|
|
|
|
|
|
|
|
|
|
Fits Applications
For Dodge Journey 2.4L 2019-2020
Single Row Connector
Throttle Body the usual parts
Throttle position sensor
Flange
Butterfly valve
Throttle control valve
Accelerator pedal position sensor
The mechanic will replace the throttle body on your car if:
It can’t be cleaned properly.
The throttle flap, throttle shaft, or the mechanical linkages to the throttle cable are damaged.
The electronic throttle actuator is faulty.
There is a damaged throttle body or TP sensor electrical connector.
Additionally, it’d be a good idea to get your cars throttle and fuel delivery system inspected for:
A faulty throttle position sensor
Gas pedal sensor problems
Intake manifold pressure sensor issues
A clogged air filter
A bad Mass Airflow sensor (MAF sensor)
A failing fuel pump
A malfunctioning fuel injector
A defective fuel pressure regulator
These parts can cause problems similar to bad throttle body symptoms.
How is Throttle Body Replacement Done?
You will need: screwdrivers, socket set, spanners, needle pointed pliers.
Throttle Body Replacement
(1) Refer to the service manual for identification and location of the throttle body.
(2) Remove the air intake duct from the throttle body once it is located.
(3) Check the throttle body as well as the assembly and ports. If there is wearing in the assembly it may also require replacement.
(4) Pull out the cables from the throttle body.
(5) Remove the hoses such as air or vacuum hoses from the throttle body.
(6) Disconnect the throttle position sensor.
(7) Remove the screws that are holding the throttle body in the assembly.
(8) Remove the throttle body carefully after disconnecting everything.
(9) Properly clean the assembly and port to remove any carbon build up.
(10) Compare the old throttle body with the new one.
(11) Install the throttle body in the port.
(12) Fasten the bolts and screws to hold it in place.
(13) Connect all the things that you previously removed.
(14) After connecting everything start your engine and test for the new throttle body.
(15) Perform the following check as a final test. Start the engine and take the car for a test drive. On your return, let the engine idle for about two minutes and listen for problems in the idle, ensuring that it is smooth. If it is not, then there may be additional problems throughout your engine.
Q: What is throttle body relearn?
Idle Relearn (aka throttle body relearn) is the procedure that is required to obtain the correct idle speed after replacing electronic throttle body, disconnecting a battery cable, clearing a check engine light, etc. The symptoms are, idle is too low, too high, or erratic. Sometimes the engine stalls when you stop at the traffic light. And you may see the check engine light come on with the idle speed related trouble codes.
Q: Why does Idle Relearn need?
Many newer vehicles use an electronic throttle body which contains a throttle plate, motor, and sensors. They are responsible for regulating all air flow into the engine, including the air flow for maintaining idle speed. When idling, the vehicles computer sends a signal to the throttle body and controls the throttle plate to adjust the idle speed depending on the engine temperature and whether AC is on or off. When the computer loses the connection to the throttle body, it loses the position of the throttle plate. Thus, the vehicle computer needs to relearn the throttle plate after losing connection to it.
Q: When is Idle Relearn required?
As mentioned above, Idle Relearn is required when the vehicle computer loses the connection to a throttle body. And, many things cause it to happen.
Disconnecting a battery cable
A battery dies
Replacing a battery
Clearing the check engine light
Replace an electronic throttle body
Cleaning an electronic throttle body in an inappropriate way
etc…
Note: Please note that it doesn’t mean that you will need the idle relearn after these repairs or incidents. It totally depends on models of vehicles.
Q: Does my car need Idle Relearn?
In general, the procedure of idle relearn is necessary on vehicles with electronic throttle body (=ETB aka DBW Drive-By-Wire).
If you are experiencing a rough idle on your vehicle after you disconnect a battery for any reasons, you need to perform the idle relearn procedure.
Q: How can you get the procedure of idle relearn?
Unfortunately, not all repair manuals have the information about idle relearn. And you may or may not find it in the owner’s manuals. So where can you find it? Go online, search “idle relearn + make, model, and year of your vehicle,” and you may get results. If not, search “idle relearn + make” only. The procedure may be the same among all vehicles from the same manufacturer.
