Servo Parameter:
Weight: 55g
Size: 45.2X24.7X35mm
Gear: metal gear
Motor: core motor
Gear ratio: 1/345
Horn type: 25T/OD5.9mm
Connector and cable: 15cm with 5264-3p
Operating temperature: -20℃～60℃
Angle senor: 12Bits magnetic coding
Opearing voltage: 6-14V
No load speed: 0.22s/60°/12V
No load current: 200mA
Stall torque: 30kg.cm/12V
Stall current: 2.7A
Idle current: 30mA
Kt constant: 10kg.cm/A
Running angle: 360°（0-4096）
Neutral position: 180°(2048)
Electronic protection: Over hot/voltage/current/load protection
Feedback: Load/ position/ voltage/ current/ speed/ temperature feedback
Package included:
6 x 30kg Servo with accessories
12pcs 30KG STS3215 Smart Servo 12V TTL Serial Bus Servo for SO-ARM100 Robotic Arm
Specification:
FEETECH 12V 30KG.CM Plastic Case Metal Gear Magnetic Encoder Double shaft TTL Serial Bus Servo
Servo Parameter:
Weight: 55g
Size: 45.2X24.7X35mm
Gear: metal gear
Motor: core motor
Gear ratio: 1/345
Horn type: 25T/OD5.9mm
Connector and cable: 15cm with 5264-3p
Operating temperature: -20℃～60℃
Angle senor: 12Bits magnetic coding
Opearing voltage: 6-14V
No load speed: 0.22s/60°/12V
No load current: 200mA
Stall torque: 30kg.cm/12V
Stall current: 2.7A
Idle current: 30mA
Kt constant: 10kg.cm/A
Running angle: 360°（0-4096）
Neutral position: 180°(2048)
Electronic protection: Over hot/voltage/current/load protection
Feedback: Load/ position/ voltage/ current/ speed/ temperature feedback
Electronic control Function:
1.Acceleration start stop function: speed and acceleration value can be set, motion effect is more gentle.
2.High precision, 360 degree absolute position 4096 bit precision, the highest position resolution is 0.088 degrees, if the control is 90 degrees, input 4096 / 360 * 90 = 1024, if the control is 180 degrees, input 4096 / 360 * 180 = 2048, so as to calculate.
3.There are four working mode switching (mode 0 position servo, mode 1 speed closed-loop, mode 2 speed open-loop, mode 3 step servo).
1),Mode 0:Location mode, the default mode. In this mode, 360 degree absolute angle control can be realized. Support acceleration movement.
2),Mode 1:Speed closed-loop, in the programming interface, the operation mode is set to 1, switch to speed closed-loop mode, and enter the corresponding speed in the speed column to run.
3),Mode 2:Speed open-loop, in the programming interface, the operation mode is set to 2, switch to speed open-loop mode, and enter the corresponding time in the time column to run.
4),Mode3:Step mode: in the programming interface, the maximum / minimum angle limit is set to 0, and the operation mode is set to 3. Switch to step mode. Enter the position in the position bar to step towards the target position. Click the position again to continue to step in the same direction.
4,Multi turn mode, 360 degree absolute control and feedback, under the highest accuracy, the absolute position control can be plus or minus 7 turns, but the number of power cycles is not saved, only the absolute position feedback value is retained.
5,One key calibration, 360 degree angle installation at any position, (40 (decimal) address input 128 (decimal)) one key correction current position is the middle (2048 (decimal)).
6,TTL communication level, half duplex asynchronous communication, bus protocol support to adjust read and write parameters, and add synchronous read function (send an instruction to receive the read back instruction from each servo on the bus in turn.)
7,Multiple protections, (overload, overcurrent, overvoltage, overheating, switch setting, condition parameter changing)
1),Overload protection: through position detection, during the movement from the starting position to the target position, when the current position is detected to be not the target position after encountering the blocking of obstacles, the unloading force lasts for 2S (20% of the default blocking force). Until a new command is triggered, Release protection
2),Overcurrent protection: through the set current value, check whether the current reaches the set current value. When it reaches the set current value, release the force (the default torque is 0). Until a new command is triggered, Release protection
3),Over voltage protection: detect the current voltage value. If it exceeds the set voltage value, the alarm will display over-voltage.
4),Overheat protection: detect the current motor temperature. If the temperature exceeds the set value, the alarm will display overheat.
