An independently manufactured aftermarket intake resonator delete pipe designed for compatible early Subaru Impreza WRX and WRX STI turbocharged EJ20 intake configurations.
This component is intended to replace the corresponding factory intake resonator chamber with a connecting pipe, retaining the applicable original-style intake routing.
Designed for selected GC8 / GF8 Version 1 and Version 2 applications equipped with the matching top-feed turbo EJ20 intake arrangement.
This pipe is intended for vehicles with the corresponding stock-style intake resonator arrangement.
It is not a universal intake pipe for every EJ20 engine or every Subaru WRX / STI generation.
Please compare your existing resonator, connection diameters, hose routing and listing photos before ordering.
Intended applications:
Approximate production period: 1993–1996, depending on version and market.
Engine application: Selected turbocharged EJ20 intake systems with the corresponding top-feed layout.
Early Subaru intake configurations can vary by production period, engine version, market and previous modifications.
Please verify the shape of the original resonator and all connection points before purchasing.
Compatibility with later WRX / STI generations, other EJ20 configurations or modified aftermarket intake systems has not been confirmed.
Resonator Chamber Replacement
The pipe is designed to occupy the corresponding intake resonator connection area in compatible vehicles.
Stock-Style Intake Connections
The ends are designed around the applicable original intake connection dimensions and routing.
Integrated Vacuum / PCV Connection Port
The pipe incorporates a connection port intended for the corresponding vacuum or crankcase ventilation hose arrangement.
The pipe is a mechanical intake component only. It does not replace sensors, engine management electronics or other required intake equipment.
The resonator delete design changes the corresponding intake passage by replacing the original resonator chamber with a connecting pipe.
Actual airflow characteristics and engine behavior depend on the vehicle's complete intake system, tuning, engine condition and installation.
Locate the existing intake resonator chamber in the compatible vehicle's intake system.
Remove the original resonator and disconnect the applicable hoses and mounting connections as required.
Compare the replacement pipe with the existing intake connection points before installation.
Position the pipe in the corresponding intake location and connect it using suitable existing or separately sourced hardware.
Connect the applicable vacuum / PCV hose to the integrated port where compatible.
Ensure that all intake connections are properly secured and sealed.
Verify clearance around engine components, wiring, moving parts and sources of excessive heat.
Do not leave required vacuum or crankcase ventilation connections open.
Professional installation is recommended if you are unfamiliar with turbocharged engine intake systems.
The installer is responsible for ensuring that the modified intake system complies with applicable emissions and road-use requirements.
The intake pipe is manufactured using FDM 3D printing from ASA plastic.
ASA provides good heat and UV resistance for suitable automotive applications.
Visible layer lines, minor support marks, slight surface texture and small cosmetic variations are normal characteristics of the 3D-printing process.
These cosmetic characteristics do not normally affect the intended function of the part.
The material must not be exposed to temperatures beyond the operating limits of the finished component.
Do not install the pipe in direct contact with exhaust components or other excessive heat sources.
This is a physical 3D-printed aftermarket component, not an original manufacturer part or digital download.
1 × Resonator Delete Intake Pipe with Integrated Vacuum / PCV Port – ASA Plastic
Intake hoses, clamps, air filters, vacuum hoses, sensors, mounting hardware and other vehicle components shown in photos are not included unless specifically stated.
📦 Dispatch: 1–3 working days
📍 Ships from: Cyprus via Cyprus Post
🔎 Tracking: Tracking number provided for every shipment
⏱ Estimated transit time: approximately 10–21 days
Delivery times may vary depending on destination, local postal services and customs processing.
Orders shipped to customers in the United States are sent using DDP (Delivered Duty Paid) shipping.
Applicable import duties are covered in advance.
This is an independently manufactured aftermarket intake component and is not an original Subaru product.
Subaru, Impreza, WRX, STI, GC8, GF8 and EJ20 are used only to identify intended vehicle and engine compatibility.
This product is not manufactured, sponsored, endorsed or affiliated with Subaru Corporation or its respective trademark owners.