The Fisher FIELDVUE DLC3010 is a digital level controller designed to measure liquid level, interface level (the boundary between two liquids), or density. It combines a robust electronic transmitter with a displacement-style sensor, typically replacing older pneumatic or analog electronic instruments.

⚙️ Operating Principle

The DLC3010 operates in conjunction with a displacer-style sensor, such as the Fisher 249 series.
• As the liquid level, interface level, or density changes, the buoyant force on the displacer changes.
• This force change causes a small rotation of a torque tube assembly.
• The DLC3010 measures this rotation using a non-contact, hall-effect sensor.
• The electronics convert this physical rotation into a precise electrical signal.

📈 Technical Specifications

• Output Signal: 4 to 20 mA DC analog current output with digital HART communication protocol.
• Power Supply: Loop-powered, requiring a minimum of 12 VDC to a maximum of 30 VDC.
• Accuracy: Independent linearity is within ±0.25% of the full-scale output.
• Operating Temperature: Ambient temperature ranges from -40°C to 80°C (-40°F to 176°F). Process temperatures can exceed 400°C (750°F) depending on the displacer and extension type used.
• Housing: Die-cast aluminum with low copper content, rated NEMA 4X and IP66 for harsh environments.
• Hazardous Area Approvals: Explosion-proof, intrinsically safe, and non-incendive certifications from major global agencies (ATEX, IECEx, FM, CSA).

🛠️ Calibration & Diagnostics

• Configuration Options: The device can be configured and calibrated using a built-in Liquid Crystal Display (LCD) and local pushbuttons, or remotely via a HART Field Communicator or asset management software.
• Dry Calibration: Allows for complete setup and calibration without the need to fill the process vessel with liquid, calculating parameters based on torque tube and fluid properties.
• Advanced Diagnostics: Built-in alerts detect sensor errors, temperature extremes, electronic failures, and supply voltage drops to predict maintenance needs before a failure occurs.