Set of Presser feet for Low Shank Sewing  Machines

OFFERED FOR YOUR CONSIDERATION  1 (ONE) NEW Set of 14 presser feet (Low shank with trigger included). Great quality! All you ever need for you sewing projects!

Please NOTE: this set does not come with any user instructions

Listed by numbers marked on the listing pictures:

1. Quilting guide

2. Button sew-on foot  (clear/blue plastic)

3. Cording foot

4. Low shank snap on bracket (we recommend to replace your original shank with this one for a better fit)

5. General purpose zig-zag foot

6. Sliding buttonhole foot

7. 5 grooves pintuck foot

8. zipper foot (may come in narrow style-, depends on distributors availability)

9. Roller foot

10. Invisible zipper foot (plastic)

11. Straight stitch / 1/4" foot Quilting  foot

12. Overcast foot

13. Blind hem / edgestitch foot

14. 1/8" narrow hemmer foot/rolled hem

 Basic Steps to Replace a Presser Foot Holder and Snap-On Presser Feet

1. Turn the sewing machine off.

2. Raise the presser foot bar to its highest position.

3. Attach the presser foot holder to the presser bar and screw down to hold into place.

4. Lift the presser foot release lever and lower the presser bar down onto the snap-On presser foot sole. The presser foot will snap on into place when the       presser bar release lever is moved down.

5. To remove a Snap-On presser foot, raise the presser bar again  (Lift the presser foot lever). Press a trigger on the back of the shank, which will relies the foot. Remove and replace with another one, using step 4.

 *    *    *

Compatible to All Low Shank Riccar Models , including:

1010, 1570, 1900, 1925, 1934, 200, 2050 * 2400, 250 * 2600 * 2800 * 2900 * 2910 * 2925 * 2950 * Galaxy 300 * 315FA * 315SU *  3300 * 333 * 3400 * 3500 * 3600 * 368 *400FA * 4001 * 4003 * 404 * 410 * 414 * 469FA * 500 * 505 *  510 * 515 * 525 * 53741 * 550 * 551 * 555FA * 555SU *  551 * 555 * 570 * 572 * 580 * 581 * 5900 * 591 * 600 * 6000 * 601 * 606 * 608 * 610 * 650 * 666FA * 666SU * 695 * 6950 * 705 * 706 * 707 *  750 * 7500 *  7610 * 777 * 800R * 805 * 806 *807 * 808E *  8400 * 8500 *  888 * 900 * 906E *  9150 * 9160 * 925 * 950 * 9400 * 9600 * 9700 * 9800 * 9900

 R104 * R1100 * R1500 * R1570 * R1800 * R1850 * R1926 * R1950 * R2050 * R250 * R3100 * R3200 * FA469 * R551 * R552 * RM570 * RE570 * RE571 * R572 * RE581 / RE591 * RE640 * R650 * R651 * R700 * R750 * R751 * R7620 *  FA762 * R916 *  R918 * R950 *  REC5900 * REC6000 * SUPER STRETCH * RM540 * RM570 * RS76 * RS77 * RS78 * RS98 * RZ206B * RZ208B * RZ210B * S02 * SZ702

*   *   *   *   *

We do rely in most of the cases on information provided by our distributors, who happens to make a mistakes once in a while. Please confirm your machine SHANK with the chart measurements.  If you think your machine is a Low  Shank but your model is not listed, it means we did not have any info on it, but as long as it is a Low--it should work.

I guarantee your package will arrive or I will reship it at my cost. The only exception is if your delivery confirmation shows--it is delivered. In this case, USPS probably made a wrong delivery and I cannot be held responsible for that. Please contact your local Postal office and they would be able to check delivery location by GPS.