This is a promotional postage listing, it can be combined with any other promotional postage items from my listings for a single postage charge.
This only works if you Add items to your basket, then pay....only 1 postage charge will then be applied. Save on postage using this method.
We get parcels into the delivery system as soon as possible, sometimes the same day.
Postage charges include postage, packing and the fee Ebay take!! on the postage Please note delivery dates are ESTIMATED by Ebay not us.
We usually dispatch via Royal Mail Tracked and will message you with details upon dispatch.
We DO NOT send via EVRi
A detailed invoice/receipt will be sent with your order
This listing is for 32 mm METRIC fittings
32 mm is the Outside Diameter of pipe
32 mm is the inside diameter of fittings
These are substantial fittings and will make a good strong joint
Threaded components are BSP parallel thread
unless stated in the description be aware of the fitting combinations
for threaded products
Fitting guide for BSP threads
as detailed in our ebay listings
taper male to taper female YES
taper male to parallel female YES
parallel male to parallel female YES
parallel male to taper female often ok with plastic fittings but generally not advised as
a tapered female is best fitted with a tapered male fitting
use PTFE tape as first choice do not use a solvent based sealer
on plastic fittings. If you need to use a sealer use a silicone sealant specifically
for sealing such as fernox LS-X
do not over tighten as this can stress the fitting especially on tapered threads
for 32 mm dark grey METRIC pressure pipe which is a true 32 mm outside diameter
WILL NOT fit black pond/waste waste pipe, even if it has 32 mm printed on it as
that is the nominal size, actual size being 36 mm true outside diameter.
IMPORTANT please identify your pipe size to make sure you require 32 mm METRIC
size fittings for dark grey pipe known as 'pressure pipe'.
Please make sure you know your pipe size, (un-like imperial pipe) the size marked on METRIC PRESSURE PIPE IS the true pipe outside diameter. For reference and information there is a pipe size chart on this listing.
METRIC Solvent weld fittings for PRESSURE pipe which is usually dark grey, will NOT fit IMPERIAL pressure pipe or WASTE pipe which is usually black, light grey or white. We have inserted our pipe size chart into this listing for information.
Connects 2 pieces of pipe together
Elbow 90°
Elbow 45°. This is a regular strong elbow. Use this if you are tight on space
Elbow 45° heavy duty. This elbow is a little more chunky and hasa thicker wall = 5 mm, Use this for the strongest possible joint
it is the same price as the regular elbow.
Two 45° elbows can be connected together with a small piece of pipe to makea better flow 90° bend.
Tee End cap
Reducer Connector will directly fit 32 mm pipe to smaller pipe (select size)the large end is 40 mm OD so this will go into a 40 mm pressure pipe fitting (not waste fitting)
instead of the 32 mm pipe...so versatile
This is a solvent weld adapter piece, made by us from PVC Pipe  adapter fits INTO 32 mm pressure pipe fittings and INTO some makes of 36 mm waste pipe or into the 36 mm bush supplied. approx 65 mm long. NOT suitable for use with Tetrafow waste pipe.  adapter shown fitted into a piece of waste pipe32 mm true outside diameter one end, which fits INTO pressure pipe fittings. The other end is machined to approx 31.8 mm so that it fits INTO some makes of 36 mm waste pipe or the sleeve supplied. Bore sizes of 36 mm pipe may vary from make to make. If the adapter will not fit into your pipe use it with the bush supplied and connect up using a 36 mm fitting (available from our 36 mm waste pipe listing) . |
Reducing Bush does a similar job as the reducing connector but the outside diameter of the bush is the same as the pipe size so a 32 mm to 25 mm bush takes a 25 mm pipe and then
goes INTO a 32 mm fitting.
Threaded bush, solvent welds into a 32 mm fitting to convert it to a 3/4" BSPthread
Screw together union (heavy duty) allows for easy removal of pipe or equipment
solvent weld the pipe into unions then screw together.
Diameter = 74 mm, Length = 69 mm, Weight = 152 g
use this Heavy Duty version for the strongest fitment
Screw together union (compact version) allows for easy removal of pipe or equipment solvent weld the pipe into the unions then screw together.
Diameter = 61 mm, Length = 58 mm, weight = 95 g
use this if you are tight on space
Solvent weld then screw together union ADAPTER 32 mm true OD metric pipe to 33.6 mm (1" imperial) pipe pipe. Ideal for converting 1" (33.6 mm) imperial pipe to the more popular 32 mm metric pipe. 1" pipe (33.6 mm OD) fits in one end and 32 mm true OD metric pipe fits in the other end. A screw union allows easy fitting or removal of pipe without pulling apart.
Tank flange. This is a heavy duty flange complete with back nut and 2 substantial rubberseal washers. Takes 32 mm pressure pipe and has 40 mm spigot outside diameter which will go into a 40 mm
pressure pipe fitting (not waste pipe size) instead of the pipe. Requires a 42 mm hole. 32 mm Pipe can be fitted to both ends.
