CAM & GROOVE FITTING, 304 STAINLESS STEEL MALE ADAPTER/ MALE NPT

Type F 304 stainless steel camlock adapters – male adapter by male thread, fit into any female couplers including Type C, D, B & DC (Dust Cap). Quick hose camlock coupling can finish sealing in a snap without any requirement of tools. Stretch the arms of the coupler, and then insert the adapter into the coupler until it contacts with the gasket.

• Male NPT threaded connection x Male Adapter
• 304 Stainless Steel for strength and resistance to corrosion and chemicals.
• Coupling Type: F
• Maximum Temperature: 250° F
  
• Available in 3/4", 1", 1-1/4", 1-1/2",2" sizes

Safety Notes:
Under no circumstances should cam and groove couplings be used for compressed air or steam service!

Pressure rating recommendations are based on the use of mating fittings at ambient temperature 70°F with a standard seal installed.

Cam locks are suitable for transfer of water and compatible chemicals/vapors. PRM is in no way is responsible for the selection, suitability of, nor the material compatibility of materials being pumped through the fittings.

PRM is expressly not responsible for all installations and any damages due to leaks, ruptures, bursts, explosions or other damages. Damages limited to only the replacement of the defective items. Final decision on warranty is at the sole discretion of PRM Filtration Management.