8:Multiple feedback:
1)Load feedback: the current control output drives the voltage duty cycle of the motor, and the full scale is 1000 = 100% torque output.
2)Current feedback: The servo working current, 1 = 6.5mA
3)Voltage feedback: The servo working voltage,70=7V,0.1V
4)Temperature feedback: internal working temperature of current servo(measuring temperature).
5)Speed feedback: feedback the speed of current motor rotation, and the number of steps in unit time (per second)
9,Open PID parameters.
1.Acceleration start stop function: speed and acceleration value can be set, motion effect is more gentle.
2.High precision, 360 degree absolute position 4096 bit precision, the highest position resolution is 0.088 degrees, if the control is 90 degrees, input 4096 / 360 * 90 = 1024, if the control is 180 degrees, input 4096 / 360 * 180 = 2048, so as to calculate.
3.There are four working mode switching (mode 0 position servo, mode 1 speed closed-loop, mode 2 speed open-loop, mode 3 step servo).
1),Mode 0:Location mode, the default mode. In this mode, 360 degree absolute angle control can be realized. Support acceleration movement.
2),Mode 1:Speed closed-loop, in the programming interface, the operation mode is set to 1, switch to speed closed-loop mode, and enter the corresponding speed in the speed column to run.
3),Mode 2:Speed open-loop, in the programming interface, the operation mode is set to 2, switch to speed open-loop mode, and enter the corresponding time in the time column to run.
4),Mode3:Step mode: in the programming interface, the maximum / minimum angle limit is set to 0, and the operation mode is set to 3. Switch to step mode. Enter the position in the position bar to step towards the target position. Click the position again to continue to step in the same direction.
4,Multi turn mode, 360 degree absolute control and feedback, under the highest accuracy, the absolute position control can be plus or minus 7 turns, but the number of power cycles is not saved, only the absolute position feedback value is retained.
5,One key calibration, 360 degree angle installation at any position, (40 (decimal) address input 128 (decimal)) one key correction current position is the middle (2048 (decimal)).
6,TTL communication level, half duplex asynchronous communication, bus protocol support to adjust read and write parameters, and add synchronous read function (send an instruction to receive the read back instruction from each servo on the bus in turn.)
7,Multiple protections, (overload, overcurrent, overvoltage, overheating, switch setting, condition parameter changing)
1),Overload protection: through position detection, during the movement from the starting position to the target position, when the current position is detected to be not the target position after encountering the blocking of obstacles, the unloading force lasts for 2S (20% of the default blocking force). Until a new command is triggered, Release protection
2),Overcurrent protection: through the set current value, check whether the current reaches the set current value. When it reaches the set current value, release the force (the default torque is 0). Until a new command is triggered, Release protection
3),Over voltage protection: detect the current voltage value. If it exceeds the set voltage value, the alarm will display over-voltage.
4),Overheat protection: detect the current motor temperature. If the temperature exceeds the set value, the alarm will display overheat.
8:Multiple feedback:
1)Load feedback: the current control output drives the voltage duty cycle of the motor, and the full scale is 1000 = 100% torque output.
2)Current feedback: The servo working current, 1 = 6.5mA
3)Voltage feedback: The servo working voltage,70=7V,0.1V
4)Temperature feedback: internal working temperature of current servo(measuring temperature).
5)Speed feedback: feedback the speed of current motor rotation, and the number of steps in unit time (per second)
9,Open PID parameters.
Package included:
12 x 30kg Servo with accessories
Please kindly make payment asap, so that we can arrange your order promtly.
If you have any problem with payment, please feel free to contact us.
We provide tracking number for ALL orders. You can track your parcels.
Normally it arrives in 10-15 business days to US and European countries.
DHL /Fedex/UPS arrives in 7-8 business days.
1.All products are eligible for 30-days money back guarantee.
2.All returns should be guided by us. Please contact us for details before you return anything.
- Please don't hasitate to contact us BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- We accept dropshipping, bulk orders and customized products.
- We are selling forArduino module, sensors, Nextion display and other oled or lcd screens. lidar range finder sensors, servo motors, various electronic components and for legoled, ect.
| Brand | WishIot |
|---|---|
| MPN | Does not apply |
| Country/Region of Manufacture | China |
| Model | FZ7059-360 |
| Shipping | Free shipping with full tracking information |
| Type | 30kg Servo |
| Compatible Scale | / |
| Color | Black |
