FINAL DRIVE DIMENSIONS AND FEATURES:
1- This is a final drive assembly. It includes the travel hydraulic motor and the travel gearbox, all factory-assembled together, ready to install in the machine. The final drive assembly does not include the sprocket, the sprockets bolts, or the bolts to attach the final drive to the machine frame.
2- Komatsu part number it replaces: 22L-60-21101
3- This final drive has 9 equidistant bolt holes on the sprocket flange.
4- It has 9 equidistant boltholes on the machine frame flange.
5- It has 2 speeds. If your final drive has 1 speed, let us know. We can adapt this final drive to a 1-speed final drive.
6- It has 4 hydraulic hose ports (3 ports on 1 side and 1 port on the opposite side of the hydraulic motor).
7- It fits a sprocket with a center hole measuring 190 mm (7.48") in diameter.
8- It fits through a round opening in the machine frame that is 165 mm (6.496") in diameter.
9- It uses high quality internal wear parts.
10- You are getting a very durable replacement final drive, because it is manufactured by a reputable factory, under OEM standards of manufacturing and quality control.
11- Standard warranty against manufacturing defects.
12-Shipping is included. There is nothing extra to pay for freight. This applies only to shipping addresses located in the contiguous USA. For Alaska and Hawaii, please consult freight rates with us.
13- Please check our final drive dimensional diagram for more information about how our final drive would fit your machine.
EQUIPMENT THIS FINAL DRIVE FITS:
Fits the following KOMATSU mini-excavators. Please check and make sure your machine model and serial number (S/N) is in the list below. If your machine model and/or serial number does not show in the list below, please contact us and we will help you figure out the correct final drive for your machine.
Komatsu PC27MR-2, S/N 15001-UP.
Komatsu PC27MR-2-A, S/N 15001-UP.
Komatsu PC27MR-2-B, S/N 15001-UP.
Komatsu PC27MR-2, S/N F00103-UP.
Komatsu PC30MR-3, S/N 30001-UP (Japan).
Komatsu PC30MR-2, S/N 20001-UP.
Komatsu PC30MR-2-A, S/N 20001-UP.
Komatsu PC30MR-2-B, S/N 20001-UP.
Komatsu PC30MR-2-C, S/N 20001-UP.
Komatsu PC30MR-2-D, S/N 20001-UP.
Komatsu PC30MR-2, S/N F00103-UP.
Komatsu PC35MR-2, S/N 5001-UP.
Komatsu PC35MR-2-A, S/N 5001-UP.
Komatsu PC35MR-2-B, S/N 5001-UP.
Komatsu PC35MR-2, S/N F00103-UP.
OUR BACKGROUND:
1- We are an American company based in Florida.
2- We have been in the construction equipment spare parts business for 28 years.
3- We are a supplier of NEW and USED parts for all brands of wheel loaders, excavators, and bulldozers; small and large.
4- One of our specialties is final drives. We have new, and used final drives for all the major brands of excavators, and bulldozers. Request a quote.
5- We also sell most internal parts for final drives such as ring gears, planetary gears, floating seals, final drive gearbox housings, sun gears, bearings, pins, propel shafts, planetary carrier housings bare or loaded with gears, final drive covers, sprocket hubs, and more. We have these parts for John Deere, Caterpillar, Komatsu, Kobelco, Hitachi, Samsung,Volvo, Hyundai, Daewoo, and Case excavators.
6- In addition, we also supply engine rebuild kits, swing drives and its internal components, final drives and its internal components, hydraulic cylinders, hydraulic cylinder seal kits, water pumps, pump to engine couplings, monitors, controllers, rubber tracks, undercarriage parts, and many other aftermarket parts for the equipment brands we mentioned above. Give us a try. Request a quote.
OUR LOCATIONS:
We sell spare parts for construction equipment all over the world. During our 28 years in the spare parts business, we have set up 3 warehouses for better service, and better products for our customers. The 3 warehouses are at the following locations: main warehouse in USA (Florida), China warehouse, and South Korea warehouse.
We combine our total inventory count shown on eBay with the inventory from all 3 warehouses. We supply the eBay items we sell from any of these 3 warehouses. When it ships from our warehouses in China and South Korea to any valid address in the contiguous USA, there is no additional charge to you at all. Nothing extra to pay for freight, customs processing, or duties. Zero.
For shipping from South Korea and China we ONLY use DHL, FedEx, or UPS Air Express Worldwide shipping for fastest delivery. The delivery time from these 2 warehouses is only between 3 to 5 business days depending on your location in the US.
You still get the same parts with OEM-like quality, with warranty based in the USA, and delivered in just a few days directly to your door. You also still get the technical support, and service here in the US from the personnel in our Florida location.
OUR PROMISE:
1- We'll be there when you need us. We are located in the USA, and in your time zone. We are available to provide you with customer service and technical support, before and after sale, from our location in Florida, Monday thru Friday from 8 AM to 7 PM Central time, and Saturdays from 8 AM to 2 PM Central time.
2- We leverage our experience, our longevity in the market, and the close relationships that we have established throughout the years with the best factories around the world, to bring you the best quality parts and components at affordable prices.
3- If you are not sure if this part fits your machine, or if it is the part you need, please give us a call, or send us a message. Consult with us before buying to ensure that you get the right part. We have all the information to help you determine if this is the part you need or not.
4- Returns are accepted only for unused, and un-open merchandise.
5- We are committed to your satisfaction with our products and our service.
6- We EXPORT. We can ship to customers outside the USA by DHL, or by any other shipping method of your preference. We have very good international shipping rates. Please contact us for a freight quote to your country. Hablamos espanol.