New 

Set of 3 - Pocket Clip Screws - in Matte Black Power Coated

Size: 2-56 X .170" (2-56 is thread size / .170" is thread length) - 

Drive: T6 Torx (6-lobe /Star)

Material: Stainless Steel - SS302

These are very hard to find, replacement pocket clip screws for (some) USA made folding knife (Benchmade, Spyderco, Kershaw, ZT etc). These are short, only .170” thread Length. Your factory clip averages about .040” thick, so there will be about .130” thread reach into the handle. Please double check before buying. We do our best describe but you need to verify before buying.

Important Notes:

1. Will not fit knife with G10 or Nylon handle. Unless the thread is tapped directly in handle material.

2. Most likely will work with knife that has Aluminum, Carbon Fiber or Titanium handle, when the thread is tap directly into handle material.

3. For Tip Down Mount, other than concerning about screws too short won’t reach thread, you must consider if too long? If screws are too long for tip down, it will lock the blade. But you can easily correct this by grind stone the screws shorter.

4. Screw Heads will be powder coated matte black. Not the entire screw + thread all black. Only about half the screw thread will be black. Reason because powder coating we hang each screw by the shank underneath head with steel wire, spray black powder at the head, so only the head will be black and sometimes powder will adhere to thread. See photos. Therefore it’s random. But the screw head will definitely be black.

If you have questions, please ask before buying. Please view print (dimension in mm) and check length before purchase. Screws will NOT fit all knives. Please remove existing screw from your knife and check. All sales are final. IF YOU ARE NOT SURE IF SCREWS FITS YOUR KNIFE, CONTACT US WITH MODEL? WE CAN HELP CHECK. DON'T BUY JUST TO TRY IF FIT, THEN FILE CLAIM FOR NOT FITTING. 

PN#BLK170(3)