Backing nut CAN BE tightened or unscrewed with pipes in place
Tank, bulkhead connector with female socket ends. Pipe can be fitted to both ends.requires a 32 mm tank hole. The back nut is also the socket making this a compact fitting. Be aware that
if pipe is glued to both ends fitting cannot then be removed or tightened without rotating the pipe.
As with all good pipework practice add a removable screw union to the end with a short piece of pipe for
easy assembly and removal. Bore through fitting = 24 mm. Max tank wall thickness = 18 mm.
Supplied with 2 silicone seal washers. This item does not have a pressure rating
Tank, bulkhead connector, now supplied WITH a straight connector fitting
This connector is made from a piece of pipe with a 1" BSP thread on
one end, the other end being the same as 32 mm pipe so that it takes
a 32 mm fitting. Pipe does not fit directly into this tank connector
it requires a fitting.
Please note pipe can be fitted to one end only....not both ends
Male adapter with BSP parallel thread one end and 32 mm solvent weld socketon the other end, great for screwing into pumps, uv's, threaded valves etc.
use PTFE tape not sealer. Takes 32 mm OD pipe and is available with a 3/4", 1" or 1.25"
male BSP parallel end. The OD of the socket is 40 mm so it WILL fit INTO a 40 mm pressure pipe
fitting (NOT waste pipe) instead of the 32 mm pipe.......so versatile!!
Other threaded fittings available please see our listing for threaded fittings
in our Ebay shop
1" BSP both ends male to male
1" BSP both ends female to female
1" BSP plug...screws INTO a 1" BSP female fitting
1" BSP cap...screws ONTO a 1" BSP male fitting
1" BSP to 3/4" BSP threaded bush
Use PTFE tape on threaded fittings12 Meter roll x 12 mm wide x .075 mm thickness
suitable for water NOT gas.
Female adapter with BSP parallel thread one end and 32 mm solvent weld socket
end for 32 mm pipe. Style of fitting may vary depending on thread
size.
32 mm Tail. Hose tail pushes into 32 mm bore flexy hose/pipe. Has a 32 mm solvent weldspigot end which goes INTO a fitting, does not fit inside pipe.
25 mm Tail. Hose tail pushes into 25 mm bore flexy hose/pipe. Has a 25 mm solvent weld spigot and is supplied with a 25 mm to 32 mm bush to make the spigot end 32 mm so that it can be solvent glued INTO a 32 mm fitting, does not fit directly into the end of a pipe.
Hose tail pushes into a 32 mm bore flexy hose/pipe.Has a 1" BSP (approx thread OD = 33 mm) end
More tails available in PP (polypropylene) see Hosetails in our Ebay shop
Pipe kit comprises of 3 pieces of pipe and 2 straight solvent weld connectors.when connected will make a pipe approx 1.28 meters long
Plastic clip for 32 mm OD pipe. Very strong with a firm grip on the pipe. Holds pipe approx 21 mm off the mounting surface. Supplied in packs of 2 or 5
P clip made from steel with a rubber grip ring. This is a strong clip used to clamparound pipe for retaining to wall etc. Provides strong support, resilience and prevents pipe work from sagging. Available in zinc plated steel or stainless steel for marine or more aggressive environments!
Pack of 10 fixing screws, with wall plugs, for P clips. Use with plugs for wall fixing or use screwsonly for fitting to wood etc. Screw size 4 mm pozi drive head x 30 mm long A2 STAINLESS steel
pipe x 425 mm long 
pipe short piece 100 mm longPipe 425 mm long or short 100 mm long ideal for connecting up.
all pipe is supplied neatly cut and prepared, ends smoothed and cleaned
inside and outside ready for use...sometimes a short piece of pipe is all you need
solvent weld Ball valve. Also available with BSP Taper threaded endsplease see threaded valves in our Ebay shop listings.
solvent weld Ball valve with unions allows easy removal from pipe work.
Fittings are strong and rated to AT LEAST PN10 or 9 bar = approx 145 PSI unless stated in the description. You are unlikely
to get to even 1 bar on a pond system.
This is a promotional postage listing, it can be combined with any other promotional postage items from my listings for a single postage charge.
Add items to your basket, then pay....only 1 postage charge will then be applied.
We get parcels into the delivery system as soon as possible, sometimes the same day.
Postage charges include postage, packing and the fee Ebay take!! on the postage Please note delivery dates are ESTIMATED by Ebay not us.
We usually dispatch via Royal Mail Tracked and will message you with details upon dispatch.
We DO NOT send via EVRi
A detailed invoice/receipt will be sent with your order
Please take a look at our other listings for valves, pipes, fittings....add us to your list of suppliers
so you can easily find Pondaqua whenever you get the urge to buy some pond fittings.
click save this seller
click see other items
Pondaqua is a registered trade name