ANCEL BZ700 For Mercedes Benz OBD2 Scanner All System Diagnostic Car Code Reader
ANCEL BZ700-Professional All Systems Diagnostic Tool 2000-2022 fit for Mercedes-Benz fit for Sprinter fit for Smart Series Vehicles.
ANCEL BZ700 Product Features：
1. Full Systems Diagnostics: Not only read and clear fault codes of the main systems (engine, airbag, transmission, ABS, SAS, SRS, EPB, DPF, TPMS, etc.), but also supports body, chassis, powertrain and all control modules.
2. 10+ Reset Service: Transmission adaptation, Battery Registration, Battery Voltage Test, Throttle Relearn, ABS Bleeding, TPMS Reset, EPB Reset, SAS Reset, Oil Reset etc.
3. Auto VIN Quick Test: Auto VIN technology can automatically identify model and year information in no time.（Only Mercedes Benz is supported）
4. Support 10 Languages:English, German, French, Spanish, Russian, Portuguese, Finnish, Danish, Swedish, Norwegian.
5. Fit for All Mercedes Benz/Fit for Sprinter/Fit for Smart with OBD2 interface 16PIN from 2020 to 2022.
Not support 38 Pin Vehicles as Following:
107(1971-1989),
124(E Class 1984-1994)
129(SL Class 1989-2001)
126(S Class 1979-1991),
140(S Class 1991-1998),
170(SLK Class 1996-2004),
201(190 1982-1993)
202(C Class 1993-2000),
208(Up to 2002),
210(E Class 1995-2002),
461(G Class)
463(G Class 1990-)
ALL SYSTEM DIAGNOSTIC FIT FOR MERCEDES FIT FOR BENZ FIT FOR SPRINTER FIT FORSMART ONLY.
Engine System:
It supports full modes OBDII functions. Easily identify car problems and turn off engine lights. Help you pass emissions test and keep your car in best condition. Save gas and improve performance.
Transmission System:
It can help before transmission problems become a big hassle. That's because most trouble codes come from your vehicle's transmission. With a transmission diagnostic tool, you can get a fault code if there is one.
Airbag System:
The SRS (Supplemental Restraint System) is a device that deploys the airbag to protect the passenger before the second collision occurs. The BZ700 OBD2 scanner can read/clear the code and turn off the airbag warning light.
ABS System:
ABS automatically controls the braking force of the brake when the car brakes, so that the wheels do not lock and enter the state of edge rolling slip (slip rate is about 20%) to ensure the maximum grip between wheels and ground.
Battery Matching System:
The BZ700 allows the scan tool to evaluate the battery charge level, monitor the short circuit current, register the battery change, activate the vehicle hibernation mode and charge the battery via the diagnostic socket.
TPMS System:
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
Steering Angle Sensor (SAS) System:
Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
A/C (Air Conditioner) System:
this function supports routine maintenance of air condition modules, for example, air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
1. Full Systems Diagnostics: Not only read and clear fault codes of the main systems (engine, airbag, transmission, ABS, SAS, SRS, EPB, DPF, TPMS, etc.), but also supports body, chassis, powertrain and all control modules.
2. 10+ Reset Service: Transmission adaptation, Battery Registration, Battery Voltage Test, Throttle Relearn, ABS Bleeding, TPMS Reset, EPB Reset, SAS Reset, Oil Reset etc.
3. Auto VIN Quick Test: Auto VIN technology can automatically identify model and year information in no time.（Only Mercedes Benz is supported）
4. Support 10 Languages:English, German, French, Spanish, Russian, Portuguese, Finnish, Danish, Swedish, Norwegian.
5. Fit for All Mercedes Benz/Fit for Sprinter/Fit for Smart with OBD2 interface 16PIN from 2020 to 2022.
Not support 38 Pin Vehicles as Following:
107(1971-1989),
124(E Class 1984-1994)
129(SL Class 1989-2001)
126(S Class 1979-1991),
140(S Class 1991-1998),
170(SLK Class 1996-2004),
201(190 1982-1993)
202(C Class 1993-2000),
208(Up to 2002),
210(E Class 1995-2002),
461(G Class)
463(G Class 1990-)
ALL SYSTEM DIAGNOSTIC FIT FOR MERCEDES FIT FOR BENZ FIT FOR SPRINTER FIT FORSMART ONLY.