Fits Applications
For Dodge Journey 2.4L 2019-2020
Single Row Connector
Throttle Body the usual parts
Throttle position sensor
Flange
Butterfly valve
Throttle control valve
Accelerator pedal position sensor
The mechanic will replace the throttle body on your car if:
It can’t be cleaned properly.
The throttle flap, throttle shaft, or the mechanical linkages to the throttle cable are damaged.
The electronic throttle actuator is faulty.
There is a damaged throttle body or TP sensor electrical connector.
Additionally, it’d be a good idea to get your cars throttle and fuel delivery system inspected for:
A faulty throttle position sensor
Gas pedal sensor problems
Intake manifold pressure sensor issues
A clogged air filter
A bad Mass Airflow sensor (MAF sensor)
A failing fuel pump
A malfunctioning fuel injector
A defective fuel pressure regulator
These parts can cause problems similar to bad throttle body symptoms.
How is Throttle Body Replacement Done?
You will need: screwdrivers, socket set, spanners, needle pointed pliers.
Throttle Body Replacement
(1) Refer to the service manual for identification and location of the throttle body.
(2) Remove the air intake duct from the throttle body once it is located.
(3) Check the throttle body as well as the assembly and ports. If there is wearing in the assembly it may also require replacement.
(4) Pull out the cables from the throttle body.
(5) Remove the hoses such as air or vacuum hoses from the throttle body.
(6) Disconnect the throttle position sensor.
(7) Remove the screws that are holding the throttle body in the assembly.
(8) Remove the throttle body carefully after disconnecting everything.
(9) Properly clean the assembly and port to remove any carbon build up.
(10) Compare the old throttle body with the new one.
(11) Install the throttle body in the port.
(12) Fasten the bolts and screws to hold it in place.
(13) Connect all the things that you previously removed.
(14) After connecting everything start your engine and test for the new throttle body.
(15) Perform the following check as a final test. Start the engine and take the car for a test drive. On your return, let the engine idle for about two minutes and listen for problems in the idle, ensuring that it is smooth. If it is not, then there may be additional problems throughout your engine.
Q: What is throttle body relearn?
Idle Relearn (aka throttle body relearn) is the procedure that is required to obtain the correct idle speed after replacing electronic throttle body, disconnecting a battery cable, clearing a check engine light, etc. The symptoms are, idle is too low, too high, or erratic. Sometimes the engine stalls when you stop at the traffic light. And you may see the check engine light come on with the idle speed related trouble codes.
Q: Why does Idle Relearn need?
Many newer vehicles use an electronic throttle body which contains a throttle plate, motor, and sensors. They are responsible for regulating all air flow into the engine, including the air flow for maintaining idle speed. When idling, the vehicles computer sends a signal to the throttle body and controls the throttle plate to adjust the idle speed depending on the engine temperature and whether AC is on or off. When the computer loses the connection to the throttle body, it loses the position of the throttle plate. Thus, the vehicle computer needs to relearn the throttle plate after losing connection to it.
Q: When is Idle Relearn required?
As mentioned above, Idle Relearn is required when the vehicle computer loses the connection to a throttle body. And, many things cause it to happen.
Disconnecting a battery cable
A battery dies
Replacing a battery
Clearing the check engine light
Replace an electronic throttle body
Cleaning an electronic throttle body in an inappropriate way
etc…
Note: Please note that it doesn’t mean that you will need the idle relearn after these repairs or incidents. It totally depends on models of vehicles.
Q: Does my car need Idle Relearn?
In general, the procedure of idle relearn is necessary on vehicles with electronic throttle body (=ETB aka DBW Drive-By-Wire).
If you are experiencing a rough idle on your vehicle after you disconnect a battery for any reasons, you need to perform the idle relearn procedure.
Q: How can you get the procedure of idle relearn?
