This is an antique Seth Thomas clock dial with bezel. This dial has been replaced with a historically correct dial. The glass is flat. The following measurements were taken “Center to Center”
Distance between 2 winding holes is 3 1/8".
Distance between winding hole and center is 2".
Distance between center and fast/slow adjustment is 3/4".
The overall diameter is 5 11/16".
Please ask any questions before bidding. Shipping to U.S. only. Thanks! And please see my other auctions.Please Note; These dials are close to a century old if not older. Many have been altered or damaged over the years. I make repairs as needed. I use the original glass if possible and replace with correct flat or convex glass as was originally used in that particular dial. Some of my dials have small dents or flaws from when they were made or have been damaged at some time over the years. Some glass may have scratches or chips. Some brass may be discolored. Please look closely at photos.
Outer diameter is the measurement of the dial plate that mates with the clock and not the diameter of the outer glass bezel. The overall outer glass bezel may be slightly larger on some dials.
Measurements are given center of hole to center of hole (“center to center”).
I want you to be happy with your dial. If you have any problems with a purchased dial, let me know. I will be happy to take it back and help you find the correct dial needed. Some of these dials are interchangeable and many are not. If you are unsure, send me a photo of your clock and/or old dial and I will try to help you find the correct dial.
x#3