Engine System:
It supports full modes OBDII functions. Easily identify car problems and turn off engine lights. Help you pass emissions test and keep your car in best condition. Save gas and improve performance.
Transmission System:
It can help before transmission problems become a big hassle. That's because most trouble codes come from your vehicle's transmission. With a transmission diagnostic tool, you can get a fault code if there is one.
Airbag System:
The SRS (Supplemental Restraint System) is a device that deploys the airbag to protect the passenger before the second collision occurs. The BZ700 OBD2 scanner can read/clear the code and turn off the airbag warning light.
ABS System:
ABS automatically controls the braking force of the brake when the car brakes, so that the wheels do not lock and enter the state of edge rolling slip (slip rate is about 20%) to ensure the maximum grip between wheels and ground.
Battery Matching System:
The BZ700 allows the scan tool to evaluate the battery charge level, monitor the short circuit current, register the battery change, activate the vehicle hibernation mode and charge the battery via the diagnostic socket.
TPMS System:
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
Steering Angle Sensor (SAS) System:
Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
A/C (Air Conditioner) System:
this function supports routine maintenance of air condition modules, for example, air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
PROFESSIONAL-LEVEL DIAGNOSTICS FIT FOR MERCEDES BENZ DIESEL VEHICLES
Diesel Particulate Filter (DPF) Regen:
Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
Injector Coding:
Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed.
Fuel Pump Activation：
Diesel vehicles perform this function when the new fuel pump needs to be emptied or the fuel tank needs to be emptied after the fuel pump is replaced.
MANUFACTURER-LEVEL DIAGNOSTICS FIT FOR MERCEDES -BENZ VEHICLE
1. Transmission adaptation : This function supports routine maintenance of transmission modules, for example, reset adaptation values, adjust the oil level.
2. Battery Registration : To put it simply, battery registration is a process of updating your vehicle with information that a brand new battery has been installed in your car.
3. Battery Voltage Test : Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
4. Throttle Relearn : Relearns the throttle valve control value while clear or replaces the throttle value.
5. ABS Bleeding : Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
6. TPMS Reset : Allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS reset after tires sensors are replaced or rotated.
7. EPB Reset : System maintenance deactivates and reactivates the EPB system for replacement and initialization.
8. SAS Reset : Allows you to perform adjustment of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor. After calibrate sensor successfully, its fault memory will be automatically cleared.
9. Oil light Service Reset : Support service lamp reset, reset service mileage and service intervals.
Diesel Particulate Filter (DPF) Regen:
Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
Injector Coding:
Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed.
Fuel Pump Activation：
Diesel vehicles perform this function when the new fuel pump needs to be emptied or the fuel tank needs to be emptied after the fuel pump is replaced.
MANUFACTURER-LEVEL DIAGNOSTICS FIT FOR MERCEDES -BENZ VEHICLE
1. Transmission adaptation : This function supports routine maintenance of transmission modules, for example, reset adaptation values, adjust the oil level.
2. Battery Registration : To put it simply, battery registration is a process of updating your vehicle with information that a brand new battery has been installed in your car.
3. Battery Voltage Test : Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
4. Throttle Relearn : Relearns the throttle valve control value while clear or replaces the throttle value.
5. ABS Bleeding : Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
6. TPMS Reset : Allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS reset after tires sensors are replaced or rotated.
7. EPB Reset : System maintenance deactivates and reactivates the EPB system for replacement and initialization.
8. SAS Reset : Allows you to perform adjustment of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor. After calibrate sensor successfully, its fault memory will be automatically cleared.
9. Oil light Service Reset : Support service lamp reset, reset service mileage and service intervals.
FULL OBD LEVEL DIAGNOSTICS FOR ALL VEHICLE BRANDS
What Could Cause the Check Engine Light to Turn On?
The check engine light can come on for many reasons. For example, oxygen sensor failure, loose fuel cap, catalytic converter failure, ignition coil issues, bad spark plug wires, vacuum leak, ect.
How to Turn Off the Engine Fault Light?
1. Read/Erase Codes : Read the fault code within 3 seconds and clear the pending fault code, and turn off the engine light.