Unfortunately, not all repair manuals have the information about idle relearn. And you may or may not find it in the owner’s manuals. So where can you find it? Go online, search “idle relearn + make, model, and year of your vehicle,” and you may get results. If not, search “idle relearn + make” only. The procedure may be the same among all vehicles from the same manufacturer.
| Item Specifics | |
|---|---|
| Brand | SCITOO |
| Manufacturer Part Number | CB118113S01 |
| Fitment Type | Direct Replacement |
| Bore Diameter | 57MM |
| Connector Quantity | 1 |
| Fuel System Type | FI |
| Gaskets Included | No |
| Connector Type | Plug |
| Throttle Body Actuation Type | Electrical |
| Items Included | One Complete Throttle Body w/Sensor |
| Packaging Type | Box |
| Modified Item | No |
| Custom Bundle | No |
| Placement on Vehicle | Front |
| Non-Domestic Product | Yes |
| Mounting Hardware Included | No |
| Manufacturer Warranty | 1 Year |
| Superseded Part Number | 677016 |
| Fuel Type | Gasoline |
| Type | Throttle Body |
| Features | Electronic |
| OE/OEM Part Number | 68366012AB, 68366012AA |
| Note | Single Row Connector |
1. Order Processing
Orders are processed within 2 business days of payment confirmation. Please ensure your shipping and payment information is correct before completing checkout. Once payment is confirmed, we are unable to make any changes to your order.
2. Domestic Shipping (US)
All domestic orders are shipped from our US warehouse via USPS, UPS, or FedEx. Delivery typically takes 2–7 business days depending on your location and the shipping method selected.
3. Local Pickup
Local pickup is not available at this time.
4. International Buyers – Please Note
a. Import duties, taxes, and customs charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
b. Please check with your country's customs office to determine any additional costs before bidding or purchasing.
We accept multiple payment methods.
Payment is due within 7 days of the auction closing. If you are purchasing multiple items, please wait for a combined invoice before paying.
If payment is not received within 7 days, an Unpaid Item Case will be opened with eBay, which may result in a strike against your account.
We offer a 60-day return or exchange guarantee on all brand-new items. Items must be returned in original, unused condition. Buyer pays return shipping unless the item is defective or damaged. Refunds are processed within 2 business days of receipt.
Q: When will my item ship?
A: Orders are processed and shipped within 2 business days of payment confirmation.
Q: Where can I find my tracking number?
A: You can find your tracking number in two ways:
Log in to your eBay account, go to "My eBay" → "Purchase History", and select the order. Check your email for the shipping confirmation notification sent by eBay.
Q: How do I return an item?
A: We accept returns within 60 days of delivery. To initiate a return, please contact our customer service first. Items must be returned in original, unused condition with all packaging and accessories. A full refund will be issued to your original payment method after we receive and inspect the returned item.
We leave positive feedback upon receipt of payment. If you have any issues, please contact us before leaving feedback — we will resolve any problems to your satisfaction. If you are happy with your purchase, please take a moment to leave us positive feedback. Thank you!
Shop Category New List Item
Hot Item
Warranty
|
Throttle Body For Dodge Journey 2.4L 2020 2019 2018 68366012AA
Fits Applications For Dodge Journey 2.4L 2019-2020
Throttle Body the usual parts Throttle position sensor Flange Butterfly valve Throttle control valve Accelerator pedal position sensor
The mechanic will replace the throttle body on your car if: It can’t be cleaned properly. The throttle flap, throttle shaft, or the mechanical linkages to the throttle cable are damaged. The electronic throttle actuator is faulty. There is a damaged throttle body or TP sensor electrical connector.
Additionally, it’d be a good idea to get your cars throttle and fuel delivery system inspected for: A faulty throttle position sensor Gas pedal sensor problems Intake manifold pressure sensor issues A clogged air filter A bad Mass Airflow sensor (MAF sensor) A failing fuel pump A malfunctioning fuel injector A defective fuel pressure regulator These parts can cause problems similar to bad throttle body symptoms.
How is Throttle Body Replacement Done?
You will need: screwdrivers, socket set, spanners, needle pointed pliers. Throttle Body Replacement (1) Refer to the service manual for identification and location of the throttle body. (2) Remove the air intake duct from the throttle body once it is located. (3) Check the throttle body as well as the assembly and ports. If there is wearing in the assembly it may also require replacement. (4) Pull out the cables from the throttle body. (5) Remove the hoses such as air or vacuum hoses from the throttle body.
