Advantages of OptiLight Windows

 High quality wood  

Wooden elements of the OptiLight windows are made from especially sorted, highest quality pinewood which is bonded in layers, impregnated, and coated with an ecological acrylic finish. The wood is protected on the outer surface with weather and UV resistant aluminium profiles.

 Thermally insulated glazing unit 

The window has a large effective glazing area, which allows more light to enter the room. All windows are double glazed, and use a single chambered construction. The U coefficient of the pane is 1.1 [W/m.K]. Space between panes is filled with inert gas. The internal pane is coated with a heat reflecting low-emission layer, external glass toughened. It helps to reduce heat loss during winter and overheating during summer.

  The convenience of use

OptiLight windows have a centre-pivoting construction. The hinges installed in the middle of the window allow the sash to be opened in a range of positions and to be rotated up to 180 degrees. The handle design enables tight closing and two positions of micro ventilation. The handle positioned at the bottom of the sash makes using the window easier and more comfortable, irrespective of the height at which the window is installed. Pivot structure and functional handle placed in the bottom part of the sash ensures comfortable use and operation.

 The wide range of applications 

Thanks to the construction of windows and flashings OptiLight windows can be installed on roofs at any pitch between 15 to 90 degrees.

PLEASE NOTE:

Flashing kit is important part of window installation and contains some external elements of the window which are must to fit the window. If you don't have a flashing kit from previous project you must buy flashing kit.

Flashing kits available:

 TZ tile flashing 

Suitable for profiled roofing materials up to 45 mm thick such as: tile, corrugated sheet metal

 TL slate flashing 

Suitable for flat roofing materials up to 5mm thick such as: slate and shingles