Store Categories
Why Buy From us
CNC ER32 Spindle Motor 4.5KW Air Cooled 380V 18000rpm & 5.5KW VFD Inverter Kit
ITEMS DESCRIPTION
无标题 2

CNC ER32 Spindle Motor 4.5KW Air Cooled 380V 18000rpm & 5.5KW VFD Inverter Kit

Package included :

1 x 4.5KW Spindle Motor
1 x 5.5KW sunfar VFD Variable Frequency Driver

Note : Provide the default Collet ER32 12.7mm, if not  please do contact us for a better solution.

Spindle Motor Specifications :

Model GDZ120*103-4.5 
Product type Square High-Speed Motorized Spindle Motor for Woodworking
Brand Changsheng(Made in China)
Speed 18000rpm
Power  4.5KW
Voltage 380V
Current 9.5A
Frequency  300Hz
Collet ER32 12.7mm default 
Lubrication Grease
Cooling type Aircooling
Bearings 2x7008c P4   2x7004c P4

VFD Specification :

Model E550-4t0055L
Power (KW) 5.5KW
Input Voltage(V) 3-phase AC 380V ±20% 50/60Hz
Output Voltage(V) 0~380V
Output Current(A) 13A
Output Frequency (Hz) 0~1000Hz
Origin& Warranty&brand China & One year&sunfar

 

 
 
Kindly Note :

  • Motorized spindle motors are matched with inverters, choosing inverters  should be according to the current, voltage, and frequency of motorized  spindle motors.

  • Setting the inverter must firstly set up the basal frequency, its basal  frequency is based on the highest frequency of motorized spindle motor, if  not setting the basal frequency (the factory setting is 50Hz),the motorized  spindle motor would burn out once start running;

  • The highest frequency, break frequency and the corresponding voltage also  should be set according to the curve on the operating instruction; setting  the current of the inverters is also based on the rated current of motorized  spindle motor;

  • The overcurrent is 120% of rated current; overload tripping is 100%, time is  5s; 
    Carrier frequency is set by the power of spindle motor,8kHz for less than  10KW motorized spindle motor, 5kHz is for more than 10KW spindle motor;

  • The acceleration time and deceleration time are 10s and 20s respectively, if  starting current exceed the rated current and need protection, it should  extend the acceleration time.

  • I/O lack-phase protection also should be set above the function of  protecting inverters and motorized spindle motors.

  • Connecting the inverter and the three-phase power of spindle motor, solder  the inverter three-phase power cord on the plug 1(U1),2(V1),3(W1), plug 4 is  ground wire. Then the inverter is connected with the external power supply  and start work, then to check whether the rotation direction of spindle  motor is consistent with its indication direction, if inconsistent,  immediately shut down and change two wire on the three-phase power supply of  connecting inverter and motorized spindle motor. The motorized spindle motor  is prohibited running in the wrong rotation direction.

  • Power lines should be taken waterproof and shielding measures. The  connection between motorized spindle motor and inverter should not exceed  25m.When the power cord of the water-cooled spindle motor connects the  terminal block, it must be bent into U shape and fixed on the bottom of the  terminal block and then connect, so that can protect the condensed water of  the power cord into the terminal block.

  • Another, use shielding power lines to prevent its interference to inverter.

无标题 2
We maintain high standards of excellence and strive for hundred percent customer satisfaction.
Feedback is very important to us.
We hope that you contact us immediately before you give neutral or negative feedback, so that
we can address your concerns. It is impossible to address issues if we do not know about them!
Thank you !

1. We accept PayPal payment only
2.Payment must be received within 7 days after order is made.
3.Fees such as import duties, taxes are not included in the item price or shipping costs .

These charges are the buyer's responsibility.

Your satisfaction is our ultimate goal. We work hard to earn your trust and future business.

Our certified technicians have tested each item before shipping.
The unit comes with 1 year limited warranty on all manufacturing defects.
 
 a) If you receive a defective item, you may return it or ask for a discount. 
Please contact us within 14 days after you receive the package. 
 
b) What you returned must be intact and in its original packaging.

Fast to Buy Limited - CNC Solution is specialized in CNC parts and solutions, we supply Fanuc

Mitsubishi,Siemens, Fagor CNC machine parts and accessories, Engraving & milling solutions, spindle
motor with VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw,
linear guide rail, 3D printer parts, etc.
If you need any CNC parts or repairs, welcome to contact me, we will try our best to help you .

Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to jet leg, our reply to your questions may not be immediately.
But within above working time, we will reply your email within 24 hours.

If it's non-workdays,please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
 
Copyright vipwindows_168 Rights Reserved.
PushAuction

On Aug-16-21 at 03:13:21 PDT, seller added the following information:

DataCaciques