2. Live Data Stream : Reads abundant live data stream and freeze frame data to monitor the operating status of the vehicle, including the status of the fuel system, engine coolant temperature, RPM and various sensor parameters.
3. Smog Check :The purpose of the readiness monitors is to test the emission control systems of the vehicle itself. The monitors are also known as emission monitors. Determine if your vehicle is ready for a smog test.
4. Evap System Test : The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
5. Vehicle Information : The option displays the vehicle identification number (VIN),the calibration verification number (CVN), and other information of the test vehicle.
What Could Cause the Check Engine Light to Turn On?
The check engine light can come on for many reasons. For example, oxygen sensor failure, loose fuel cap, catalytic converter failure, ignition coil issues, bad spark plug wires, vacuum leak, ect.
How to Turn Off the Engine Fault Light?
1. Read/Erase Codes : Read the fault code within 3 seconds and clear the pending fault code, and turn off the engine light.
2. Live Data Stream : Reads abundant live data stream and freeze frame data to monitor the operating status of the vehicle, including the status of the fuel system, engine coolant temperature, RPM and various sensor parameters.
3. Smog Check :The purpose of the readiness monitors is to test the emission control systems of the vehicle itself. The monitors are also known as emission monitors. Determine if your vehicle is ready for a smog test.
4. Evap System Test : The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
5. Vehicle Information : The option displays the vehicle identification number (VIN),the calibration verification number (CVN), and other information of the test vehicle.
PRODUCT DESCRIPTION
Display: 2.8″ TFT LCD, 320X240 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage:8V-18V
Operating Temperature:0C-60C(32-140F)
Storage Temperature:-20℃-70℃(4-158F)
Dimension: 6.8*3.38*1.22 inches (L x W x H)
Display: 2.8″ TFT LCD, 320X240 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage:8V-18V
Operating Temperature:0C-60C(32-140F)
Storage Temperature:-20℃-70℃(4-158F)
Dimension: 6.8*3.38*1.22 inches (L x W x H)
What's in the box?
1*BZ700 OBD2 Scanner fit for Mercedes Benz / fit for Sprinter / fit for Smart Passenger Cars & Light-duty Vans
1*USB Data Line
1*User's Manual
1*BZ700 OBD2 Scanner fit for Mercedes Benz / fit for Sprinter / fit for Smart Passenger Cars & Light-duty Vans
1*USB Data Line
1*User's Manual
1.We accepted ALL available payment via eBay.
2.For United Kingdom buyers, VAT already included in the price,no extra fees.
3.Electronic VAT Receipt available upon request.
4.If item is shipped from outside of UK, VAT/ import tax NOT included in price.
5.If you accidentally placed a wrong order, please contact us to cancel the order.
6.We Accept Return, choose [Doesn'tFit] or [Order by Mistake] when open return to get Free Return.
We will buy return shipping label & issue full refund for the 2 reasons.
If you have any question, please send eBay message to us, we will get back to you as soon as possible within 24 hours.
About Return:
We understand the diagnostic is complicated, even some mechanics don't know how to use in the beginning.
We provide free tech support. Most of time, we help buyer solve problems.
If the tool doesn't fit your cars,
We Accept Return, choose [Doesn'tFit] or [Order by Mistake] when open return to get Free Return.
We will buy return shipping label & issue full refund for the 2 reasons.
Return Address (Important)
Our Return address is different from Shipping address. Return to wrong address won't get refund.
Please send us eBay message before return. We will provide return address.
Please DO NOTuse the address on the parcel to return. That address doesn't accept, then no refund.
So before open return, please contact us to get RMA, we will buy return shipping label for you at our cost.
If youcontact us before open return, we will provide Free Return Authorization and instructions within 30 days after receipt.Items need to be in original conditions.
1.Fast & Free shipping for UK orders via Royal Mail with tracking number.
2.About Delivery :Orders placed beforeGMT 7 amwill be shipped in same day.
Orders are shipped within1 business day (excluding holiday and weekend).
3.If your package delayed few days, due to any unexpected factors, please contact us ASAP, call local Royal Mail,and we will help you to check. Your kindly understanding and patience would be highly appreciated!
