The MTC Mamba Lite eye piece focus ring is too big to fit a 43 or 45 Pard mount. (45.72mm) and the Eye piece tube is 41.35mm,

With the 48mm Pard this leaves a huge gap, that Insulation tape cant fill.

So I have designed a 2 piece hinged Bush that allows the 48mm Pard Mount to be used.

The bush is 20mm long


=========================================================

If you have a Pard 007 you will already know this, but the whole experience is ruined by relying on insulation tape to fit the pard onto your scope.

The tape cant be laid true and eventually squishes down and causes pard wobble.

Also if you want to swap the pard onto your other rifles, you then are left with sticky tape on your scope eye peices.

and if you dont use tape then the pard mount will scuff your scope up.

I have designed and 3d printed this spacer which transforms the pard 007 experience, as:
1) Mounts rock solid
2) Is perfectly aligned . All I had to do was X=-24 and Y=056 to align the pard cross hairs.
3) It also stays exactly in place
4) Wont droop
5) Wont Scuff your scope
6) Is faster and cleaner when moving the pard from one rifle to another.
7) the pard can be mounted at its closest postion - which makes the end result very compact (see photo 2)

This one is for a 41.35mm eyepiece tube (MTC Mamba Lite) and the 48mm Pard Spacer.

FYI Pard mounts come in 3 i/d's 43mm, 45mm and 48mm - this advert is for the spacer that fits the 48mm. 

If you require other sizes just let me know.  but be aware a 45mm spacer won't work in a 43 or 48!!!