(6) Disconnect the throttle position sensor. (7) Remove the screws that are holding the throttle body in the assembly.
(8) Remove the throttle body carefully after disconnecting everything. (9) Properly clean the assembly and port to remove any carbon build up. (10) Compare the old throttle body with the new one.
(11) Install the throttle body in the port. (12) Fasten the bolts and screws to hold it in place. (13) Connect all the things that you previously removed.
(14) After connecting everything start your engine and test for the new throttle body. (15) Perform the following check as a final test. Start the engine and take the car for a test drive. On your return, let the engine idle for about two minutes and listen for problems in the idle, ensuring that it is smooth. If it is not, then there may be additional problems throughout your engine.
Q: What is throttle body relearn? Idle Relearn (aka throttle body relearn) is the procedure that is required to obtain the correct idle speed after replacing electronic throttle body, disconnecting a battery cable, clearing a check engine light, etc. The symptoms are, idle is too low, too high, or erratic. Sometimes the engine stalls when you stop at the traffic light. And you may see the check engine light come on with the idle speed related trouble codes.
Q: Why does Idle Relearn need? Many newer vehicles use an electronic throttle body which contains a throttle plate, motor, and sensors. They are responsible for regulating all air flow into the engine, including the air flow for maintaining idle speed. When idling, the vehicles computer sends a signal to the throttle body and controls the throttle plate to adjust the idle speed depending on the engine temperature and whether AC is on or off. When the computer loses the connection to the throttle body, it loses the position of the throttle plate. Thus, the vehicle computer needs to relearn the throttle plate after losing connection to it.
Q: When is Idle Relearn required? As mentioned above, Idle Relearn is required when the vehicle computer loses the connection to a throttle body. And, many things cause it to happen.
Disconnecting a battery cable A battery dies Replacing a battery Clearing the check engine light Replace an electronic throttle body Cleaning an electronic throttle body in an inappropriate way etc… Note: Please note that it doesn’t mean that you will need the idle relearn after these repairs or incidents. It totally depends on models of vehicles.
Q: Does my car need Idle Relearn? In general, the procedure of idle relearn is necessary on vehicles with electronic throttle body (=ETB aka DBW Drive-By-Wire). If you are experiencing a rough idle on your vehicle after you disconnect a battery for any reasons, you need to perform the idle relearn procedure.
Q: How can you get the procedure of idle relearn? Unfortunately, not all repair manuals have the information about idle relearn. And you may or may not find it in the owner’s manuals. So where can you find it? Go online, search “idle relearn + make, model, and year of your vehicle,” and you may get results. If not, search “idle relearn + make” only. The procedure may be the same among all vehicles from the same manufacturer. Shipping
1. Order Processing 2. Domestic Shipping (US) 3. Local Pickup 4. International Buyers – Please Note Payment
We accept multiple payment methods. Payment is due within 7 days of the auction closing. If you are purchasing multiple items, please wait for a combined invoice before paying. If payment is not received within 7 days, an Unpaid Item Case will be opened with eBay, which may result in a strike against your account. Returns
We offer a 60-day return or exchange guarantee on all brand-new items. Items must be returned in original, unused condition. Buyer pays return shipping unless the item is defective or damaged. Refunds are processed within 2 business days of receipt. Customer Services
Q: When will my item ship? A: Orders are processed and shipped within 2 business days of payment confirmation. Q: Where can I find my tracking number? A: You can find your tracking number in two ways: Log in to your eBay account, go to "My eBay" → "Purchase History", and select the order. Check your email for the shipping confirmation notification sent by eBay. Q: How do I return an item? A: We accept returns within 60 days of delivery. To initiate a return, please contact our customer service first. Items must be returned in original, unused condition with all packaging and accessories. A full refund will be issued to your original payment method after we receive and inspect the returned item. Feedback
We leave positive feedback upon receipt of payment. If you have any issues, please contact us before leaving feedback — we will resolve any problems to your satisfaction. If you are happy with your purchase, please take a moment to leave us positive feedback. Thank you! Copyright of SCITOO-AutoParts . All rights reserved. |
