
through the chorus pedal in the off/bypass mode.
Full metal shell and compact size, durable and portable.

Specifications:
Input impedance: approx. 400K
Output impedance: approx. 2K
Current consumption: 40mA at 9VDC
Power Supply: DC 9V adapter (center minus plug)(not included)
Package Size: 12 * 7 * 7cm/ 4.7 * 2.8 * 2.8in
Package Weight: 196g / 6.9oz

Note:
Power adapter is not included.

Please use the power adapter whose polarity is positive pole outside and negative pole inside. Otherwise, the product may not work properly.


Package Includes:
1 * Guitar Effect Pedal
1 * User Manual(English)




Mini C4 Compressor

Features:
Rotate sustain, attack, level, clipping--4 knobs to adjust, control, finally get desired sound.
True bypass provides transparent tone, perfectly retains the original guitar tone.
Solid durable aluminium alloy shell; glitter silver coating, rust-proof, long lasting; whole, classic, simple, nice.
Compact compressor guitar effect pedal, pocket size, light weight, convenient to anywhere.
Work stable, well, effectively reduce dynamic range, make the tracks sound more polished, provide round smooth tone.

Specifications:
Material: Aluminium alloy
Color: Silver
Item Size: 94*39*32mm / 3.70*1.53*1.25in
Item Weight: 165g / 5.82oz
Package Size: 11*6.5*6cm / 4.33*0.25*0.23in
Package Weight: 180g / 6.34oz

Note:
Compressor only, DC 9V power adapter and other accessories in pictures are not included.
Due to lighting or other reasons, the picture and material object may slightly differ.
Due to manual measurement, there may be deviation, please in kind prevail.

Packing List:
1 * Compressor



Single Tap Switch


Features:

Can be used with a variety of pedal types.
Perfect for pairing with other tap pedal, such as Delay.
With one normally open momentary footswitch and one 1/4" output jack.
Compact size with full metal shell, lightweight and durable.

Specifications:

Connector: 1/4" jack
Item Size: 5 * 5 * 3cm / 2 * 2 * 1.2in
Item Weight: 88g / 3.1oz
Package Size: 11.5 * 6.5 * 6cm/ 4.5 * 2.6 * 2.4in
Package Weight: 120g / 4.2oz

Package List:

1 * Tap Switch Pedal 




1. We only accept Paypal payment.
2. Great appreciate for prompt payment. Unpaid item will be filed without receiving payment in 14 days after listing ended.
1. All items will be shipped to buyer's ebay address. Before you pay, please make sure your address in ebay matches the address you would like us to ship to.
2. We will dispatch the item within the handling time (weekends and public holidays are not conginized as business days) after confirming your full payment.
3. As there are weight and cubage restrictions on international order, we are unable to offer you any discount. There is no local pickup service, no third party shipping carrier will be used.
4. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
1. We are committed to give you the best customer service possible. If the item disappoints you for any reason, please contact us and we'll assist you with a prompt solution. We'd like to settle any problem in a friendly manner. 
2. We want to make sure you are happy with our item. If you want to return the item for any reason, contact us within 14 days from the delivery date and we will give you a refund or exchange. Only unused, undamaged and original condition item can be qualified for a return. Buyer is responsible for return shipping fee. Please contact us to get a RMA number BEFORE sending out your return. Goods without RMA number will NOT be accepted. Please write the RMA number on the returning package. 
3. We will not be liable to customer for any damages beyond the amount of money that customer actually paid us.
Our aim is to offer our clients items with high quality and fast delivery, also our price will be reasonable.
1. We are care about our valued buyers. Please contact us through email with any questions or concerns. We will reply your messages within 2 business days. Emails, which are received at weekend, will be replied on Monday. If you do not receive a response in expected time period from us, please check your junk or spam mailbox. 
2. If you are happy with our item and service, please do leave us positive feedbacks and 5 stars rate. Please email us before leaving any 1 or 2 ratings, neutral or negative feedbacks or open any cases. We understand the concerns and frustrations you might have and we, of course, will do our endeavor to resolve the issues. Please give us opportunities to resolve any problems. We thank you for your effort to make this sale and purchase experience a happy one!

DataCaciques