ARB Twin Air Compressor (12v) Mount Bracket Manifold Digital Gauge CKMTA12
This bespoke kit includes the ARB High Output Twin Air Locker Compressor (12v), the Mounting Bracket, Air Locker Manifold, Tyre Inflation Kit Hose & Digital Inflator Gauge
High Output Twin Air Compressor (12v)
12 volt
ARB high-volume twin on-board compressor to suit the high volume airflow needs of most air powered tools. It also suits the actuation and control needs of the ARB Air Locker in the harsh and demanding environment of the ARB Air Locker user.
Applications
> Pneumatic supply and electrical control for ARB Air Locker(s). (Air Locker Manifold Kit #171503 required)
> Rapid inflation of small, medium and large tires.
> Air tools rated up to 85LPM [3CFM] @ 6Bar [90PSI] continuous supply.
> Air tools rated higher than 85LPM [3CFM] @ 6Bar [90PSI] using an optional air tank suitable to the run time requirements.
Kit Includes
> Fully assembled and tested air compressor - 12V
> Complete wiring loom w/ Air Locker solenoid plug-in terminals.
> Automotive OEM quality compressor isolating switch.
> 2 x relocatable splash resistant air filters with washable high-flow sintered bronze filter cartridges.
> Mounting bolts and washers.
> Comprehensive photo illustrated installation guide.
Dimensions (LxWxH)
mm (278 x 190 x 105)
inch (10.9 x 7.5 x 4.1)
Features
> Constructed primarily of light weight, high strength, engineering grade materials, including military and aerospace standard components.
> Pressure switch controlled air manifold system regulates pressure between 9.3Bar [135PSI] and 10.3Bar [150PSI] suited to air tools and all ARB Air Locker equipped vehicles.
> Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
> High efficiency design consumes only 56 Amps at maximum air flow.
> Built with sealed components for moisture and dust resistance.
> Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
> Ducted IP55 sealed brushless DC cooling fan and anodized motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% duty cycle (under room temperature conditions).
> Anti-vibration / sound deadening is integrated into the mount.
> Relocatable splash resistant air filter assemblies for cleaner, cooler air supply and versatile waterproof air intake positioning.
> High density and high flow washable sintered bronze air filter elements.
> Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
> Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
> Motors are water sealed, 100% ball bearing equipped (i.e., no bushings used), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
> Motors are internally thermal protected against extreme temperature damage.
> Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing.
> Over-pressure safety valve equipped.
> Sealed illuminated automotive grade dash switch included.
> Fully serviceable and all replacement parts available.
> EMF suppressed for use in proximity to sensitive electronic equipment.
> CE and C-Tick compliant.
> Engineered, built, and individually dyno-tested in Australia from local and imported components.
Manifold Kit
Designed for the remote mounting of air locker solenoids.
Stainless steel braided PTFE hose and fittings connect to and cool the compressor outlet air.
Kit includes
> Manifold body with mounting bracket
> 2 x BSPP ports for installation of up to 2 x Air Locker solenoids
> 2 x ¼” NPT ports, one to be used as an input and the second could be used for installation of a pump up kit
> 1 x high temperature resistant Teflon stainless steel braided hose with heavy duty JIC4 fittings
> 2 x JIC4 - ¼” NPT nipples to connect the included hose to the compressor outlet and manifold kit input
> 2 x M6 hex head bolt and nylon lock-nuts for securing the manifold kit
Tyre Inflation Kit
Provides fast, accurate inflation.
Length: 7m (23ft)
The ARB tyre inflation kit for air compressors is specially sourced from Japan, providing a unique high-heat tolerant hose for the hi-output compressor. The practical kit includes a dust resistant air chuck and an enclosed internal bearing system to prevent dirt ingestion.
> Suitable for camping, touring and off-road applications as well as everyday usage.
> Provides fast, accurate inflation.
Kit includes -
1 x high heat pressure hose
1 x ARB air chuck with quick press fitting
1 x ARB T-fitting for use with the ARB air compressor and an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and footballs
Digital Tyre Inflation Gauge
Provides accurate readings and inflation
Keeping accurate tyre pressure is a necessity for good fuel economy, prolonged tire life and maximum traction off-road. The ARB Digital Tyre Inflator Gauge provides accurate readings and inflation. It is an extremely simple operation with its large, blue backlight display, thumb operation inflator button and simple deflator bleed button. The 600mm dual swivel PVC coated braided hose and clip-on air chuck eliminates the need to bend over while inflating your tyres and the backlight ensures you know the exact pressures no matter if it is day or night.
> Corrosion resistant die-cast body
> Rubber bump guard to protect against drops and knocks
> Large LCD digital readout with blue backlight
> Multiple measurements
> Pressure sensing auto wake up display
> Battery level indicator
> Precision clip on connector
> Air bleed button for accurate pressure adjustment
> Extended stainless steel braided kink resistant hose with PVC sheath and dual swivel joints for use at any angle
> Coated thumb trigger
> Up to 200 hours runtime on set of batteries
Specification
Reader unit - Digital display
Connector type - Clip-on
Scale - 0-14 Bar / 0-200 PSI / 0-1400 KPA
Inlet thread size - 1/4” NPT Female
Hose length - 600mm
Dimensions - 95mm L x 75mm W x 28mm H
Weight - 0.5kg
Accuracy - +/- 1 PSI within 25-75 PSI range
Max supply pressure - 350 PSI, 240 KPA
Batteries - 2 x AAA (supplied)
Battery life - Up to 200 hours