200x200, 1.54inch E-Ink Display Module, SPI Interface

Overview

This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

 

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

 

Features

No backlight, keeps displaying last content for a long time even when power down

Ultra low power consumption, basically power is only required for refreshing

SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.

Onboard voltage translator, compatible with 3.3V/5V MCUs

Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

Operating voltage: 3.3V/5V

Interface: 3-wire SPI, 4-wire SPI

Outline dimension: 48mm × 33mm

Display size: 27.6mm × 27.6mm

Dot pitch: 0.138 × 0.138

Resolution: 200 × 200

Display color: black, white

Grey level: 2

Partial refresh time: 0.3s

Full refresh time: 2s

Refresh power: 26.4mW(typ.)

Standby power: <0.017mW

Viewing angle: >170°

Interface

SYMBOL

DESCRIPTION

VCC

3.3V/5V

GND

Ground

DIN

SPI MOSI pin

CLK

SPI SCK pin

CS

SPI chip selection, low active

DC

Data/Command selection (high for data, low for command)

RST

External reset, low active

BUSY

Busy status output, high active

Dimensions

PACKAGE CONTENT

Weight: 0.024 kg

  1. 1.54inch e-Paper Module x1
  2. PH2.0 20cm 8Pin x1