A genuine 1.0 mm mainshaft shim [part number 24461948] for the updated M32 Gen 2 end-case upgrade. This shim is required when fitting the upgraded endcasing to the M32 gearbox — the correct shim thickness is selected during the rebuild measurement procedure to set the correct mainshaft preload. Fits positions 31 and 56 on the M32 exploded diagram.
Fits transmission: M32 Gen 2 [updated endcasing] — does NOT fit the first-generation M32 with the original smaller endcasing
OE part number: 24461948
Dimensions: 1.0 mm thickness
Material: Metal
Fitment location: Positions 31 and 56 on the M32 gearbox diagram [upper and lower mainshaft end-case shim positions]
Note: Shim thickness is determined during the gearbox rebuild measurement process and cannot be pre-selected. Please measure before ordering. This part should only be fitted by an experienced transmission technician.
The correct shim thickness is determined by measuring the endplay/preload of the mainshaft assembly once the gearbox is stripped and the updated endcase is fitted. This measurement must be taken with calibrated tools during the rebuild — it cannot be determined from the vehicle registration or gearbox code alone.
No — this shim is designed for the updated [Gen 2] M32 endcasing only. The original M32 endcase uses a different shim specification. Eco Torque stocks the complete M32 updated endcase upgrade kit if you require the full assembly.
The endcase shim sets the correct preload and endplay on the mainshaft bearings when the updated endcasing is fitted. Incorrect shim selection results in either excessive bearing preload [which causes heat and premature failure] or excessive endplay [which causes noise and wear].
No — the updated endcasing has different dimensional tolerances to the original. New shims in the correct measured thickness must always be used when fitting the updated endcase upgrade.
Yes — Eco Torque stocks M32 mainshaft shims in multiple thicknesses to cover the full measurement range. If you need a different size after measuring, contact us with your measurement and we will supply the correct shim.
As specialists in gearbox rebuilds and repairs, Eco Torque takes pride in offering genuine gearbox parts, high-quality aftermarket alternatives and competitive pricing.
If you are unsure whether this part is compatible with your vehicle, send us your UK registration number or VIN and we will help you find the correct part.