May you Like
ANDELI Inverter MIG Welder 210amp DC Lift-TIG MMA Welding Machine Gas Gasless
DESCRIPTION
This is a quality DIGI synergic gas/gasless MIG with lift-TIG MMA multi-process welding machine, which is very simple to operate so it is perfect for garage, farm, mobile technicians, DIY and other repair services. It is suitable for both 110V and 240V single phase mains power supply and comes with a 13amp 3 pin UK standard plug adaptor.
FEATURES
- MIG/MAG/FLUX/LIFT TIG/ MMA(ARC/STICK) 5 welding modes
- DIGI Synergic System control: the current, voltage and feeding speed can be synchronously changing to correctly get matching each other so very easy to use.
- Stable wire speed, power saving, no electromagnetic noise
- Full protections: over current protection, over heat protection and over load protection
- Reverse Polarity Facility (Gasless) - Allows use of self shielding flux cored wires for outdoor applications
- Feed wire speed can be adjustable
- Wire diameter size range: 0.8/1.0(mm)
- Fitted feed roller size: 0.8(mm)
- Wire reel size can be up to 5kg
- Soft start - When MIG welding wire only feeds slowly until the welding arc has been established
- Comes with a quality 3m 15AK Euro Standard Connector MIG torch
- Dinse Plug Size: 10-25
- TIG arc start method: Lift (Please note the TIG function is lift arc start, not High Frequency ignition arc start)
- AUTO ARC FORCE, HOT START and No stick technology
- Usable electrode 1.6 - 4.0mm for MMA welding
- IGBT technology inverter - more efficient and easier to use than a transformer or MOSFET
- LED digital displays
- CE approved
- Suitable for 110V and 240V single phase mains and comes with a 13amp 3 pin UK standard plug adaptor
- Compact portable design and light weight
- Provides very smooth low splatter welds on all steels due to its inverter technology
- This machine is not suitable for welding aluminium and aluminium alloys
SPECIFICATION
| Brand | ANDELI |
| Power Supply | AC110V - 220V+/-15% Single phase (50-60Hz) |
| Rated Input Capacity(KVA) | 6.8 at MIG, 6 at Lift TIG, 8 at MMA |
| No-load Voltage (V) | 56+/-5 |
| Welding Current Range (A) | 40 - 210 |
| Rated Duty Cycle (25C °) | 60% |
| Wire Reel Size (KG) | 0 - 5 |
| Welding wire size range | 0.8/1.0 (mm) |
| Fitted feed roller size | 0.8 (mm) |
| Wire feed speed | 2 - 14m/min |
| Transistor Technology | IGBT |
| Machine system | DIGI synergic system |
| Welding Process | MIG/MAG/FLUX/LIFT TIG/MMA |
| TIG arc start method | Lift |
| ARC FORCE/HOT START | AUTO |
| Anti-stick | Yes |
| Gas/Gasless | Yes |
| Efficiency | 70% |
| Insulation Class | F |
| Protection Class | IP21S |
| Net Weight (kg) | 10 |
| Measurements (mm) | 420 x 205 x 330 |
PACKAGE CONTENT
ANDELI MIG-210S DC Inverter Welder, 3m MIG Torch, 3m Earth Lead, 3m MMA Lead, Instruction manual, Wire Brush, Welding face mask.
