Universal Weld-On Rear Shock Mount Bracket for Pit Bike, Dirt Bike & Custom Motorcycle

Upgrade or relocate your rear suspension with this heavy-duty weld-on shock mount bracket. Designed for pit bike, dirt bike and custom motorcycle frame fabrication where the original shock mounting position needs to be raised or changed.

Specifications:

• Height: 54mm / 2.1"

• Length: 97mm / 3.8"

• Mounting Hole: M10 (10mm)

• Material: Steel

• Installation: Weld-On (NOT bolt-on)

Included Hardware:

• 1 × M10 x 1.25 x 45mm Flange Bolt

• 1 × M10 Self-Locking Nut

• 2 × Flat Washers (10mm ID)

⚠️ IMPORTANT — Please Measure Before Ordering:

1. Mounting hole diameter — Confirm your shock bolt is M10 (10mm)

2. Bracket height — Check if 54mm / 2.1" fits your frame clearance

3. Bracket length — Confirm 97mm / 3.8" mounting base fits your frame tube

4. Shock eyelet width — Ensure the bracket opening accommodates your shock eyelet

5. Swingarm/frame tube diameter — Verify weld-on surface compatibility

⚠️ Installation Notice: This is a weld-on modification component. Must be installed by a qualified welder or experienced fabricator. Check alignment, weld strength, suspension travel and frame clearance before riding.