About Compatibility:
If you do some research online, you will find it is very complicated about compatibility. Even a lot of mechanics are confused and buy wrong items. So send us eBay message, let us make it easier for you.
If you are NOT sure if this tool will works with your car, we can check compatibility for free.
You just need to send message to tell us:
1. Car's info: make, brand, model, made year, VIN number (17 character, not license plate number),and the main function you need
2. What function will you use or what troubles do you want to diagnose?
3. Please send clear picture to show the warning lights on dashboard.
We will check compatible tool for you.
My company is Authorized Distributor, officially authorized by brands' owner and headquarter.
All our items are 100% original and with warranty, tech support and updates service.
3 Year free repair for the devices.
Warranty automatically recorded once order placed.No need to register for warranty.
All our items are 100% original and with warranty, tech support and updates service.
3 Year free repair for the devices.
Warranty automatically recorded once order placed.No need to register for warranty.
Some high level tools do require to register to get authorization before use.
It is to avoid fake and counterfeit.
It is to avoid fake and counterfeit.
Please contact us firstly when you need warranty service.
In case an item arrives damaged or faulty, please contact us ASAP and keep it unused.
We will instruct you on how to return to get refund or replacement.
If the item has been used, we have the right to decline your claim.
Please send eBay message to us before return , we will apply Free Return, buy Return Shipping Label for you.
Who Are We?
We are professional tool provider specialized inAutomotive Aftermarket On-Board Diagnostic & Service Tools:
We are professional tool provider specialized inAutomotive Aftermarket On-Board Diagnostic & Service Tools:
For Passenger Cars
from entry level basic Code Reader,
to Professional OBD2 Scanner,
ALL System Car Diagnostic Service Tool ,
Mileage Correction Tool,
Immobilizer Key Match Tool ,Key Maker, Car Locksmith Tool,
ECU Coding Programmer,
Mileage Correction Tool,
Immobilizer Key Match Tool ,Key Maker, Car Locksmith Tool,
ECU Coding Programmer,
For HGV Trucks Lorry & Commercial Vehicles & Machinery
Heavy Duty Truck Diagnostic Tool
24V OBD2 Diesel Truck & Machinery Diagnostic Tool
Car/Truck/Motorcycle Battery Tester
For Motorcycle Motorbike Diagnostic
And Other automotive electronics
TPMS Progammer, TPMS Sensors, Battery Tester, Circuit Probe....
We are in the industry for more than 10 years.
We are authorized primary distributor of many leading companies in the industry,including brands:
Launch, Foxwell, Thinkcar, EUCLIA, Autek, ANCEL, Innova, Autophix, Kzyee, Fcar, Nexas...
and more brands will be available in our store in near future.
Launch, Foxwell, Thinkcar, EUCLIA, Autek, ANCEL, Innova, Autophix, Kzyee, Fcar, Nexas...
and more brands will be available in our store in near future.
What Do We Provide?
1.High quality original products
2.Safer,up-to-date software,and updates
3.Lifelong Free online tech support
We provide remote online assistance via TeamViewer, if you have any difficulty in software installation.
4.Our corporation is established for the purpose of trustworthiness. Your satisfaction is our priority,we assure you not only get quality products but also good service.
3.Lifelong Free online tech support
We provide remote online assistance via TeamViewer, if you have any difficulty in software installation.
4.Our corporation is established for the purpose of trustworthiness. Your satisfaction is our priority,we assure you not only get quality products but also good service.
1.If you have any problem about the goods, please contact us before return or leaving Neutral/Negative feedback.We promise to help you solve it asap, and make you feel satisfied absolutely.
2. Our business time:
Customer Service: Monday-Friday: 2:00AM - 12:00PM GMT(London Standard Time)
Shipping Service: Monday-Saturday: 9:00AM - 16:00PM GMT(London Standard Time)
If you have any question, please send eBay message, we will get back to you as soon as possible within 24 hours.
3.Please leave us Positive Feedback
and 5-stars ★★★★★ after you received our package you are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.
4.If you like the item. It is our biggest honor.
If you write a 5-stars ★★★★★Product Review in the listing page, it will help many other car owners to find suitable tools for sure.
If you write a 5-stars ★★★★★Product Review in the listing page, it will help many other car owners to find suitable tools for sure.
