DESCRIPTION

Universal E-Paper Driver HAT, Supports Various Waveshare SPI E-Paper Raw Panels
Universal E-Paper Driver HAT

Supports controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32

Can Be Used To Drive Various SPI Interface E-Paper From Waveshare

Features At A Glance
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
OPERATING VOLTAGE3.3V/5V
INTERFACE3-wire SPI, 4-wire SPI
OUTLINE DIMENSIONS65.0 × 30.2mm
MOUNTING HOLE SIZE3.0mm

Comes With Adapter Board And FFC Cable

Expanding Display Interface Via FFC Cable, For Easy Connecting To The E-Paper

Compatible With Multiple E-Paper Models And Various Motherboards

Connecting with 5.83inch e-Paper

 

Connecting with Raspberry Pi Zero
and 5.83inch e-Paper (B)

 

Connecting with Raspberry Pi Zero
and 7.5inch e-Paper

 

Connecting with Raspberry Pi 4B
and 7.5inch e-Paper (B)

for reference only, the Raspberry Pi boards and e-paper screens are NOT included



Onboard SPI Control Interface

For Use With Other Controller Boards Like Raspberry Pi/Jetson Nano/STM32/Arduino

VCC3.3V/5V
GNDGround
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData / Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output
PWRPower on/off control

Product Show

for reference only, the e-paper screen is NOT included


Outline Dimensions
Resources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Supported e-Paper

PART NUMBERCOLORSGRAY SCALERESOLUTIONDISPLAY SIZE (MM)OUTLINE DIMENSION (MM)FULL REFRESH TIME* (S)PARTIAL REFRESHINTERFACE
1.54inch e-Paperblack, white2200x20027.60 × 27.6031.8 × 37.32√SPI
1.54inch e-Paper (B)red, black, white2200x20027.60 × 27.6031.8 × 37.38×SPI
2.13inch e-Paperblack, white2250x12248.55 × 23.7059.2 × 29.22√SPI
2.13inch e-Paper (B)red, black, white2212x10448.55 × 23.7059.2 × 29.215×SPI
2.13inch e-Paper (D)black, white2212x10448.55 × 23.7059.2 × 29.22√SPI
2.66inch e-Paperblack, white2296×15230.704 × 60.08836.304 × 71.8206√SPI
2.66inch e-Paper (B)red, black, white2296×15230.704 × 60.08836.304 × 71.82015×SPI
2.7inch e-Paperblack, white4264x17657.29 × 38.1970.4 × 45.86×SPI
2.7inch e-Paper (B)red, black, white2264x17657.29 × 38.1970.4 × 45.815×SPI
2.9inch e-Paperblack, white2296x12866.89 × 29.0579.0 × 36.72√SPI
2.9inch e-Paper (B)red, black, white2296x12866.89 × 29.0579.0 × 36.715×SPI
2.9inch e-Paper (D)black, white2296x12866.90 × 29.0679.0 × 36.72√SPI
3.52inch e-Paperblack, white2360×24074.51 × 49.6784.70 × 54.411.5×SPI
3.7inch e-Paperblack, white4480×28047.32 × 81.1254.90 × 93.303√SPI
4.01inch e-Paper (F)7-Color2640×40086.40 × 54.0096.80 × 68.7030×SPI
4.2inch e-Paperblack, white4400x30084.80 × 63.6090.1 × 77.05×SPI
4.2inch e-Paper (B)red, black, white2400x30084.80 × 63.6090.1 × 77.015×SPI
4.26inch e-Paperblack, white4800 × 48092.80 × 55.68129.33 × 62.374√SPI
5.65inch e-Paper (F)7-Color2600×448114.9 × 85.8125.4 × 99.5<35×SPI
5.83inch e-Paperblack, white2600x448118.80 × 88.26125.4 × 99.55×SPI
5.83inch e-Paper (B)red, black, white2600x448118.80 × 88.26125.4 × 99.520×SPI
7.5inch e-Paperblack, white2800×480163.20 × 97.92170.2 × 111.25×SPI
7.5inch e-Paper (B)red, black, white2800×480163.20 × 97.92170.2 × 111.226×SPI
7.5inch e-Paper (G)black, white2800×480163.20 × 97.92177.20 × 118.205×SPI
13.3inch e-Paper (K)black, white2960×680175.52 × 195.16286.32 × 212.265×SPI

* Full Refresh Time: local refreshing time without network transmission, if refreshing through network connection, it usually take 1-5 minutes, depending on the network type, connection quality, image size, and so on.

e-Paper raw panels comparing

PACKAGE CONTENT

Weight: 0.021 kg

Note: e-Paper and Raspberry Pi are NOT included.

  1. e-Paper Driver HAT x1
  2. RPi screws pack (2pcs) x1
  3. GH1.25 9PIN cable ~20cm x1
1
2
3